All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antoni Pokusinski <apokusinski01@gmail.com>
To: alexandre.belloni@bootlin.com, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org
Cc: marex@denx.de, linux-rtc@vger.kernel.org,
	devicetree@vger.kernel.org,
	Antoni Pokusinski <apokusinski01@gmail.com>
Subject: [PATCH v2 1/8] dt-bindings: rtc: abx80x: document ABX81X RTCs
Date: Sat, 25 Jul 2026 16:57:11 +0200	[thread overview]
Message-ID: <20260725145718.14733-2-apokusinski01@gmail.com> (raw)
In-Reply-To: <20260725145718.14733-1-apokusinski01@gmail.com>

Abracon AB0815 and AB1815 are RTC modules with SPI interface.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 .../bindings/rtc/abracon,abx80x.yaml           | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
index 355b0598411a..d105570bcd5a 100644
--- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+title: Abracon ABX80X (I2C) and ABX81X (SPI) ultra low power RTC/Alarm chips
 
 maintainers:
   - linux-rtc@vger.kernel.org
@@ -21,10 +21,12 @@ properties:
       - abracon,ab0803
       - abracon,ab0804
       - abracon,ab0805
+      - abracon,ab0815
       - abracon,ab1801
       - abracon,ab1803
       - abracon,ab1804
       - abracon,ab1805
+      - abracon,ab1815
       - microcrystal,rv1805
 
   reg:
@@ -61,6 +63,7 @@ required:
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - $ref: rtc.yaml#
   - if:
       properties:
@@ -73,6 +76,8 @@ allOf:
                 - abracon,ab1804
                 - abracon,ab0805
                 - abracon,ab1805
+                - abracon,ab0815
+                - abracon,ab1815
     then:
       properties:
         abracon,tc-diode: false
@@ -96,3 +101,14 @@ examples:
             interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
         };
     };
+
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@0 {
+            compatible = "abracon,ab1815";
+            reg = <0>;
+        };
+    };
-- 
2.55.0


  reply	other threads:[~2026-07-25 14:59 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-25 14:57 [PATCH v2 0/8] rtc: abx80x: add support for abx81x Antoni Pokusinski
2026-07-25 14:57 ` Antoni Pokusinski [this message]
2026-07-25 15:04   ` [PATCH v2 1/8] dt-bindings: rtc: abx80x: document ABX81X RTCs Krzysztof Kozlowski
2026-07-25 15:11   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 2/8] rtc: abx80x: move part autodetection before RV1805 configuration Antoni Pokusinski
2026-07-25 15:07   ` sashiko-bot
2026-07-25 19:19     ` Antoni Pokusinski
2026-07-25 14:57 ` [PATCH v2 3/8] rtc: abx80x: properly handle shared IRQs Antoni Pokusinski
2026-07-25 15:14   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 4/8] rtc: abx80x: add irq to struct abx80x_priv Antoni Pokusinski
2026-07-25 15:12   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 5/8] rtc: abx80x: use regmap instead of I2C specific API Antoni Pokusinski
2026-07-25 15:13   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 6/8] rtc: abx80x: replace read-modify-write pattern with regmap helpers Antoni Pokusinski
2026-07-25 15:12   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 7/8] rtc: abx80x: create abx80x_i2c_probe() Antoni Pokusinski
2026-07-25 15:13   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 8/8] rtc: abx80x: add support for ABX81X Antoni Pokusinski
2026-07-25 15:30   ` sashiko-bot
2026-07-25 18:41     ` Antoni Pokusinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260725145718.14733-2-apokusinski01@gmail.com \
    --to=apokusinski01@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.