From: Johan Hovold <johan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org, Johan Hovold <johan@kernel.org>,
stable@vger.kernel.org, Mark Brown <broonie@kernel.org>
Subject: [PATCH] USB: phy: fsl-usb: fix missing static keywords
Date: Fri, 17 Jul 2026 17:49:57 +0200 [thread overview]
Message-ID: <20260717154957.1853976-1-johan@kernel.org> (raw)
A recent change enabling compile testing of a Freescale dual-role
controller indirectly enabled a USB PHY driver to be built. That driver
in turn is missing a bunch of static keywords which results in warnings
like:
drivers/usb/phy/phy-fsl-usb.c:105:5: error: no previous prototype for 'write_ulpi' [-Werror=missing-prototypes]
105 | int write_ulpi(u8 addr, u8 data)
| ^~~~~~~~~~
which consequently breaks -Werror builds.
Add the missing static keywords.
Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver")
Cc: stable@vger.kernel.org # 3.0
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/4f9f5ff9-8eaa-4bd5-9331-37119f78e13f@sirena.org.uk
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/phy/phy-fsl-usb.c | 52 +++++++++++++++++------------------
drivers/usb/phy/phy-fsl-usb.h | 6 ++--
2 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 35d79f11b03d..1986f7e9d9be 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -46,7 +46,7 @@
static const char driver_name[] = "fsl-usb2-otg";
-const pm_message_t otg_suspend_state = {
+static const pm_message_t otg_suspend_state = {
.event = 1,
};
@@ -57,11 +57,11 @@ static struct fsl_otg *fsl_otg_dev;
static int srp_wait_done;
/* FSM timers */
-struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
+static struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
*b_ase0_brst_tmr, *b_se0_srp_tmr;
/* Driver specific timers */
-struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
+static struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
*b_srp_wait_tmr, *a_wait_enum_tmr;
static struct list_head active_timers;
@@ -102,7 +102,7 @@ static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
#define fsl_writel(val, addr) writel(val, addr)
#endif /* CONFIG_PPC32 */
-int write_ulpi(u8 addr, u8 data)
+static int write_ulpi(u8 addr, u8 data)
{
u32 temp;
@@ -115,7 +115,7 @@ int write_ulpi(u8 addr, u8 data)
/* Operations that will be called from OTG Finite State Machine */
/* Charge vbus for vbus pulsing in SRP */
-void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
+static void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
{
u32 tmp;
@@ -133,7 +133,7 @@ void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
}
/* Discharge vbus through a resistor to ground */
-void fsl_otg_dischrg_vbus(int on)
+static void fsl_otg_dischrg_vbus(int on)
{
u32 tmp;
@@ -151,7 +151,7 @@ void fsl_otg_dischrg_vbus(int on)
}
/* A-device driver vbus, controlled through PP bit in PORTSC */
-void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
+static void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
{
u32 tmp;
@@ -169,7 +169,7 @@ void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
* Pull-up D+, signalling connect by periperal. Also used in
* data-line pulsing in SRP
*/
-void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
+static void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
{
u32 tmp;
@@ -188,7 +188,7 @@ void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
* port. In host mode, controller will automatically send SOF.
* Suspend will block the data on the port.
