All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: linux-acpi@vger.kernel.org, linux-cxl@vger.kernel.org
Cc: rafael@kernel.org, tony.luck@intel.com, bp@alien8.de,
	guohanjun@huawei.com, mchehab@kernel.org,
	xueshuai@linux.alibaba.com, terry.bowman@amd.com,
	sashiko-bot@kernel.org
Subject: [PATCH v3 09/10] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata
Date: Fri, 17 Jul 2026 09:16:46 -0700	[thread overview]
Message-ID: <20260717161647.1493259-10-dave.jiang@intel.com> (raw)
In-Reply-To: <20260717161647.1493259-1-dave.jiang@intel.com>

sashiko-bot flagged that ghes_handle_aer() has the same unvalidated
AER buffer handling plus a 4-byte over-read.

ghes_handle_aer() copies sizeof(struct aer_capability_regs) from the
fixed 96-byte pcie_err->aer_info, reading past the section since the
struct is larger. It also fills the software-only header_len and flit
fields of the embedded struct pcie_tlp_log from raw firmware bytes;
pcie_print_tlp_log() uses them to bound a loop over dw[], so a large
value walks past the array. There is also no check that the section can
hold a struct cper_sec_pcie.

Validate error_data_length, zero the destination, bound the copy to the
96-byte source, and clear header_len and flit. This mirrors the
extlog_print_pcie() fix.

Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260714231835.303081-1-dave.jiang@intel.com?part=3
Fixes: 7e077e6707b3 ("PCI/ERR: Handle TLP Log in Flit mode")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
v3:
- New patch. sashiko's review of v2 flagged the same unvalidated AER
  buffer handling in ghes_handle_aer() that v2 fixed for extlog.
---
 drivers/acpi/apei/ghes.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 1d2966a437bd..bd53509dcab3 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -642,11 +642,14 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 #ifdef CONFIG_ACPI_APEI_PCIEAER
 	struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
 
+	if (gdata->error_data_length < sizeof(*pcie_err))
+		return;
+
 	if (pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
 	    pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO) {
+		struct aer_capability_regs *aer_info;
 		unsigned int devfn;
 		int aer_severity;
-		u8 *aer_info;
 
 		devfn = PCI_DEVFN(pcie_err->device_id.device,
 				  pcie_err->device_id.function);
@@ -664,13 +667,22 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 						  sizeof(struct aer_capability_regs));
 		if (!aer_info)
 			return;
-		memcpy(aer_info, pcie_err->aer_info, sizeof(struct aer_capability_regs));
+
+		/*
+		 * aer_info is a fixed 96-byte buffer, smaller than struct
+		 * aer_capability_regs, so bound the copy to the source. Clear
+		 * the software-only header_len and flit fields afterwards so
+		 * firmware bytes cannot drive the pcie_print_tlp_log() loop over
+		 * dw[] out of bounds.
+		 */
+		memset(aer_info, 0, sizeof(struct aer_capability_regs));
+		memcpy(aer_info, pcie_err->aer_info, sizeof(pcie_err->aer_info));
+		aer_info->header_log.header_len = 0;
+		aer_info->header_log.flit = false;
 
 		aer_recover_queue(pcie_err->device_id.segment,
 				  pcie_err->device_id.bus,
-				  devfn, aer_severity,
-				  (struct aer_capability_regs *)
-				  aer_info);
+				  devfn, aer_severity, aer_info);
 	}
 #endif
 }
-- 
2.55.0


  parent reply	other threads:[~2026-07-17 16:17 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-17 16:16 [PATCH v3 00/10] ACPI: APEI: GHES: Collection of fixes for issues reported by sashiko Dave Jiang
2026-07-17 16:16 ` [PATCH v3 01/10] ACPI: APEI: GHES: Bound CXL event record copy to the firmware section length Dave Jiang
2026-07-17 17:09   ` sashiko-bot
2026-07-17 16:16 ` [PATCH v3 02/10] efi/cper: Reject CPER records with an out-of-range error_data_length Dave Jiang
2026-07-17 17:26   ` sashiko-bot
2026-07-17 16:16 ` [PATCH v3 03/10] ACPI: APEI: GHES: Validate CXL protocol error section length before RAS cap copy Dave Jiang
2026-07-17 17:41   ` sashiko-bot
2026-07-17 16:16 ` [PATCH v3 04/10] ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer Dave Jiang
2026-07-17 17:58   ` sashiko-bot
2026-07-17 16:16 ` [PATCH v3 05/10] ACPI: extlog: Validate PCIe error section length before payload access Dave Jiang
2026-07-17 18:29   ` sashiko-bot
2026-07-17 16:16 ` [PATCH v3 06/10] ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion Dave Jiang
2026-07-17 18:44   ` sashiko-bot
2026-07-17 16:16 ` [PATCH v3 07/10] ACPI: extlog: Fix CONFIG_ACPI_APEI_PCIEAER guard typo Dave Jiang
2026-07-17 19:07   ` sashiko-bot
2026-07-17 21:24   ` Dave Jiang
2026-07-17 16:16 ` [PATCH v3 08/10] ACPI: APEI: GHES: Validate memory error section length before payload access Dave Jiang
2026-07-17 19:23   ` sashiko-bot
2026-07-17 16:16 ` Dave Jiang [this message]
2026-07-17 19:39   ` [PATCH v3 09/10] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata sashiko-bot
2026-07-17 16:16 ` [PATCH v3 10/10] ACPI: extlog: Validate elog record length before walking sections Dave Jiang
2026-07-17 19:57   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260717161647.1493259-10-dave.jiang@intel.com \
    --to=dave.jiang@intel.com \
    --cc=bp@alien8.de \
    --cc=guohanjun@huawei.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rafael@kernel.org \
    --cc=sashiko-bot@kernel.org \
    --cc=terry.bowman@amd.com \
    --cc=tony.luck@intel.com \
    --cc=xueshuai@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.