From: Oliver Hartkopp <socketcan@hartkopp.net>
To: stable@vger.kernel.org
Cc: Oliver Hartkopp <socketcan@hartkopp.net>,
Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH 9/9] can: bcm: track a single source interface for ANYDEV timeout/throttle ops
Date: Fri, 24 Jul 2026 10:37:56 +0200 [thread overview]
Message-ID: <20260724083756.12430-10-socketcan@hartkopp.net> (raw)
In-Reply-To: <2026072020-crepe-unworldly-1d53@gregkh>
commit 2f5976f54a04e9f18b25283036ac3136be453b17 upstream.
An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or
throttle timer has no defined semantics when matching frames arrive
from several interfaces: bcm_rx_handler() can run concurrently for
the same op on different CPUs, racing hrtimer_cancel()/
bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing
spurious RX_TIMEOUT notifications and last_frames corruption. The
same concurrency lets throttled multiplex frames from different
interfaces clobber the single rx_ifindex/rx_stamp fields shared by
the op.
Add op->if_detected to track the first interface that delivers a
matching frame while a timeout/throttle timer is configured, and
reject frames from any other interface for that op. The claim is
decided in bcm_rx_handler() before hrtimer_cancel() touches
op->timer, so a rejected frame can never disturb the claimed
interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME,
independent of kt_ival1/kt_ival2, since those may briefly hold a
stale value from an earlier non-RTR configuration.
The claim is released in bcm_notify() on NETDEV_UNREGISTER and in
bcm_rx_setup() when SETTIMER reconfigures the timer values.
A (re-)claim is only possible on CAN devices in NETREG_REGISTERED
dev->reg_state to cover the release in bcm_notify() where reg_state
becomes NETREG_UNREGISTERING until synchronize_net().
Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-can/20260709105031.1A39C1F000E9@smtp.kernel.org/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260714-bcm_fixes-v15-11-562f7e3e42da@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
net/can/bcm.c | 49 ++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 44 insertions(+), 5 deletions(-)
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 0db9c48..8b739fa 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -114,6 +114,7 @@ struct bcm_op {
struct hrtimer timer, thrtimer;
ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg;
int rx_ifindex;
+ int if_detected; /* first received ifindex in ANYDEV rx_op mode */
int cfsiz;
u32 count;
u32 nframes;
@@ -753,6 +754,33 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
if (skb->len != op->cfsiz)
return;
+ /* An ANYDEV op with an active RX timeout and/or throttle timer
+ * tracks a single source interface: claim the first interface that
+ * delivers a matching frame and reject frames from any other one,
+ * before hrtimer_cancel() below can touch op->timer - this avoids
+ * racing bcm_rx_timeout_handler() across concurrent interfaces.
+ * RX_RTR_FRAME ops are excluded, as kt_ival1/kt_ival2 may briefly
+ * hold a stale value from an earlier non-RTR configuration.
+ */
+ if (!op->ifindex) {
+ spin_lock_bh(&op->bcm_rx_update_lock);
+
+ if (!(op->flags & RX_RTR_FRAME) &&
+ (op->kt_ival1 || op->kt_ival2)) {
+ /* don't claim to vanishing interface */
+ if (!op->if_detected &&
+ skb->dev->reg_state == NETREG_REGISTERED)
+ op->if_detected = skb->dev->ifindex;
+
+ if (op->if_detected != skb->dev->ifindex) {
+ spin_unlock_bh(&op->bcm_rx_update_lock);
+ return;
+ }
+ }
+
+ spin_unlock_bh(&op->bcm_rx_update_lock);
+ }
+
/* disable timeout */
hrtimer_cancel(&op->timer);
@@ -779,10 +807,9 @@ static void bcm_rx_handler(struct sk_buff *skb, void *data)
*/
bcm_update_rx_stats(op);
- /* save rx timestamp and originator for recvfrom() under lock.
- * For an op subscribed on all interfaces (ifindex == 0)
- * bcm_rx_handler() can run concurrently on different CPUs so
- * the CAN content and the meta data must be bundled correctly.
+ /* save rx timestamp and originator for recvfrom() under lock: an
+ * ANYDEV op without an active timer can still run concurrently on
+ * different CPUs, so content and meta data must be bundled here.
*/
op->rx_stamp = skb->tstamp;
op->rx_ifindex = skb->dev->ifindex;
@@ -1316,6 +1343,7 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
op->kt_ival1 = bcm_timeval_to_ktime(msg_head->ival1);
op->kt_ival2 = bcm_timeval_to_ktime(msg_head->ival2);
op->kt_lastmsg = 0;
+ op->if_detected = 0; /* reclaim ifindex in ANYDEV mode */
}
spin_unlock_bh(&op->bcm_rx_update_lock);
@@ -1719,10 +1747,21 @@ static void bcm_notify(struct bcm_sock *bo, unsigned long msg,
lock_sock(sk);
/* rx_ops: remove device specific receive entries */
- list_for_each_entry(op, &bo->rx_ops, list)
+ list_for_each_entry(op, &bo->rx_ops, list) {
if (op->rx_reg_dev == dev)
bcm_rx_unreg(dev, op);
+ /* release an ANYDEV op's claim (see bcm_rx_handler())
+ * on this now confirmed-gone interface.
+ */
+ if (!op->ifindex) {
+ spin_lock_bh(&op->bcm_rx_update_lock);
+ if (op->if_detected == dev->ifindex)
+ op->if_detected = 0;
+ spin_unlock_bh(&op->bcm_rx_update_lock);
+ }
+ }
+
/* tx_ops: stop device specific cyclic transmissions on the
* vanishing ifindex. Cancelling the timer is enough to stop
* cyclic bcm_can_tx() calls as there is no re-arming.
--
2.43.0
next prev parent reply other threads:[~2026-07-24 8:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-20 15:14 FAILED: patch "[PATCH] can: bcm: track a single source interface for ANYDEV" failed to apply to 5.15-stable tree gregkh
2026-07-24 8:37 ` Oliver Hartkopp [this message]
-- strict thread matches above, loose matches on Subject: below --
2026-07-20 15:14 FAILED: patch "[PATCH] can: bcm: track a single source interface for ANYDEV" failed to apply to 5.10-stable tree gregkh
2026-07-24 8:35 ` [PATCH 9/9] can: bcm: track a single source interface for ANYDEV timeout/throttle ops Oliver Hartkopp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260724083756.12430-10-socketcan@hartkopp.net \
--to=socketcan@hartkopp.net \
--cc=mkl@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.