From: anoduck <anoduck@protonmail.com>
To: u-boot@lists.denx.de
Cc: Tom Rini <trini@konsulko.com>, Sumit Garg <sumit.garg@kernel.org>,
Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
Rick Chen <rick@andestech.com>, Leo <ycliang@andestech.com>,
anoduck <anoduck@protonmail.com>
Subject: [PATCH RFC PineTab-V DTS File v2 1/2] RFC: Pine64 Pinetab-V dts Device Tree File
Date: Sun, 19 Jul 2026 22:02:29 +0000 [thread overview]
Message-ID: <20260719-develop-v2-1-91fdc4cd60a2@protonmail.com> (raw)
In-Reply-To: <20260719-develop-v2-0-91fdc4cd60a2@protonmail.com>
Added compilable PineTab-V device-tree dts file derived from pine64 community distributed dts and additional parameters
Community provided definitions:
- Audio Codec
- Accelerometer
Additional parameters include:
- Definitions for sd-card and on board EMMC devices
- Definitins for power supply to sd-card
Signed-off-by: The Anoduck <anoduck@protonmail.com>
---
.../src/riscv/starfive/jh7110-pine64-pinetabv.dts | 174 ++++++++++-----------
1 file changed, 87 insertions(+), 87 deletions(-)
diff --git a/dts/upstream/src/riscv/starfive/jh7110-pine64-pinetabv.dts b/dts/upstream/src/riscv/starfive/jh7110-pine64-pinetabv.dts
index 07241c75fc2..dd04d9be5a0 100644
--- a/dts/upstream/src/riscv/starfive/jh7110-pine64-pinetabv.dts
+++ b/dts/upstream/src/riscv/starfive/jh7110-pine64-pinetabv.dts
@@ -8,44 +8,44 @@
#include "jh7110-common.dtsi"
/ {
- compatible = "pine64,pinetabv", "starfive,jh7110";
+ compatible = "pine64,pinetabv", "starfive,jh7110";
model = "Pine64 PinetabV";
soc {
- i2c@10030000 {
- compatible = "snps,designware-i2c";
- reg = <0x00 0x10030000 0x00 0x10000>;
- clocks = <0x03 0x8a>;
- clock-names = "ref";
- resets = <0x03 0x4c>;
- interrupts = <0x23>;
- #address-cells = <0x01>;
- #size-cells = <0x00>;
- status = "okay";
- clock-frequency = <0x186a0>;
- i2c-sda-hold-time-ns = <0x12c>;
- i2c-sda-falling-time-ns = <0x1fe>;
- i2c-scl-falling-time-ns = <0x1fe>;
- pinctrl-names = "default";
- pinctrl-0 = <0x17>;
+ i2c@10030000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x00 0x10030000 0x00 0x10000>;
+ clocks = <0x03 0x8a>;
+ clock-names = "ref";
+ resets = <0x03 0x4c>;
+ interrupts = <0x23>;
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ status = "okay";
+ clock-frequency = <0x186a0>;
+ i2c-sda-hold-time-ns = <0x12c>;
+ i2c-sda-falling-time-ns = <0x1fe>;
+ i2c-scl-falling-time-ns = <0x1fe>;
+ pinctrl-names = "default";
+ pinctrl-0 = <0x17>;
- audio-codec@11 {
- compatible = "everest,es8316";
- reg = <0x11>;
- clocks = <0x18>;
- clock-names = "mclk";
- #sound-dai-cells = <0x00>;
- papower-gpio = <0x19 0x32 0x00>;
- hp-det-gpio = <0x19 0x24 0x00>;
- phandle = <0x64>;
- };
+ audio-codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <0x18>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0x00>;
+ papower-gpio = <0x19 0x32 0x00>;
+ hp-det-gpio = <0x19 0x24 0x00>;
+ phandle = <0x64>;
+ };
- accelerometer@18 {
- compatible = "silan,sc7a20";
- reg = <0x18>;
- mount-matrix = "0", "0", "-1", "1", "0", "0", "0", "-1", "0";
- };
- };
+ accelerometer@18 {
+ compatible = "silan,sc7a20";
+ reg = <0x18>;
+ mount-matrix = "0", "0", "-1", "1", "0", "0", "0", "-1", "0";
+ };
+ };
sd_vcc: sd-vcc {
compatible = "regulator-fixed";
regulator-name = "sd_vcc";
@@ -57,59 +57,59 @@
regulator-always-on;
};
- mmc@16010000 {
- compatible = "starfive,jh7110-mmc";
