[PATCH v2 2/2] serial: 8250: Add Airoha SoC UART and HSUART support

[Christian Marangi <ansuelsmth@gmail.com>]

Add support for Airoha AN7523 UART and AN7581 HSUART.

These implement a standard 16550 UART with only some custom logic
for baud rate handling.

Co-developed-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/tty/serial/8250/8250.h        |   6 +
 drivers/tty/serial/8250/8250_airoha.c | 190 ++++++++++++++++++++++++++
 drivers/tty/serial/8250/8250_port.c   |  16 +++
 drivers/tty/serial/8250/Kconfig       |  11 ++
 drivers/tty/serial/8250/Makefile      |   1 +
 5 files changed, 224 insertions(+)
 create mode 100644 drivers/tty/serial/8250/8250_airoha.c

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 77fe0588fd6b..e6b2b9431229 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -73,6 +73,12 @@ struct serial8250_config {
 	unsigned int	flags;
 };
 
+enum uart_port_type {
+	/* Internal 8250 only */
+	UART_PORT_AIROHA		= 124,
+	UART_PORT_AIROHA_HS		= 125,
+};
+
 #define UART_CAP_FIFO	BIT(8)	/* UART has FIFO */
 #define UART_CAP_EFR	BIT(9)	/* UART has EFR */
 #define UART_CAP_SLEEP	BIT(10)	/* UART has IER sleep */
diff --git a/drivers/tty/serial/8250/8250_airoha.c b/drivers/tty/serial/8250/8250_airoha.c
new file mode 100644
index 000000000000..5d6d998bebd6
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_airoha.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Airoha UART driver
+ *
+ * Copyright (c) 2025 Genexis Sweden AB
+ * Author: Benjamin Larsson <benjamin.larsson@genexis.eu>
+ *	   Christian Marangi <ansuelsmth@gmail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/math64.h>
+#include <linux/property.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include "8250.h"
+
+#define UART_AIROHA_BRDL	0
+#define UART_AIROHA_BRDH	1
+#define UART_AIROHA_XINCLKDR	10
+#define UART_AIROHA_XYD		11
+#define   UART_AIROHA_XYD_X	GENMASK(31, 16)
+#define   UART_AIROHA_XYD_Y	GENMASK(15, 0)
+
+struct airoha_8250_priv {
+	int line;
+};
+
+struct airoha_8250_clk_div_info {
+	unsigned int div;
+	u32 mask;
+};
+
+#define UART_BRDL_20M		0x01
+#define UART_BRDH_20M		0x00
+
+#define XINDIV_CLOCK		20000000
+#define XYD_Y			65000
+
+static const struct airoha_8250_clk_div_info airoha_clk_div_info[] = {
+	{ .div = 10, .mask = BIT(2) },
+	{ .div = 4, .mask = BIT(1) },
+	{ .div = 2, .mask = BIT(0) },
+};
+
+static unsigned int airoha_get_divisor(struct uart_port *port,
+				       unsigned int baud,
+				       unsigned int *frac)
+{
+	/* Hardware always uses BRDIV = 1. */
+	*frac = 0;
+
+	return 1;
+}
+
+/*
+ * Airoha UART baud rate calculation logic
+ *
+ * crystal_clock = 20 MHz (fixed frequency)
+ * xindiv_clock = crystal_clock / clock_div
+ * (x/y) = XYD, 32 bit register with 16 bits of x and then 16 bits of y
+ * clock_div = XINCLK_DIVCNT (default set to 10 (0x4)),
+ *           - 3 bit register [ 1, 2, 4, 8, 10, 12, 16, 20 ]
+ *
+ * baud_rate = ((xindiv_clock) * (x/y)) / ([BRDH,BRDL] * 16)
+ *
+ * Selecting divider needs to fulfill
+ * 1.8432 MHz <= xindiv_clk <= APB clock / 2
+ * The clocks are unknown but a divider of value 1 did not result in a valid
+ * waveform.
+ *
+ * XYD_y seems to need to be larger then XYD_x for proper waveform generation.
+ * Setting [BRDH,BRDL] to [0,1] and XYD_y to 65000 gives even values
+ * for usual baud rates.
+ */
+static void airoha_set_divisor(struct uart_port *port, unsigned int baud,
+			       unsigned int quot, unsigned int quot_frac)
+{
+	const struct airoha_8250_clk_div_info *clk_div_info;
+	struct uart_8250_port *up = up_to_u8250p(port);
+	u32 xindiv_clk;
+	u64 xyd_x, nom;
+	int i;
+
+	/* Set DLAB to access the baud rate divider registers (BRDH, BRDL) */
+	serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
+
+	/* Set baud rate calculation defaults (BRDIV ([BRDH,BRDL]) to 1) */
+	serial_port_out(port, UART_AIROHA_BRDL, UART_BRDL_20M);
+	serial_port_out(port, UART_AIROHA_BRDH, UART_BRDH_20M);
+
+	/*
+	 * Calculate XYD_x and XINCLKDR register by searching
+	 * through a table of crystal_clock divisors.
+	 */
+	nom = baud * XYD_Y;
+	for (i = 0 ; i < ARRAY_SIZE(airoha_clk_div_info) ; i++) {
+		clk_div_info = &airoha_clk_div_info[i];
+
+		xindiv_clk = XINDIV_CLOCK / clk_div_info->div;
+		xyd_x = div_u64(nom, xindiv_clk) * 16;
