[PATCH v5 04/11] power: sequencing: pcie-m2: Report power controllability

[Loic Poulain <loic.poulain@oss.qualcomm.com>]

The M.2 Key E connector gates/resets its functions through the
W_DISABLE1# (PCIe/WiFi) and W_DISABLE2# (Bluetooth) signals.
When a signal is not routed to a host GPIO, the corresponding
enable/disable callbacks are no-ops, so the consumer cannot gate
or reset that function on its own.

Implement the .is_controllable() callback on the "uart" and "pcie"
targets so that consumers can query this per instance (based on the
runtime presence of the W_DISABLE2#/W_DISABLE1# GPIOs) via
pwrseq_is_controllable().

Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
---
 drivers/power/sequencing/pwrseq-pcie-m2.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/power/sequencing/pwrseq-pcie-m2.c b/drivers/power/sequencing/pwrseq-pcie-m2.c
index e3ba9169144dabbf0c553c0a4302c3b511fcaaa1..8e4cb778e31f66aa171ad9831d4213e17d2e6145 100644
--- a/drivers/power/sequencing/pwrseq-pcie-m2.c
+++ b/drivers/power/sequencing/pwrseq-pcie-m2.c
@@ -84,6 +84,18 @@ static int pwrseq_pci_m2_e_uart_disable(struct pwrseq_device *pwrseq)
 	return gpiod_set_value_cansleep(ctx->w_disable2_gpio, 1);
 }
 
+static bool pwrseq_pci_m2_e_uart_is_controllable(struct pwrseq_device *pwrseq)
+{
+	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+	/*
+	 * The UART enable is driven through the W_DISABLE2# line. When it is not
+	 * wired up on this connector the enable/disable callbacks are no-ops, so
+	 * the host cannot gate the Bluetooth function on its own.
+	 */
+	return !!ctx->w_disable2_gpio;
+}
+
 static const struct pwrseq_unit_data pwrseq_pcie_m2_e_uart_unit_data = {
 	.name = "uart-enable",
 	.deps = pwrseq_pcie_m2_unit_deps,
@@ -105,6 +117,18 @@ static int pwrseq_pci_m2_e_pcie_disable(struct pwrseq_device *pwrseq)
 	return gpiod_set_value_cansleep(ctx->w_disable1_gpio, 1);
 }
 
+static bool pwrseq_pci_m2_e_pcie_is_controllable(struct pwrseq_device *pwrseq)
+{
+	struct pwrseq_pcie_m2_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+	/*
+	 * The PCIe/WiFi enable is driven through the W_DISABLE1# line. When it
+	 * is not wired up on this connector the enable/disable callbacks are
+	 * no-ops, so the host cannot gate the PCIe/WiFi function on its own.
+	 */
+	return !!ctx->w_disable1_gpio;
+}
+
 static const struct pwrseq_unit_data pwrseq_pcie_m2_e_pcie_unit_data = {
 	.name = "pcie-enable",
 	.deps = pwrseq_pcie_m2_unit_deps,
@@ -133,12 +157,14 @@ static const struct pwrseq_target_data pwrseq_pcie_m2_e_uart_target_data = {
 	.name = "uart",
 	.unit = &pwrseq_pcie_m2_e_uart_unit_data,
 	.post_enable = pwrseq_pcie_m2_e_pwup_delay,
+	.is_controllable = pwrseq_pci_m2_e_uart_is_controllable,
 };
 
 static const struct pwrseq_target_data pwrseq_pcie_m2_e_pcie_target_data = {
 	.name = "pcie",
 	.unit = &pwrseq_pcie_m2_e_pcie_unit_data,
 	.post_enable = pwrseq_pcie_m2_e_pwup_delay,
+	.is_controllable = pwrseq_pci_m2_e_pcie_is_controllable,
 };
 
 static const struct pwrseq_target_data pwrseq_pcie_m2_m_pcie_target_data = {

-- 
2.34.1