From: Zinc Lim <limzhineng2@gmail.com>
To: Alexander Duyck <alexanderduyck@fb.com>,
Jakub Kicinski <kuba@kernel.org>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Guenter Roeck <linux@roeck-us.net>,
Simon Horman <horms@kernel.org>,
Mohsin Bashir <mohsin.bashr@gmail.com>
Cc: kernel-team@meta.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
zinclim@meta.com, Zinc Lim <limzhineng2@gmail.com>
Subject: [PATCH net-next 6/6] eth: fbnic: firmware notifies hwmon on sensor threshold events
Date: Tue, 21 Jul 2026 15:15:40 -0700 [thread overview]
Message-ID: <20260721221540.648272-7-limzhineng2@gmail.com> (raw)
In-Reply-To: <20260721221540.648272-1-limzhineng2@gmail.com>
The firmware sends an unsolicited message via the new
FBNIC_TLV_MSG_ID_SENSOR_THRESHOLD_EXCEEDED_RESP IPC message when a
temperature or voltage sensor crosses one of its thresholds. Parse this
message and translate it into the corresponding hwmon alarm
(temp1_{min,max,crit}_alarm or in0_{min,max}_alarm) via
hwmon_notify_event(), so userspace listeners are woken on the relevant
sysfs attribute.
fbnic_hwmon_notify_event() is driven from the FW mailbox IRQ path, so it
can run concurrently with hwmon registration and teardown. Guard the
publish/teardown of fbd->hwmon: register publishes it with WRITE_ONCE()
only after a successful registration (and leaves it NULL on failure),
unregister clears it with WRITE_ONCE(NULL) and then
synchronize_irq(fbd->fw_msix_vector) to drain any in-flight mailbox IRQ
before unregistering, and notify_event reads it once with READ_ONCE() and
skips the notification when it is NULL.
Signed-off-by: Zinc Lim <limzhineng2@gmail.com>
---
drivers/net/ethernet/meta/fbnic/fbnic.h | 1 +
drivers/net/ethernet/meta/fbnic/fbnic_fw.c | 54 +++++++++++++++
drivers/net/ethernet/meta/fbnic/fbnic_fw.h | 9 +++
drivers/net/ethernet/meta/fbnic/fbnic_hwmon.c | 68 ++++++++++++++++---
4 files changed, 124 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic.h b/drivers/net/ethernet/meta/fbnic/fbnic.h
index f647ef07704b..4a49c20e4a01 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic.h
+++ b/drivers/net/ethernet/meta/fbnic/fbnic.h
@@ -192,6 +192,7 @@ void fbnic_fw_free_mbx(struct fbnic_dev *fbd);
void fbnic_hwmon_register(struct fbnic_dev *fbd);
void fbnic_hwmon_unregister(struct fbnic_dev *fbd);
+void fbnic_hwmon_notify_event(struct fbnic_dev *fbd, int id, long val);
int fbnic_mac_request_irq(struct fbnic_dev *fbd);
void fbnic_mac_free_irq(struct fbnic_dev *fbd);
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_fw.c b/drivers/net/ethernet/meta/fbnic/fbnic_fw.c
index d814bd4041a0..6dca38076d7b 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_fw.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_fw.c
@@ -1639,6 +1639,57 @@ fbnic_fw_parser_test(void *opaque, struct fbnic_tlv_msg **results)
return err;
}
+static const struct fbnic_tlv_index fbnic_threshold_exceeded_resp_index[] = {
+ FBNIC_TLV_ATTR_S32(FBNIC_FW_TSENE_THERM_EXCEEDED_FLAG),
+ FBNIC_TLV_ATTR_S32(FBNIC_FW_TSENE_VOLT_EXCEEDED_FLAG),
+ FBNIC_TLV_ATTR_S32(FBNIC_FW_TSENE_THERMAL),
+ FBNIC_TLV_ATTR_S32(FBNIC_FW_TSENE_VOLTAGE),
+ FBNIC_TLV_ATTR_LAST
+};
+
+static int fbnic_fw_parse_threshold_exceeded_resp(void *opaque,
+ struct fbnic_tlv_msg **results)
+{
