All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg KH <gregkh@linuxfoundation.org>
To: "Metehan Günen" <metehangnen@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
	linux-gpio@vger.kernel.org
Subject: Re: [PATCH 1/4] include/uapi/linux: add gxfp_ioctl.h for GXFP5130 fingerprint sensor
Date: Sat, 18 Jul 2026 11:07:47 +0200	[thread overview]
Message-ID: <2026071801-headdress-gab-348e@gregkh> (raw)
In-Reply-To: <20260718081431.25456-2-metehangnen@gmail.com>

On Sat, Jul 18, 2026 at 11:14:28AM +0300, Metehan Günen wrote:
> Define the userspace ABI for the Goodix GXFP5130 eSPI fingerprint sensor
> driver:
> 
>  - struct gxfp_tap_hdr: header prepended to every read(2) record, carries
>    payload length, MP protocol type and a ktime_get_ns() timestamp.
>  - struct gxfp_tx_pkt_hdr: header that userspace prepends to write(2)
>    payloads so the driver can wrap them in the eSPI frame format.
>  - GXFP_IOCTL_FLUSH_RXQ: flush the kernel-side RX record queue.
> 
> Signed-off-by: Metehan Günen <metehangnen@gmail.com>
> ---
>  include/uapi/linux/gxfp_ioctl.h | 43 +++++++++++++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 include/uapi/linux/gxfp_ioctl.h
> 
> diff --git a/include/uapi/linux/gxfp_ioctl.h b/include/uapi/linux/gxfp_ioctl.h
> new file mode 100644
> index 000000000..c9c6c2d48
> --- /dev/null
> +++ b/include/uapi/linux/gxfp_ioctl.h
> @@ -0,0 +1,43 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __UAPI_GXFP_IOCTL_H
> +#define __UAPI_GXFP_IOCTL_H
> +
> +#include <linux/types.h>
> +#include <linux/ioctl.h>
> +
> +#define GXFP_IOCTL_MAGIC 'G'
> +
> +/*
> + * 4-byte MP header + payload must fit GXFP_TX_BUFFER_SIZE(512).
> + */
> +#define GXFP_IOCTL_TX_PAYLOAD_MAX 508u
> +
> +/* Maximum protocol payload bytes exported via read(2) records. */
> +#define GXFP_IOCTL_TAP_PAYLOAD_MAX (128u * 1024u)
> +
> +/*
> + * Stream tap (read/poll) record header.
> + * Followed by `len` bytes of protocol payload.
> + */
> +struct gxfp_tap_hdr {
> +	__u32 len;       /* protocol payload bytes */
> +	__u32 type;      /* MP type */
> +	__u32 _rsvd0;

C variables do not start with _, this isn't rust :)

And are you checking this for 0?

> +	__u64 ts_ns;     /* ktime_get_ns() */
> +	__u8 head16[16]; /* first 16 bytes of payload */
> +};
> +
> +/*
> + * write(2) packet header.
> + * Userspace writes: [gxfp_tx_pkt_hdr][payload bytes]
> + */
> +struct gxfp_tx_pkt_hdr {
> +	__u8 mp_flags;
> +	__u8 _pad0;

Are you checking this for 0?

> +	__u16 payload_len;
> +	__u32 flags;

No definition of what these flags are?

thanks,

greg k-h

  reply	other threads:[~2026-07-18  9:09 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-18  8:14 [PATCH 0/4] drivers/misc: add Goodix GXFP5130 eSPI fingerprint sensor driver Metehan Günen
2026-07-18  8:14 ` [PATCH 1/4] include/uapi/linux: add gxfp_ioctl.h for GXFP5130 fingerprint sensor Metehan Günen
2026-07-18  9:07   ` Greg KH [this message]
2026-07-18  9:08   ` Greg KH
2026-07-18  8:14 ` [PATCH 2/4] drivers/misc: add Goodix GXFP5130 eSPI fingerprint sensor driver Metehan Günen
2026-07-18  9:09   ` Greg KH
2026-07-18  9:12   ` Greg KH
2026-07-18  8:14 ` [PATCH 3/4] Documentation/misc-devices: add gxfp5130.rst Metehan Günen
2026-07-18  9:06   ` Greg KH
2026-07-18  8:14 ` [PATCH 4/4] MAINTAINERS: add entry for GXFP5130 fingerprint sensor driver Metehan Günen
2026-07-18  9:06   ` Greg KH
2026-07-18  9:05 ` [PATCH 0/4] drivers/misc: add Goodix GXFP5130 eSPI " Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026071801-headdress-gab-348e@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=metehangnen@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.