From: <gregkh@linuxfoundation.org>
To: sven@narfation.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] batman-adv: clean untagged VLAN on netdev registration" failed to apply to 6.1-stable tree
Date: Mon, 20 Jul 2026 14:43:26 +0200 [thread overview]
Message-ID: <2026072026-starboard-problem-44f9@gregkh> (raw)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 8669a550c752d86baebc5fdc83b8ff35c4372c0e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026072026-starboard-problem-44f9@gregkh' --subject-prefix 'PATCH 6.1.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 8669a550c752d86baebc5fdc83b8ff35c4372c0e Mon Sep 17 00:00:00 2001
From: Sven Eckelmann <sven@narfation.org>
Date: Sat, 4 Jul 2026 09:46:09 +0200
Subject: [PATCH] batman-adv: clean untagged VLAN on netdev registration
failure
When an mesh interface is registered, it creates an untagged struct
batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in
this process, another receiver of this notification can veto the
registration. The netdev registration will be aborted because of this veto.
The register_netdevice() call will try to clean up the net_device using
unregister_netdevice_queue() - which only uses the .priv_destructor to
free private resources. In this situation, .dellink will not be called.
The cleanup of the untagged batadv_meshif_vlan must thefore be done in the
destructor to avoid a leak of this object.
Cc: stable@vger.kernel.org
Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
index 8844e40e6a80..67bed3ee77e7 100644
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -259,6 +259,7 @@ int batadv_mesh_init(struct net_device *mesh_iface)
void batadv_mesh_free(struct net_device *mesh_iface)
{
struct batadv_priv *bat_priv = netdev_priv(mesh_iface);
+ struct batadv_meshif_vlan *vlan;
WRITE_ONCE(bat_priv->mesh_state, BATADV_MESH_DEACTIVATING);
@@ -273,6 +274,13 @@ void batadv_mesh_free(struct net_device *mesh_iface)
batadv_mcast_free(bat_priv);
+ /* destroy the "untagged" VLAN */
+ vlan = batadv_meshif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+ if (vlan) {
+ batadv_meshif_destroy_vlan(bat_priv, vlan);
+ batadv_meshif_vlan_put(vlan);
+ }
+
/* Free the TT and the originator tables only after having terminated
* all the other depending components which may use these structures for
* their purposes.
diff --git a/net/batman-adv/mesh-interface.c b/net/batman-adv/mesh-interface.c
index 0b75234521b6..fbfd99268de4 100644
--- a/net/batman-adv/mesh-interface.c
+++ b/net/batman-adv/mesh-interface.c
@@ -595,8 +595,8 @@ int batadv_meshif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid)
* @bat_priv: the bat priv with all the mesh interface information
* @vlan: the object to remove
*/
-static void batadv_meshif_destroy_vlan(struct batadv_priv *bat_priv,
- struct batadv_meshif_vlan *vlan)
+void batadv_meshif_destroy_vlan(struct batadv_priv *bat_priv,
+ struct batadv_meshif_vlan *vlan)
{
/* explicitly remove the associated TT local entry because it is marked
* with the NOPURGE flag
@@ -1091,22 +1091,13 @@ static int batadv_meshif_newlink(struct net_device *dev,
static void batadv_meshif_destroy_netlink(struct net_device *mesh_iface,
struct list_head *head)
{
- struct batadv_priv *bat_priv = netdev_priv(mesh_iface);
struct batadv_hard_iface *hard_iface;
- struct batadv_meshif_vlan *vlan;
while (!list_empty(&mesh_iface->adj_list.lower)) {
hard_iface = netdev_adjacent_get_private(mesh_iface->adj_list.lower.next);
batadv_hardif_disable_interface(hard_iface);
}
- /* destroy the "untagged" VLAN */
- vlan = batadv_meshif_vlan_get(bat_priv, BATADV_NO_FLAGS);
- if (vlan) {
- batadv_meshif_destroy_vlan(bat_priv, vlan);
- batadv_meshif_vlan_put(vlan);
- }
-
unregister_netdevice_queue(mesh_iface, head);
}
diff --git a/net/batman-adv/mesh-interface.h b/net/batman-adv/mesh-interface.h
index 53756c5a45e0..5e1e83e04ffb 100644
--- a/net/batman-adv/mesh-interface.h
+++ b/net/batman-adv/mesh-interface.h
@@ -21,6 +21,8 @@ void batadv_interface_rx(struct net_device *mesh_iface,
bool batadv_meshif_is_valid(const struct net_device *net_dev);
extern struct rtnl_link_ops batadv_link_ops;
int batadv_meshif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid);
+void batadv_meshif_destroy_vlan(struct batadv_priv *bat_priv,
+ struct batadv_meshif_vlan *vlan);
void batadv_meshif_vlan_release(struct kref *ref);
struct batadv_meshif_vlan *batadv_meshif_vlan_get(struct batadv_priv *bat_priv,
unsigned short vid);
next reply other threads:[~2026-07-20 12:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-20 12:43 gregkh [this message]
2026-07-20 13:52 ` [PATCH 6.1.y] batman-adv: clean untagged VLAN on netdev registration failure Sven Eckelmann
2026-07-21 0:56 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026072026-starboard-problem-44f9@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=stable@vger.kernel.org \
--cc=sven@narfation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.