From: Ridong <ridong.chen@linux.dev>
To: Andrew Morton <akpm@linux-foundation.org>,
Johannes Weiner <hannes@cmpxchg.org>
Cc: David Hildenbrand <david@kernel.org>,
Michal Hocko <mhocko@kernel.org>, Qi Zheng <qi.zheng@linux.dev>,
Shakeel Butt <shakeel.butt@linux.dev>,
Lorenzo Stoakes <ljs@kernel.org>,
Kairui Song <kasong@tencent.com>, Barry Song <baohua@kernel.org>,
Axel Rasmussen <axelrasmussen@google.com>,
Yuanchu Xie <yuanchu@google.com>, Wei Xu <weixugc@google.com>,
Zhongkun He <hezhongkun.hzk@bytedance.com>,
Muchun Song <muchun.song@linux.dev>,
Davidlohr Bueso <dave@stgolabs.net>,
Roman Gushchin <roman.gushchin@linux.dev>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Ridong Chen <ridong.chen@linux.dev>,
Ridong Chen <chenridong@xiaomi.com>
Subject: [PATCH v3 4/4] mm/mglru: fix anon-only reclaim evicting file pages when swappiness=max
Date: Thu, 23 Jul 2026 12:57:18 +0800 [thread overview]
Message-ID: <20260723045718.2052070-5-ridong.chen@linux.dev> (raw)
In-Reply-To: <20260723045718.2052070-1-ridong.chen@linux.dev>
From: Ridong Chen <chenridong@xiaomi.com>
The previous patch fixed this issue for the traditional LRU. The same
problem exists in MGLRU [1]: when swappiness=max (SWAPPINESS_ANON_ONLY)
is set, reclaim is expected to evict anonymous pages exclusively, but
file pages can still be reclaimed when anonymous pages cannot be
reclaimed (e.g. no swap and no demotion target).
With SWAPPINESS_ANON_ONLY, get_type_to_scan() always returns
LRU_GEN_ANON and for_each_evictable_type() only iterates the anon type.
But if get_nr_to_scan() does not bail out, evict_folios() still runs and
isolate_folios() falls back to scanning file pages in the !scanned case:
shrink_one
try_to_shrink_lruvec
get_swappiness // returns SWAPPINESS_ANON_ONLY for swappiness=max
get_nr_to_scan
evict_folios
isolate_folios // falls back to file type when !scanned
This wrongly evicts file pages, violating the anon-only semantics.
Fix it the same way as the traditional LRU: keep returning
SWAPPINESS_ANON_ONLY in get_swappiness(), and return 0 from
get_nr_to_scan() when SWAPPINESS_ANON_ONLY is set but anon pages cannot
be reclaimed. This protects file pages from being reclaimed, and as a
side effect avoids the useless scan work.
The test result:
Before fix:
# cat /sys/kernel/mm/lru_gen/enabled
0x0007
# cat memory.stat
anon 204800
file 67108864
...
pgsteal_proactive 0
pgscan_proactive 0
# echo "64M swappiness=max" > memory.reclaim
# cat memory.stat
anon 208896
file 0
...
pgsteal_proactive 16384
pgscan_proactive 16384
After fix:
# cat memory.stat
anon 188416
file 67215360
kernel 1970176
...
pgsteal_proactive 0
pgscan_proactive 0
# echo "64M swappiness=max" > memory.reclaim
-bash: echo: write error: Resource temporarily unavailable
# cat memory.stat
anon 204800
file 67215360
...
pgsteal_proactive 0
pgscan_proactive 0
[1] https://sashiko.dev/#/patchset/20260717113300.214717-1-ridong.chen@linux.dev
Fixes: 68a1436bde00 ("mm: add swappiness=max arg to memory.reclaim for only anon reclaim")
Acked-by: Qi Zheng <qi.zheng@linux.dev>
Signed-off-by: Ridong Chen <chenridong@xiaomi.com>
---
mm/vmscan.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 859655fcf60d..20cb93fd3da8 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2708,6 +2708,10 @@ static int get_swappiness(struct lruvec *lruvec, struct scan_control *sc)
{
struct mem_cgroup *memcg = lruvec_memcg(lruvec);
struct pglist_data *pgdat = lruvec_pgdat(lruvec);
+ int swappiness = sc_swappiness(sc, memcg);
+
+ if (swappiness == SWAPPINESS_ANON_ONLY)
+ return swappiness;
if (!sc->may_swap)
return 0;
@@ -2716,7 +2720,7 @@ static int get_swappiness(struct lruvec *lruvec, struct scan_control *sc)
mem_cgroup_get_nr_swap_pages(memcg) < MIN_LRU_BATCH)
return 0;
- return sc_swappiness(sc, memcg);
+ return swappiness;
}
static int get_nr_gens(struct lruvec *lruvec, int type)
@@ -4921,6 +4925,19 @@ static long get_nr_to_scan(struct lruvec *lruvec, struct scan_control *sc,
struct mem_cgroup *memcg, int swappiness)
{
unsigned long nr_to_scan, evictable;
+ struct pglist_data *pgdat = lruvec_pgdat(lruvec);
+ /*
+ * Proactive reclaim initiated by userspace for anonymous memory only.
+ * SWAPPINESS_ANON_ONLY is set only on the proactive reclaim path, so
+ * warn if it shows up elsewhere. When anon cannot be reclaimed (e.g.
+ * no swap), return 0 instead of falling through and evicting file
+ * pages, which would violate the anon-only semantics.
+ */
+ if (swappiness == SWAPPINESS_ANON_ONLY &&
+ !can_reclaim_anon_pages(memcg, pgdat->node_id, sc)) {
+ WARN_ON_ONCE(!sc->proactive);
+ return 0;
+ }
evictable = lruvec_evictable_size(lruvec, swappiness);
--
2.34.1
next prev parent reply other threads:[~2026-07-23 4:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 4:57 [PATCH v3 0/4] mm/vmscan: fix swappiness=max and clean up per-node proactive reclaim Ridong
2026-07-23 4:57 ` [PATCH v3 1/4] mm/vmscan: fix anon-only reclaim evicting file pages when swappiness=max Ridong
2026-07-23 4:57 ` [PATCH v3 2/4] mm: vmscan: propagate real error code from per-node proactive reclaim Ridong
2026-07-23 4:57 ` [PATCH v3 3/4] mm: vmscan: drop unused gfp_mask parameter from __node_reclaim() Ridong
2026-07-23 4:57 ` Ridong [this message]
2026-07-23 8:57 ` [PATCH v3 4/4] mm/mglru: fix anon-only reclaim evicting file pages when swappiness=max Barry Song
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260723045718.2052070-5-ridong.chen@linux.dev \
--to=ridong.chen@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=axelrasmussen@google.com \
--cc=baohua@kernel.org \
--cc=chenridong@xiaomi.com \
--cc=dave@stgolabs.net \
--cc=david@kernel.org \
--cc=hannes@cmpxchg.org \
--cc=hezhongkun.hzk@bytedance.com \
--cc=kasong@tencent.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mhocko@kernel.org \
--cc=muchun.song@linux.dev \
--cc=qi.zheng@linux.dev \
--cc=roman.gushchin@linux.dev \
--cc=shakeel.butt@linux.dev \
--cc=weixugc@google.com \
--cc=yuanchu@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.