- reg = <0x00 0x16010000 0x00 0x10000>;
- clocks = <0x03 0x5b 0x03 0x5d>;
- clock-names = "biu", "ciu";
- resets = <0x03 0x40>;
- reset-names = "reset";
- interrupts = <0x4a>;
- fifo-depth = <0x20>;
- fifo-watermark-aligned;
- data-addr = <0x00>;
- starfive,sysreg = <0x1f 0x14 0x1a 0x7c000000>;
- status = "okay";
- max-frequency = <0x5f5e100>;
- assigned-clocks = <0x03 0x5d>;
- vmmc-supply = <&sd_vcc>;
- assigned-clock-rates = <0x2faf080>;
- bus-width = <0x08>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- non-removable;
- cap-mmc-hw-reset;
- post-power-on-delay-ms = <0xc8>;
- pinctrl-names = "default";
- pinctrl-0 = <0x3c>;
- vqmmc-supply = <&sd_vcc>;
- };
+ mmc@16010000 {
+ compatible = "starfive,jh7110-mmc";
+ reg = <0x00 0x16010000 0x00 0x10000>;
+ clocks = <0x03 0x5b 0x03 0x5d>;
+ clock-names = "biu", "ciu";
+ resets = <0x03 0x40>;
+ reset-names = "reset";
+ interrupts = <0x4a>;
+ fifo-depth = <0x20>;
+ fifo-watermark-aligned;
+ data-addr = <0x00>;
+ starfive,sysreg = <0x1f 0x14 0x1a 0x7c000000>;
+ status = "okay";
+ max-frequency = <0x5f5e100>;
+ assigned-clocks = <0x03 0x5d>;
+ vmmc-supply = <&sd_vcc>;
+ assigned-clock-rates = <0x2faf080>;
+ bus-width = <0x08>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ non-removable;
+ cap-mmc-hw-reset;
+ post-power-on-delay-ms = <0xc8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <0x3c>;
+ vqmmc-supply = <&sd_vcc>;
+ };
- mmc@16020000 {
- compatible = "starfive,jh7110-mmc";
- reg = <0x00 0x16020000 0x00 0x10000>;
- clocks = <0x03 0x5c 0x03 0x5e>;
- clock-names = "biu", "ciu";
- resets = <0x03 0x41>;
- reset-names = "reset";
- interrupts = <0x4b>;
- fifo-depth = <0x20>;
- fifo-watermark-aligned;
- data-addr = <0x00>;
- starfive,sysreg = <0x1f 0x9c 0x01 0x3e>;
- status = "okay";
- max-frequency = <0x5f5e100>;
- assigned-clocks = <0x03 0x5e>;
- assigned-clock-rates = <0x2faf080>;
- bus-width = <0x04>;
- no-sdio;
- no-mmc;
- cd-gpios = <0x19 0x29 0x01>;
- cap-sd-highspeed;
- post-power-on-delay-ms = <0xc8>;
- pinctrl-names = "default";
- pinctrl-0 = <0x3e>;
- };
- };
+ mmc@16020000 {
+ compatible = "starfive,jh7110-mmc";
+ reg = <0x00 0x16020000 0x00 0x10000>;
+ clocks = <0x03 0x5c 0x03 0x5e>;
+ clock-names = "biu", "ciu";
+ resets = <0x03 0x41>;
+ reset-names = "reset";
+ interrupts = <0x4b>;
+ fifo-depth = <0x20>;
+ fifo-watermark-aligned;
+ data-addr = <0x00>;
+ starfive,sysreg = <0x1f 0x9c 0x01 0x3e>;
+ status = "okay";
+ max-frequency = <0x5f5e100>;
+ assigned-clocks = <0x03 0x5e>;
+ assigned-clock-rates = <0x2faf080>;
+ bus-width = <0x04>;
+ no-sdio;
+ no-mmc;
+ cd-gpios = <0x19 0x29 0x01>;
+ cap-sd-highspeed;
+ post-power-on-delay-ms = <0xc8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <0x3e>;
+ };
+ };
};
--
2.53.0
next prev parent reply other threads:[~2026-07-19 22:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-19 22:02 [PATCH RFC PineTab-V DTS File v2 0/2] Pine64 Pinetab-V Device Tree Support anoduck
2026-07-19 22:02 ` anoduck [this message]
2026-07-19 22:02 ` [PATCH RFC PineTab-V DTS File v2 2/2] RFC: Pine64 Pinetab-V Device Tree File anoduck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260719-develop-v2-1-91fdc4cd60a2@protonmail.com \
--to=anoduck@protonmail.com \
--cc=hal.feng@starfivetech.com \
--cc=minda.chen@starfivetech.com \
--cc=rick@andestech.com \
--cc=sumit.garg@kernel.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.