+
+		/* For the HSUART xyd_x needs to be scaled by a factor of 2 */
+		if (port->type == UART_PORT_AIROHA_HS)
+			xyd_x /= 2;
+
+		if (xyd_x < XYD_Y)
+			break;
+	}
+
+	serial_port_out(port, UART_AIROHA_XINCLKDR, clk_div_info->mask);
+	serial_port_out(port, UART_AIROHA_XYD,
+			FIELD_PREP(UART_AIROHA_XYD_X, xyd_x) |
+			FIELD_PREP(UART_AIROHA_XYD_Y, XYD_Y));
+
+	/* Restore normal register access. */
+	serial_port_out(port, UART_LCR, up->lcr);
+}
+
+static int airoha_8250_probe(struct platform_device *pdev)
+{
+	struct uart_8250_port uart = { };
+	struct device *dev = &pdev->dev;
+	struct airoha_8250_priv *priv;
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return dev_err_probe(dev, -EINVAL, "invalid address\n");
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	uart.port.dev = dev;
+	if (device_is_compatible(dev, "airoha,an7581-hsuart"))
+		uart.port.type = UART_PORT_AIROHA_HS;
+	else
+		uart.port.type = UART_PORT_AIROHA;
+	uart.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT |
+			  UPF_FIXED_TYPE | UPF_IOREMAP;
+	uart.port.set_divisor = airoha_set_divisor;
+	uart.port.get_divisor = airoha_get_divisor;
+	uart.port.mapbase = res->start;
+	uart.port.mapsize = resource_size(res);
+
+	ret = uart_read_and_validate_port_properties(&uart.port);
+	if (ret)
+		return ret;
+
+	ret = serial8250_register_8250_port(&uart);
+	if (ret < 0)
+		return ret;
+
+	priv->line = ret;
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static void airoha_8250_remove(struct platform_device *ofdev)
+{
+	struct airoha_8250_priv *priv = platform_get_drvdata(ofdev);
+
+	serial8250_unregister_port(priv->line);
+}
+
+static const struct of_device_id airoha_8250_dt_ids[] = {
+	{ .compatible = "airoha,en7523-uart" },
+	{ .compatible = "airoha,an7581-hsuart" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, airoha_8250_dt_ids);
+
+static struct platform_driver airoha_8250_driver = {
+	.driver = {
+		.name = "8250_airoha",
+		.of_match_table = airoha_8250_dt_ids,
+	},
+	.probe = airoha_8250_probe,
+	.remove = airoha_8250_remove,
+};
+
+module_platform_driver(airoha_8250_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Airoha UART driver");
+MODULE_AUTHOR("Benjamin Larsson <benjamin.larsson@genexis.eu>");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 630deb7dd344..22dd114256b3 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -311,6 +311,22 @@ static const struct serial8250_config uart_config[] = {
 		.rxtrig_bytes	= {1, 8, 16, 30},
 		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
 	},
+	[UART_PORT_AIROHA] = {
+		.name		= "Airoha UART",
+		.fifo_size	= 8,
+		.tx_loadsz	= 1,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_CLEAR_RCVR,
+		.rxtrig_bytes	= {1, 4},
+		.flags		= UART_CAP_FIFO,
+	},
+	[UART_PORT_AIROHA_HS] = {
+		.name		= "Airoha HSUART",
+		.fifo_size	= 128,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_CLEAR_RCVR,
+		.rxtrig_bytes	= {1, 4},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index fc3e58d62233..310da7af7a49 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -337,6 +337,17 @@ config SERIAL_8250_ACORN
 	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
 	  cards.  If unsure, say N.
 
+config SERIAL_8250_AIROHA
+	tristate "Airoha UART support"
+	depends on ARCH_AIROHA || COMPILE_TEST
+	depends on SERIAL_8250
+	help
+	  Selecting this option enables an Airoha SoC specific baud rate
+	  calculation routine on an otherwise 16550 compatible UART hardware.
+
+	  If you have an Airoha based board and want to use the serial port,
+	  say Y to this option. If unsure, say N.
+
 config SERIAL_8250_BCM2835AUX
 	tristate "BCM2835 auxiliar mini UART support"
 	depends on ARCH_BCM2835 || COMPILE_TEST
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 6d21402b4435..83257696ea8a 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_SERIAL_8250_CONSOLE)	+= 8250_early.o
 
 obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
 obj-$(CONFIG_SERIAL_8250_ACORN)		+= 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_AIROHA)	+= 8250_airoha.o
 obj-$(CONFIG_SERIAL_8250_ASPEED_VUART)	+= 8250_aspeed_vuart.o
 obj-$(CONFIG_SERIAL_8250_BCM2835AUX)	+= 8250_bcm2835aux.o
 obj-$(CONFIG_SERIAL_8250_BCM7271)	+= 8250_bcm7271.o
-- 
2.53.0