*/
-void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
+static void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
{
u32 tmp;
@@ -203,7 +203,7 @@ void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
}
/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
-void fsl_otg_start_pulse(struct otg_fsm *fsm)
+static void fsl_otg_start_pulse(struct otg_fsm *fsm)
{
u32 tmp;
@@ -219,7 +219,7 @@ void fsl_otg_start_pulse(struct otg_fsm *fsm)
fsl_otg_add_timer(fsm, b_data_pulse_tmr);
}
-void b_data_pulse_end(unsigned long foo)
+static void b_data_pulse_end(unsigned long foo)
{
#ifdef HA_DATA_PULSE
#else
@@ -230,7 +230,7 @@ void b_data_pulse_end(unsigned long foo)
fsl_otg_pulse_vbus();
}
-void fsl_otg_pulse_vbus(void)
+static void fsl_otg_pulse_vbus(void)
{
srp_wait_done = 0;
fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1);
@@ -238,7 +238,7 @@ void fsl_otg_pulse_vbus(void)
fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr);
}
-void b_vbus_pulse_end(unsigned long foo)
+static void b_vbus_pulse_end(unsigned long foo)
{
fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0);
@@ -251,7 +251,7 @@ void b_vbus_pulse_end(unsigned long foo)
fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr);
}
-void b_srp_end(unsigned long foo)
+static void b_srp_end(unsigned long foo)
{
fsl_otg_dischrg_vbus(0);
srp_wait_done = 1;
@@ -266,7 +266,7 @@ void b_srp_end(unsigned long foo)
* a_host will start by SRP. It needs to set b_hnp_enable before
* actually suspending to start HNP
*/
-void a_wait_enum(unsigned long foo)
+static void a_wait_enum(unsigned long foo)
{
VDBG("a_wait_enum timeout\n");
if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
@@ -276,13 +276,13 @@ void a_wait_enum(unsigned long foo)
}
/* The timeout callback function to set time out bit */
-void set_tmout(unsigned long indicator)
+static void set_tmout(unsigned long indicator)
{
*(int *)indicator = 1;
}
/* Initialize timers */
-int fsl_otg_init_timers(struct otg_fsm *fsm)
+static int fsl_otg_init_timers(struct otg_fsm *fsm)
{
/* FSM used timers */
a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
@@ -339,7 +339,7 @@ int fsl_otg_init_timers(struct otg_fsm *fsm)
}
/* Uninitialize timers */
-void fsl_otg_uninit_timers(void)
+static void fsl_otg_uninit_timers(void)
{
/* FSM used timers */
kfree(a_wait_vrise_tmr);
@@ -391,7 +391,7 @@ static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t)
}
/* Add timer to timer list */
-void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
+static void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
{
struct fsl_otg_timer *timer = gtimer;
struct fsl_otg_timer *tmp_timer;
@@ -421,7 +421,7 @@ static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
}
/* Remove timer from the timer list; clear timeout status */
-void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
+static void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
{
struct fsl_otg_timer *timer = gtimer;
struct fsl_otg_timer *tmp_timer, *del_tmp;
@@ -443,7 +443,7 @@ static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
}
/* Reset controller, not reset the bus */
-void otg_reset_controller(void)
+static void otg_reset_controller(void)
{
u32 command;
@@ -455,7 +455,7 @@ void otg_reset_controller(void)
}
/* Call suspend/resume routines in host driver */
-int fsl_otg_start_host(struct otg_fsm *fsm, int on)
+static int fsl_otg_start_host(struct otg_fsm *fsm, int on)
{
struct usb_otg *otg = fsm->otg;
struct device *dev;
@@ -522,7 +522,7 @@ int fsl_otg_start_host(struct otg_fsm *fsm, int on)
* Call suspend and resume function in udc driver
* to stop and start udc driver.
*/
-int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
+static int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
{
struct usb_otg *otg = fsm->otg;
struct device *dev;
@@ -704,7 +704,7 @@ static int fsl_otg_start_hnp(struct usb_otg *otg)
* intact. It needs to have knowledge of some USB interrupts
* such as port change.
*/
-irqreturn_t fsl_otg_isr(int irq, void *dev_id)
+static irqreturn_t fsl_otg_isr(int irq, void *dev_id)
{
struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg;
@@ -830,7 +830,7 @@ static int fsl_otg_conf(struct platform_device *pdev)
}
/* OTG Initialization */
-int usb_otg_start(struct platform_device *pdev)
+static int usb_otg_start(struct platform_device *pdev)
{
struct fsl_otg *p_otg;
struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2);
@@ -1002,7 +1002,7 @@ static void fsl_otg_remove(struct platform_device *pdev)
pdata->exit(pdev);
}
-struct platform_driver fsl_otg_driver = {
+static struct platform_driver fsl_otg_driver = {
.probe = fsl_otg_probe,
.remove = fsl_otg_remove,
.driver = {
diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
index 95bfe7f1b83a..b754077875c3 100644
--- a/drivers/usb/phy/phy-fsl-usb.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -373,6 +373,6 @@ struct fsl_otg_config {
#define FSL_OTG_NAME "fsl-usb2-otg"
-void fsl_otg_add_timer(struct otg_fsm *fsm, void *timer);
-void fsl_otg_del_timer(struct otg_fsm *fsm, void *timer);
-void fsl_otg_pulse_vbus(void);
+static void fsl_otg_add_timer(struct otg_fsm *fsm, void *timer);
+static void fsl_otg_del_timer(struct otg_fsm *fsm, void *timer);
+static void fsl_otg_pulse_vbus(void);
--
2.54.0
reply other threads:[~2026-07-17 15:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260717154957.1853976-1-johan@kernel.org \
--to=johan@kernel.org \
--cc=broonie@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.