All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam via U-Boot <u-boot@lists.u-boot-project.org>
To: u-boot@0leil.net
Cc: djw@t-chip.com.cn, sjg@chromium.org, kever.yang@rock-chips.com,
	u-boot@lists.u-boot-project.org, trini@konsulko.com,
	Fabio Estevam <festevam@nabladev.com>
Subject: [PATCH v2 5/5] rockchip: roc-pc-rk3399: Enable redundant environment
Date: Tue, 21 Jul 2026 22:36:42 -0300	[thread overview]
Message-ID: <20260722013642.1011666-5-festevam@gmail.com> (raw)
In-Reply-To: <20260722013642.1011666-1-festevam@gmail.com>

From: Fabio Estevam <festevam@nabladev.com>

Use the final 64 KiB of the first 4 MiB of SPI NOR for two 32 KiB
U-Boot environment copies. Place the primary copy at 0x3f0000 and
the redundant copy at 0x3f8000.

Both copies are aligned to the 4 KiB erase-sector size and together
occupy 0x3f0000 through 0x3fffff. Redundancy protects the environment
against power loss or an interrupted update.

Signed-off-by: Fabio Estevam <festevam@nabladev.com>
---
Changes since v1:
- Improved the commit log.

 configs/roc-pc-rk3399_defconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
index 127b71e97917..8ded89c6388b 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -7,7 +7,7 @@ CONFIG_SPL_I2C=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x8000
-CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ENV_OFFSET=0x3F0000
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-roc-pc"
 CONFIG_OF_LIST="rockchip/rk3399-roc-pc rockchip/rk3399-roc-pc-plus"
@@ -19,6 +19,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_ENV_OFFSET_REDUND=0x3F8000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_DEBUG_UART=y
@@ -42,6 +43,7 @@ CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_REDUNDANT=y
 CONFIG_ENV_RELOC_GD_ENV_ADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
-- 
2.43.0


  parent reply	other threads:[~2026-07-22  1:37 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-22  1:36 [PATCH v2 1/5] mtd: spi-nor-ids: Add XMC XM25QH128C Fabio Estevam via U-Boot
2026-07-22  1:36 ` [PATCH v2 2/5] rockchip: rk3399: Remove ROC-PC regulator overrides Fabio Estevam via U-Boot
2026-07-22 13:53   ` Quentin Schulz via U-Boot
2026-07-22  1:36 ` [PATCH v2 3/5] rockchip: rk3399: Add ROC-PC-PLUS board detection Fabio Estevam via U-Boot
2026-07-22 14:07   ` Quentin Schulz via U-Boot
2026-07-22  1:36 ` [PATCH v2 4/5] rockchip: rk3399: Enable UMS on ROC-PC-PLUS Fabio Estevam via U-Boot
2026-07-22 15:01   ` Quentin Schulz via U-Boot
2026-07-22  1:36 ` Fabio Estevam via U-Boot [this message]
2026-07-22 14:12   ` [PATCH v2 5/5] rockchip: roc-pc-rk3399: Enable redundant environment Quentin Schulz via U-Boot
2026-07-22 10:52 ` [PATCH v2 1/5] mtd: spi-nor-ids: Add XMC XM25QH128C Quentin Schulz via U-Boot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260722013642.1011666-5-festevam@gmail.com \
    --to=u-boot@lists.u-boot-project.org \
    --cc=djw@t-chip.com.cn \
    --cc=festevam@gmail.com \
    --cc=festevam@nabladev.com \
    --cc=kever.yang@rock-chips.com \
    --cc=sjg@chromium.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@0leil.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.