All of lore.kernel.org
 help / color / mirror / Atom feed
From: Muhammad Bilal <meatuni001@gmail.com>
To: Sudip Mukherjee <sudipm.mukherjee@gmail.com>,
	Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-fbdev@vger.kernel.org, linux-staging@lists.linux.dev,
	linux-kernel@vger.kernel.org,
	Muhammad Bilal <meatuni001@gmail.com>
Subject: [PATCH v2] staging: sm750fb: fix mono image source stride mismatch in lynxfb_ops_imageblit()
Date: Sat, 18 Jul 2026 15:31:03 +0500	[thread overview]
Message-ID: <20260718103103.18082-1-meatuni001@gmail.com> (raw)

sm750_hw_imageblit() advances its monochrome source pointer by
src_delta per scanline, and computes the correct rounded-up stride
internally as:

	bytes_per_scan = (width + start_bit + 7) / 8;

Its only caller, lynxfb_ops_imageblit(), instead passed src_delta as
image->width >> 3. For widths not a multiple of 8 this under-counted
the stride, so the source pointer fell further behind the real
per-scanline layout on every line, corrupting the rendered image.

Rather than just fixing the caller's calculation, remove src_delta
as a parameter entirely and have sm750_hw_imageblit() advance by the
bytes_per_scan it already computes for itself. There has only ever
been one caller, and that caller was passing an out-of-sync
derivative of the same width/start_bit values sm750_hw_imageblit()
already has, so keeping stride as a separate parameter served no
purpose beyond letting the two calculations drift apart, which is
exactly what happened here.

Fixes: 81dee67e215b2 ("staging: sm750fb: add sm750 to staging")
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
---
 drivers/staging/sm750fb/sm750.c       | 2 +-
 drivers/staging/sm750fb/sm750.h       | 2 +-
 drivers/staging/sm750fb/sm750_accel.c | 6 ++----
 drivers/staging/sm750fb/sm750_accel.h | 4 +---
 4 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 89c811e0806c..da0b4979a281 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -261,7 +261,7 @@ static void lynxfb_ops_imageblit(struct fb_info *info,
 	spin_lock(&sm750_dev->slock);
 
 	sm750_dev->accel.de_imageblit(&sm750_dev->accel,
-				      image->data, image->width >> 3, 0,
+				      image->data, 0,
 				      base, pitch, bpp,
 				      image->dx, image->dy,
 				      image->width, image->height,
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index d2c522e67f26..83229fe155ec 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -73,7 +73,7 @@ struct lynx_accel {
 			   u32 rop2);
 
 	int (*de_imageblit)(struct lynx_accel *accel, const char *p_srcbuf,
-			    u32 src_delta, u32 start_bit, u32 d_base, u32 d_pitch,
+			    u32 start_bit, u32 d_base, u32 d_pitch,
 			    u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
 			    u32 height, u32 f_color, u32 b_color, u32 rop2);
 
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 0316ea69d009..bac9a209899c 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -288,8 +288,6 @@ static unsigned int de_get_transparency(struct lynx_accel *accel)
  * sm750_hw_imageblit
  * @accel: Acceleration device data
  * @src_buf: pointer to start of source buffer in system memory
- * @src_delta: Pitch value (in bytes) of the source buffer, +ive means top down
- *	      and -ive mean button up
  * @start_bit: Mono data can start at any bit in a byte, this value should be
  *	      0 to 7
  * @dest_base: Address of destination: offset in frame buffer
@@ -304,7 +302,7 @@ static unsigned int de_get_transparency(struct lynx_accel *accel)
  * @rop2: ROP value
  */
 int sm750_hw_imageblit(struct lynx_accel *accel, const char *src_buf,
-		       u32 src_delta, u32 start_bit, u32 dest_base, u32 dest_pitch,
+		       u32 start_bit, u32 dest_base, u32 dest_pitch,
 		       u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
 		       u32 height, u32 fg_color, u32 bg_color, u32 rop2)
 {
@@ -395,7 +393,7 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *src_buf,
 			write_dp_port(accel, *(unsigned int *)remain);
 		}
 
-		src_buf += src_delta;
+		src_buf += bytes_per_scan;
 	}
 
 	return 0;
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index d15a40cacb84..4f609d6af0fa 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -220,8 +220,6 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
 /**
  * sm750_hw_imageblit
  * @pSrcbuf: pointer to start of source buffer in system memory
- * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
- *>-----      and -ive mean button up
  * @startBit: Mono data can start at any bit in a byte, this value should be
  *>-----      0 to 7
  * @dBase: Address of destination: offset in frame buffer
@@ -236,7 +234,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
  * @rop2: ROP value
  */
 int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
-		       u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
+		       u32 startBit, u32 dBase, u32 dPitch,
 		       u32 bytePerPixel, u32 dx, u32 dy, u32 width,
 		       u32 height, u32 fColor, u32 bColor, u32 rop2);
 
-- 
2.55.0


             reply	other threads:[~2026-07-18 10:31 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-18 10:31 Muhammad Bilal [this message]
2026-07-18 11:57 ` [PATCH v2] staging: sm750fb: fix mono image source stride mismatch in lynxfb_ops_imageblit() Dan Carpenter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260718103103.18082-1-meatuni001@gmail.com \
    --to=meatuni001@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=sudipm.mukherjee@gmail.com \
    --cc=teddy.wang@siliconmotion.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.