+ bool therm_exceeded, volt_exceeded;
+ struct fbnic_dev *fbd = opaque;
+ s32 value;
+
+ therm_exceeded =
+ fta_get_sint(results, FBNIC_FW_TSENE_THERM_EXCEEDED_FLAG);
+ volt_exceeded =
+ fta_get_sint(results, FBNIC_FW_TSENE_VOLT_EXCEEDED_FLAG);
+
+ if (!therm_exceeded && !volt_exceeded) {
+ dev_err(fbd->dev,
+ "Threshold exceeded message with no flag set\n");
+ return -EINVAL;
+ }
+
+ if (therm_exceeded) {
+ if (!results[FBNIC_FW_TSENE_THERMAL]) {
+ dev_err(fbd->dev,
+ "Thermal threshold exceeded but no value received\n");
+ return -EINVAL;
+ }
+ value = fta_get_sint(results, FBNIC_FW_TSENE_THERMAL);
+ dev_err(fbd->dev, "Thermal threshold exceeded: %d mC\n", value);
+ fbnic_hwmon_notify_event(fbd, FBNIC_SENSOR_TEMP, value);
+ }
+
+ if (volt_exceeded) {
+ if (!results[FBNIC_FW_TSENE_VOLTAGE]) {
+ dev_err(fbd->dev,
+ "Voltage threshold exceeded but no value received\n");
+ return -EINVAL;
+ }
+ value = fta_get_sint(results, FBNIC_FW_TSENE_VOLTAGE);
+ dev_err(fbd->dev, "Voltage threshold exceeded: %d mV\n", value);
+ fbnic_hwmon_notify_event(fbd, FBNIC_SENSOR_VOLTAGE, value);
+ }
+
+ return 0;
+}
+
static const struct fbnic_tlv_parser fbnic_fw_tlv_parser[] = {
FBNIC_TLV_PARSER(TEST, fbnic_tlv_test_index, fbnic_fw_parser_test),
FBNIC_TLV_PARSER(FW_CAP_RESP, fbnic_fw_cap_resp_index,
@@ -1667,6 +1718,9 @@ static const struct fbnic_tlv_parser fbnic_fw_tlv_parser[] = {
FBNIC_TLV_PARSER(TSENE_READ_RESP,
fbnic_tsene_read_resp_index,
fbnic_fw_parse_tsene_read_resp),
+ FBNIC_TLV_PARSER(SENSOR_THRESHOLD_EXCEEDED_RESP,
+ fbnic_threshold_exceeded_resp_index,
+ fbnic_fw_parse_threshold_exceeded_resp),
FBNIC_TLV_PARSER(LOG_MSG_REQ,
fbnic_fw_log_req_index,
fbnic_fw_parse_log_req),
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_fw.h b/drivers/net/ethernet/meta/fbnic/fbnic_fw.h
index 68ffd49e0cdd..87301e608255 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_fw.h
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_fw.h
@@ -227,6 +227,7 @@ enum {
FBNIC_TLV_MSG_ID_QSFP_READ_RESP = 0x39,
FBNIC_TLV_MSG_ID_TSENE_READ_REQ = 0x3C,
FBNIC_TLV_MSG_ID_TSENE_READ_RESP = 0x3D,
+ FBNIC_TLV_MSG_ID_SENSOR_THRESHOLD_EXCEEDED_RESP = 0x40,
FBNIC_TLV_MSG_ID_LOG_SEND_LOGS_REQ = 0x43,
FBNIC_TLV_MSG_ID_LOG_MSG_REQ = 0x44,
FBNIC_TLV_MSG_ID_LOG_MSG_RESP = 0x45,
@@ -296,6 +297,14 @@ enum {
FBNIC_FW_TSENE_MSG_MAX
};
+enum {
+ FBNIC_FW_TSENE_THERM_EXCEEDED_FLAG = 0x0,
+ FBNIC_FW_TSENE_VOLT_EXCEEDED_FLAG = 0x1,
+ FBNIC_FW_TSENE_THERMAL = 0x2,
+ FBNIC_FW_TSENE_VOLTAGE = 0x3,
+ FBNIC_FW_TSENE_EXCEEDED_MSG_MAX,
+};
+
enum {
FBNIC_FW_OWNERSHIP_FLAG = 0x0,
FBNIC_FW_OWNERSHIP_TIME = 0x1,
diff --git a/drivers/net/ethernet/meta/fbnic/fbnic_hwmon.c b/drivers/net/ethernet/meta/fbnic/fbnic_hwmon.c
index c5cddd9cef12..eb910ba47f37 100644
--- a/drivers/net/ethernet/meta/fbnic/fbnic_hwmon.c
+++ b/drivers/net/ethernet/meta/fbnic/fbnic_hwmon.c
@@ -207,6 +207,8 @@ static const struct hwmon_chip_info fbnic_chip_info = {
void fbnic_hwmon_register(struct fbnic_dev *fbd)
{
+ struct device *hwmon;
+
if (!IS_REACHABLE(CONFIG_HWMON))
return;
@@ -214,22 +216,72 @@ void fbnic_hwmon_register(struct fbnic_dev *fbd)
fbd->hwmon_cache.temp_mdeg = FBNIC_SENSOR_NO_DATA;
fbd->hwmon_cache.volt_mv = FBNIC_SENSOR_NO_DATA;
- fbd->hwmon = hwmon_device_register_with_info(fbd->dev, "fbnic",
