From: chong li <chongli2@amd.com>
To: <amd-gfx@lists.freedesktop.org>
Cc: <Alexander.Deucher@amd.com>, chong li <chongli2@amd.com>
Subject: [PATCH] drm/amdgpu: reduce early full GPU access during SR-IOV init
Date: Mon, 20 Jul 2026 11:44:30 +0800 [thread overview]
Message-ID: <20260720034430.786535-1-chongli2@amd.com> (raw)
Allow early FB reads to fall back to BAR0 when the VRAM aperture is not ready.
This lets SR-IOV VFs consume host-provided init data before requesting full GPU access.
For ASICs that support request_init_data,
defer full GPU access until after non-GPU early init to shorten the full-access window.
Legacy ASICs(before NV12) do not send request_init_data;
the host dumps init data only during full GPU access,
so keep the original early full-access request path for them.
Signed-off-by: chong li <chongli2@amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 86 ++++++++++++++++++++--
drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c | 7 +-
2 files changed, 86 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 5442a1fc1c37..2e7aed5a93d5 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -743,6 +743,62 @@ void amdgpu_device_mm_access(struct amdgpu_device *adev, loff_t pos,
drm_dev_exit(idx);
}
+/*
+ * During early SR-IOV VF init, host-provided init data can live in FB before
+ * the normal VRAM aperture mapping is ready. Use a temporary BAR0 mapping for
+ * reads only, and verify it matches the VRAM aperture when aperture information
+ * is already available.
+ */
+static int amdgpu_device_read_fb_via_bar0(struct amdgpu_device *adev,
+ u64 offset, void *buf, size_t size)
+{
+ resource_size_t aper_base, aper_size, bar_start, bar_size, map_base;
+ void __iomem *vram;
+ size_t map_offset, map_size;
+ unsigned long flags;
+ u64 end;
+
+ if (!buf || !size)
+ return -EINVAL;
+
+ flags = pci_resource_flags(adev->pdev, 0);
+ if ((flags & IORESOURCE_UNSET) || !(flags & IORESOURCE_MEM))
+ return -EINVAL;
+
+ bar_start = pci_resource_start(adev->pdev, 0);
+ bar_size = pci_resource_len(adev->pdev, 0);
+ if (!bar_size)
+ return -ENODEV;
+
+ aper_base = adev->gmc.aper_base;
+ aper_size = adev->gmc.visible_vram_size ? adev->gmc.visible_vram_size :
+ adev->gmc.aper_size;
+
+ if (aper_base || aper_size) {
+ if (aper_base != bar_start || aper_size > bar_size)
+ return -EINVAL;
+ } else {
+ aper_base = bar_start;
+ aper_size = bar_size;
+ }
+
+ if (check_add_overflow(offset, size, &end) || end > aper_size)
+ return -EINVAL;
+
+ map_offset = offset_in_page(offset);
+ map_base = aper_base + (offset & PAGE_MASK);
+ map_size = PAGE_ALIGN(map_offset + size);
+
+ vram = ioremap_wc(map_base, map_size);
+ if (!vram)
+ return -ENOMEM;
+
+ memcpy_fromio(buf, (u8 __iomem *)vram + map_offset, size);
+ iounmap(vram);
+
+ return 0;
+}
+
/**
* amdgpu_device_aper_access - access vram by vram aperture
*
@@ -762,8 +818,12 @@ size_t amdgpu_device_aper_access(struct amdgpu_device *adev, loff_t pos,
size_t count = 0;
uint64_t last;
- if (!adev->mman.aper_base_kaddr)
+ if (!adev->mman.aper_base_kaddr) {
+ /* Writes still require the regular aperture/MM path. */
+ if (!write && !amdgpu_device_read_fb_via_bar0(adev, pos, buf, size))
+ return size;
return 0;
+ }
last = min(pos + size, adev->gmc.visible_vram_size);
if (last > pos) {
@@ -1946,16 +2006,25 @@ static int amdgpu_device_ip_early_init(struct amdgpu_device *adev)
{
struct amdgpu_ip_block *ip_block;
struct pci_dev *parent;
- bool total, skip_bios;
+ bool total, skip_bios, early_full_gpu_access = false;
uint32_t bios_flags;
int i, r;
amdgpu_device_enable_virtual_display(adev);
if (amdgpu_sriov_vf(adev)) {
- r = amdgpu_virt_request_full_gpu(adev, true);
- if (r)
- return r;
+ /*
+ * Legacy hosts do not provide init data before early init, so
+ * keep the original early full GPU access request for them. Newer
+ * hosts publish the init data through VF FB, which lets us defer
+ * full GPU access until after non-GPU early init work is done.
+ */
+ early_full_gpu_access = (adev->virt.req_init_data_ver == 0);
+ if (early_full_gpu_access) {
+ r = amdgpu_virt_request_full_gpu(adev, true);
+ if (r)
+ return r;
+ }
r = amdgpu_virt_init_critical_region(adev);
if (r)
@@ -2118,6 +2187,13 @@ static int amdgpu_device_ip_early_init(struct amdgpu_device *adev)
if (!total)
return -ENODEV;
+ /* Request full GPU access only for the remaining SR-IOV init work. */
+ if (amdgpu_sriov_vf(adev) && !early_full_gpu_access) {
+ r = amdgpu_virt_request_full_gpu(adev, true);
+ if (r)
+ return r;
+ }
+
if (adev->gmc.xgmi.supported)
amdgpu_xgmi_early_init(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
index 9a40107a0869..fec08f235b92 100644
--- a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
+++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
@@ -185,8 +185,11 @@ static int xgpu_ai_send_access_requests(struct amdgpu_device *adev,
} else if (req == IDH_REQ_GPU_INIT_DATA){
/* Dummy REQ_GPU_INIT_DATA handling */
r = xgpu_ai_poll_msg(adev, IDH_REQ_GPU_INIT_DATA_READY);
- /* version set to 0 since dummy */
- adev->virt.req_init_data_ver = 0;
+ /*
+ * AI uses the GPU_CRIT_REGION_V1 layout in practice, so fix the
+ * dummy version value to match the actual init-data format.
+ */
+ adev->virt.req_init_data_ver = GPU_CRIT_REGION_V1;
}
return 0;
--
2.48.1
reply other threads:[~2026-07-20 3:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260720034430.786535-1-chongli2@amd.com \
--to=chongli2@amd.com \
--cc=Alexander.Deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.