From: kernel test robot <lkp@intel.com>
To: oe-kbuild@lists.linux.dev
Cc: lkp@intel.com
Subject: arch/powerpc/boot/dts/fsl/mpc8544ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
Date: Fri, 17 Jul 2026 20:02:37 +0800 [thread overview]
Message-ID: <202607171916.Y7RbRYa5-lkp@intel.com> (raw)
::::::
:::::: Manual check reason: "only suspicious fbc files changed"
::::::
BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
CC: linux-kernel@vger.kernel.org
TO: "J. Neuschäfer" <j.ne@posteo.net>
CC: Madhavan Srinivasan <maddy@linux.ibm.com>
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: fce2dfa773ced15f27dd27cd0b482a7473cdcf2a
commit: 2442f10c6eae63392452ab84a813dbc1f87c724d powerpc: dts: Build devicetrees of enabled platforms
date: 6 weeks ago
:::::: branch date: 12 hours ago
:::::: commit date: 6 weeks ago
config: powerpc-randconfig-r133-20260717 (https://download.01.org/0day-ci/archive/20260717/202607171916.Y7RbRYa5-lkp@intel.com/config)
compiler: clang version 24.0.0git (https://github.com/llvm/llvm-project 5c0dfced1adc55429e32b1db08570abd3a219d85)
sparse: v0.6.5-rc1
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260717/202607171916.Y7RbRYa5-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Fixes: 2442f10c6eae ("powerpc: dts: Build devicetrees of enabled platforms")
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/r/202607171916.Y7RbRYa5-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
arch/powerpc/boot/dts/fsl/mpc8544ds.dts:14.9-17.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
arch/powerpc/boot/dts/fsl/pq3-power.dtsi:10.25-12.4: Warning (unit_address_vs_reg): /soc8544@e0000000/power@e0070/soc-clk@24: node has a unit name, but no reg or ranges property
arch/powerpc/boot/dts/fsl/pq3-power.dtsi:13.25-15.4: Warning (unit_address_vs_reg): /soc8544@e0000000/power@e0070/soc-clk@25: node has a unit name, but no reg or ranges property
arch/powerpc/boot/dts/fsl/pq3-power.dtsi:16.25-18.4: Warning (unit_address_vs_reg): /soc8544@e0000000/power@e0070/soc-clk@26: node has a unit name, but no reg or ranges property
arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi:36.10-71.4: Warning (simple_bus_reg): /localbus@e0005000/nor@0,0: simple-bus unit address format error, expected "0"
arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi:82.24-85.5: Warning (unique_unit_address_if_enabled): /soc8544@e0000000/mdio@24520/ethernet-phy@0: duplicate unit-address (also used in node /soc8544@e0000000/mdio@24520/sgmii-phy@0)
arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi:86.24-89.5: Warning (unique_unit_address_if_enabled): /soc8544@e0000000/mdio@24520/ethernet-phy@1: duplicate unit-address (also used in node /soc8544@e0000000/mdio@24520/sgmii-phy@1)
arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi:154.11-204.6: Warning (interrupt_provider): /pcie@e000b000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider
>> arch/powerpc/boot/dts/fsl/mpc8544ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
--
arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:89.11-126.4: Warning (simple_bus_reg): /localbus@ffe05000/nand@2,0: simple-bus unit address format error, expected "200000000"
arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:128.11-132.4: Warning (simple_bus_reg): /localbus@ffe05000/nand@4,0: simple-bus unit address format error, expected "400000000"
arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:134.11-138.4: Warning (simple_bus_reg): /localbus@ffe05000/nand@5,0: simple-bus unit address format error, expected "500000000"
arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:140.11-144.4: Warning (simple_bus_reg): /localbus@ffe05000/nand@6,0: simple-bus unit address format error, expected "600000000"
arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi:164.23-166.4: Warning (simple_bus_reg): /soc8572@ffe00000/gpio-controller@f000: missing or empty reg/ranges property
arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:155.24-158.5: Warning (unique_unit_address_if_enabled): /soc8572@ffe00000/mdio@24520/ethernet-phy@0: duplicate unit-address (also used in node /soc8572@ffe00000/mdio@24520/sgmii-phy@0)
arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:159.24-162.5: Warning (unique_unit_address_if_enabled): /soc8572@ffe00000/mdio@24520/ethernet-phy@1: duplicate unit-address (also used in node /soc8572@ffe00000/mdio@24520/sgmii-phy@1)
arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:163.24-166.5: Warning (unique_unit_address_if_enabled): /soc8572@ffe00000/mdio@24520/ethernet-phy@2: duplicate unit-address (also used in node /soc8572@ffe00000/mdio@24520/sgmii-phy@2)
arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:167.24-170.5: Warning (unique_unit_address_if_enabled): /soc8572@ffe00000/mdio@24520/ethernet-phy@3: duplicate unit-address (also used in node /soc8572@ffe00000/mdio@24520/sgmii-phy@3)
arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi:375.11-425.6: Warning (interrupt_provider): /pcie@ffe08000/pcie@0/uli1575@0/isa@1e: '#interrupt-cells' found, but node is not an interrupt provider
>> arch/powerpc/boot/dts/fsl/mpc8572ds.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2026-07-17 12:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202607171916.Y7RbRYa5-lkp@intel.com \
--to=lkp@intel.com \
--cc=oe-kbuild@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.