- fbd, &fbnic_chip_info,
- NULL);
- if (IS_ERR(fbd->hwmon)) {
+ hwmon = hwmon_device_register_with_info(fbd->dev, "fbnic", fbd,
+ &fbnic_chip_info, NULL);
+ if (IS_ERR(hwmon)) {
dev_notice(fbd->dev,
"Failed to register hwmon device %pe\n",
- fbd->hwmon);
- fbd->hwmon = NULL;
+ hwmon);
+ return;
}
+
+ WRITE_ONCE(fbd->hwmon, hwmon);
}
void fbnic_hwmon_unregister(struct fbnic_dev *fbd)
{
+ struct device *hwmon;
+
if (!IS_REACHABLE(CONFIG_HWMON) || !fbd->hwmon)
return;
- hwmon_device_unregister(fbd->hwmon);
- fbd->hwmon = NULL;
+ hwmon = fbd->hwmon;
+ /* Pair with READ_ONCE() in fbnic_hwmon_notify_event(). Publish NULL
+ * and wait for any in-flight FW mailbox IRQ handler to finish so it
+ * cannot dereference the hwmon device after we unregister it.
+ */
+ WRITE_ONCE(fbd->hwmon, NULL);
+ synchronize_irq(fbd->fw_msix_vector);
+
+ hwmon_device_unregister(hwmon);
+}
+
+void fbnic_hwmon_notify_event(struct fbnic_dev *fbd, int id, long val)
+{
+ enum hwmon_sensor_types type;
+ struct device *hwmon;
+ s32 attr = -1;
+
+ switch (id) {
+ case FBNIC_SENSOR_TEMP:
+ type = hwmon_temp;
+
+ if (val <= fbd->fw_cap.temp.min)
+ attr = hwmon_temp_min_alarm;
+ else if (val >= fbd->fw_cap.temp.crit)
+ attr = hwmon_temp_crit_alarm;
+ else if (val >= fbd->fw_cap.temp.max)
+ attr = hwmon_temp_max_alarm;
+
+ break;
+ case FBNIC_SENSOR_VOLTAGE:
+ type = hwmon_in;
+
+ if (val <= fbd->fw_cap.volt.min)
+ attr = hwmon_in_min_alarm;
+ else if (val >= fbd->fw_cap.volt.max)
+ attr = hwmon_in_max_alarm;
+
+ break;
+ default:
+ return;
+ }
+
+ /* Pair with WRITE_ONCE() in fbnic_hwmon_unregister(). Skip the
+ * notification if hwmon failed to register or has already been torn
+ * down.
+ */
+ hwmon = READ_ONCE(fbd->hwmon);
+ if (attr >= 0 && hwmon)
+ hwmon_notify_event(hwmon, type, attr, 0);
}
--
2.53.0-Meta
next prev parent reply other threads:[~2026-07-21 22:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 22:15 [PATCH net-next 0/6] eth: fbnic: expand hwmon sensor support Zinc Lim
2026-07-21 22:15 ` [PATCH net-next 1/6] eth: fbnic: move sensor read logic out of fbnic_mac Zinc Lim
2026-07-22 22:17 ` sashiko-bot
2026-07-21 22:15 ` [PATCH net-next 2/6] eth: fbnic: expose all hwmon attributes unconditionally as read-only Zinc Lim
2026-07-22 22:18 ` sashiko-bot
2026-07-21 22:15 ` [PATCH net-next 3/6] eth: fbnic: cache hwmon sensor readings Zinc Lim
2026-07-22 22:17 ` sashiko-bot
2026-07-21 22:15 ` [PATCH net-next 4/6] eth: fbnic: report temperature and voltage thresholds via hwmon Zinc Lim
2026-07-22 22:18 ` sashiko-bot
2026-07-21 22:15 ` [PATCH net-next 5/6] eth: fbnic: report temperature and voltage alarms " Zinc Lim
2026-07-22 22:17 ` sashiko-bot
2026-07-21 22:15 ` Zinc Lim [this message]
2026-07-22 22:18 ` [PATCH net-next 6/6] eth: fbnic: firmware notifies hwmon on sensor threshold events sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260721221540.648272-7-limzhineng2@gmail.com \
--to=limzhineng2@gmail.com \
--cc=alexanderduyck@fb.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kernel-team@meta.com \
--cc=kuba@kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mohsin.bashr@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=zinclim@meta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.