[PATCH v2 3/3] iio: light: gp2ap002: Fix regulator leaks in runtime resume error path

[Nikhil Gautam <nikhilgtr@gmail.com>]

If enabling vio fails, vdd is left enabled; if re-initializing the
sensor fails, both regulators are left enabled.

unwind previously enabled regulators on failure, mirroring the error
handling already used in probe.

Fixes: 97d642e23037c ("iio: light: Add a driver for Sharp GP2AP002x00F")
Signed-off-by: Nikhil Gautam <nikhilgtr@gmail.com>
---
 drivers/iio/light/gp2ap002.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/light/gp2ap002.c b/drivers/iio/light/gp2ap002.c
index e8ba9c00dabb..430336b51f83 100644
--- a/drivers/iio/light/gp2ap002.c
+++ b/drivers/iio/light/gp2ap002.c
@@ -677,7 +677,7 @@ static int gp2ap002_runtime_resume(struct device *dev)
 	ret = regulator_enable(gp2ap002->vio);
 	if (ret) {
 		dev_err(dev, "failed to enable VIO regulator in resume path\n");
-		return ret;
+		goto out_disable_vdd;
 	}
 
 	msleep(20);
@@ -685,13 +685,19 @@ static int gp2ap002_runtime_resume(struct device *dev)
 	ret = gp2ap002_init(gp2ap002);
 	if (ret) {
 		dev_err(dev, "re-initialization failed\n");
-		return ret;
+		goto out_disable_vio;
 	}
 
 	/* Re-activate the IRQ */
 	enable_irq(gp2ap002->irq);
 
 	return 0;
+
+out_disable_vio:
+	regulator_disable(gp2ap002->vio);
+out_disable_vdd:
+	regulator_disable(gp2ap002->vdd);
+	return ret;
 }
 
 static DEFINE_RUNTIME_DEV_PM_OPS(gp2ap002_dev_pm_ops, gp2ap002_runtime_suspend,
-- 
2.39.5