[PATCH net-next v2 1/2] dt-bindings: net: add DAPU Telecom DAP8211R(I) PHY binding

[Artem Shimko <a.shimko.dev@gmail.com>]

Add device tree binding documentation for the DAPU Telecom DAP8211R(I)
Gigabit Ethernet PHY.

The PHY supports TX and RX clock delays in 150 ps steps from 0 to 2250 ps,
with a default of 1950 ps if not specified. The dapu,tx-inverted-clk flag
provides a vendor-specific extension for boards where PCB trace length or
MAC requirements necessitate 180-degree clock phase shift.

Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
---
 .../bindings/net/dapu,dap8211r.yaml           | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dapu,dap8211r.yaml

diff --git a/Documentation/devicetree/bindings/net/dapu,dap8211r.yaml b/Documentation/devicetree/bindings/net/dapu,dap8211r.yaml
new file mode 100644
index 000000000000..d4012fa17a1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dapu,dap8211r.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dapu,dap8211r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY
+
+maintainers:
+  - Artem Shimko <a.shimko.dev@gmail.com>
+
+description: |
+  The DAP8211R(I) is a Gigabit Ethernet PHY with RGMII interface,
+  supporting IEEE 802.3az Energy Efficient Ethernet, IEEE 1588 SyncE,
+  and an internal packet generator for diagnostics.
+
+  Specifications:
+    - 10BASE-Te, 100BASE-TX, 1000BASE-T
+    - RGMII with configurable TX/RX clock delays (150 ps steps, 0-2250 ps)
+    - IEEE 802.3az-2010 Energy Efficient Ethernet
+    - IEEE 1588 SyncE support
+    - Internal packet generator and checker for link diagnostics
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    const: ethernet-phy-id0008.011b
+
+  reg:
+    maxItems: 1
+
+  rx-internal-delay-ps:
+    description:
+      RGMII RX clock delay in picoseconds (0 to maximum).
+    multipleOf: 150
+    maximum: 2250
+    default: 1950
+
+  tx-internal-delay-ps:
+    description:
+      RGMII TX clock delay in picoseconds (0 to maximum).
+    multipleOf: 150
+    maximum: 2250
+    default: 1950
+
+  dapu,tx-inverted-clk:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, the RGMII TX clock to the MAC is inverted (180 degree
+      phase shift relative to the data lines). This is a vendor-specific
+      extension for boards where PCB trace length or MAC requirements
+      necessitate clock inversion. Only use this property after hardware
+      signal integrity validation.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@1 {
+            compatible = "ethernet-phy-id0008.011b";
+            reg = <1>;
+            rx-internal-delay-ps = <2100>;
+            tx-internal-delay-ps = <2100>;
+            dapu,tx-inverted-clk;
+        };
+    };
+
-- 
2.43.0