From: Imran Shaik <imran.shaik@oss.qualcomm.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Richard Cochran <richardcochran@gmail.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: Ajit Pandey <ajit.pandey@oss.qualcomm.com>,
Taniya Das <taniya.das@oss.qualcomm.com>,
Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Imran Shaik <imran.shaik@oss.qualcomm.com>
Subject: [PATCH 3/6] ptp: qcom: Add PTP driver for the Qualcomm TSC hardware
Date: Mon, 27 Jul 2026 19:40:59 +0530 [thread overview]
Message-ID: <20260727-tscss-v1-3-beed14e72510@oss.qualcomm.com> (raw)
In-Reply-To: <20260727-tscss-v1-0-beed14e72510@oss.qualcomm.com>
Add a PTP Hardware Clock driver for the Qualcomm Timestamp Counter (TSC)
hardware found on Qualcomm Lemans and QDU1000 SoCs. The TSC is a free
running hardware counter used for time synchronization, clocked by an AHB
configuration clock and a global counter clock, with the counter resolution
varying across SoCs.
Co-developed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
---
drivers/ptp/Kconfig | 10 ++
drivers/ptp/Makefile | 1 +
drivers/ptp/ptp_qcom_tsc.c | 413 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 424 insertions(+)
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index b93640ca08b7286fd4298519a17d1daf19056498..d3ceb1ee01a505cdd0bd056649d245308fc9f140 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -263,4 +263,14 @@ config PTP_NETC_V4_TIMER
synchronization. It also supports periodic output signal (e.g. PPS)
and external trigger timestamping.
+config PTP_QCOM_TSC
+ tristate "Qualcomm TSC as PTP clock"
+ depends on COMMON_CLK && PTP_1588_CLOCK
+ help
+ This driver adds support for using the Qualcomm Timestamp Counter
+ Subsystem (TSCSS) as a PTP clock.
+
+ To compile this driver as a module, choose M here: the module
+ will be called ptp_qcom_tsc.
+
endmenu
diff --git a/drivers/ptp/Makefile b/drivers/ptp/Makefile
index bdc47e284f14e7e77460ccf4ea30ab20c6df4fe4..ff029323e98f5e7ced55b5000e8555929a6e8e54 100644
--- a/drivers/ptp/Makefile
+++ b/drivers/ptp/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_PTP_1588_CLOCK_OCP) += ptp_ocp.o
obj-$(CONFIG_PTP_DFL_TOD) += ptp_dfl_tod.o
obj-$(CONFIG_PTP_S390) += ptp_s390.o
obj-$(CONFIG_PTP_NETC_V4_TIMER) += ptp_netc.o
+obj-$(CONFIG_PTP_QCOM_TSC) += ptp_qcom_tsc.o
diff --git a/drivers/ptp/ptp_qcom_tsc.c b/drivers/ptp/ptp_qcom_tsc.c
new file mode 100644
index 0000000000000000000000000000000000000000..b29248150388f32f2c2d211f69c11599dc743d78
--- /dev/null
+++ b/drivers/ptp/ptp_qcom_tsc.c
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/platform_device.h>
+
+#define ROLLOVER_VAL 999999999
+#define NSEC_SHIFT 32
+#define PULSE_WIDTH_MASK GENMASK(7, 6)
+#define DRIFT_MAX_RES 0x1FFFF
+#define DRIFT_JUMP_SWALLOW BIT(31)
+#define DRIFT_PERIOD_MASK GENMASK(28, 12)
+#define DRIFT_SUBPERIOD_MASK GENMASK(11, 0)
+#define DRIFT_INTERVAL_US 10
+#define DRIFT_MIN_TIMEOUT_US 5000
+
+#define DRIFT_TIMEOUT_US(period, subperiod, cntr_res) \
+ max_t(u64, div_u64((u64)(period) * (subperiod) * (cntr_res), NSEC_PER_USEC), \
+ DRIFT_MIN_TIMEOUT_US)
+
+struct qcom_tsc_regs {
+ u32 control_cntcr;
+ u32 control_cntcv_lo;
+ u32 control_cntcv_hi;
+ u32 drift_correct_incr_val;
+ u32 drift_correct_duration;
+ u32 drift_correct_cmd;
+ u32 rollover_val;
+ u32 offset_lo;
+ u32 offset_hi;
+ u32 read_cntcv_lo;
+ u32 read_cntcv_hi;
+};
+
+/**
+ * struct qcom_tsc_soc_data - SoC specific TSC hardware capabilities
+ *
+ * @rollover: indicates the counter uses sec/nsec split
+ * @offset_correction: hardware supports one-shot offset correction
+ * @pulse_width: valid pulse width in cycles for drift correction
+ * @cntr_res: TSC counter resolution in nsec
+ * @reg_layout: register layout for this SoC/version
+ */
+struct qcom_tsc_soc_data {
+ bool rollover;
+ bool offset_correction;
+ int pulse_width;
+ int cntr_res;
+ const struct qcom_tsc_regs *reg_layout;
+};
+
+struct qcom_tsc {
+ struct device *dev;
+ void __iomem *base;
+ const struct qcom_tsc_soc_data *soc;
+ struct clk *ahb_clk;
+ struct clk *cntr_clk;
+ struct clk *etu_clk;
+ struct ptp_clock *ptp;
+ struct ptp_clock_info ptp_info;
+ /* Mutex to protect operations from being interrupted */
+ struct mutex lock;
+};
+
+static bool qcom_tsc_is_enabled(struct qcom_tsc *tsc)
+{
+ const struct qcom_tsc_regs *regs = tsc->soc->reg_layout;
+
+ return readl_relaxed(tsc->base + regs->control_cntcr) & BIT(0);
+}
+
+static int qcom_tsc_read_time(struct qcom_tsc *tsc, struct timespec64 *ts)
+{
+ const struct qcom_tsc_regs *regs = tsc->soc->reg_layout;
+ u32 hi, lo;
+
+ if (!qcom_tsc_is_enabled(tsc))
+ return -EINVAL;
+
+ hi = readl_relaxed(tsc->base + regs->read_cntcv_hi);
+ lo = readl_relaxed(tsc->base + regs->read_cntcv_lo);
+
+ if (tsc->soc->rollover) {
+ ts->tv_sec = hi;
+ ts->tv_nsec = lo;
+ } else {
+ u64 ns = ((u64)hi << NSEC_SHIFT) | lo;
+
+ *ts = ns_to_timespec64(ns);
+ }
+
+ return 0;
+}
+
+static int qcom_tsc_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
+{
+ struct qcom_tsc *tsc = container_of(ptp, struct qcom_tsc, ptp_info);
+ int ret;
+
+ mutex_lock(&tsc->lock);
+ ret = qcom_tsc_read_time(tsc, ts);
+ mutex_unlock(&tsc->lock);
+
+ return ret;
+}
+
+static inline void qcom_tsc_split_ts(struct qcom_tsc *tsc, struct timespec64 ts, u32 *hi, u32 *lo)
+{
+ if (tsc->soc->rollover) {
+ *hi = ts.tv_sec;
+ *lo = ts.tv_nsec;
+ } else {
+ u64 ns = timespec64_to_ns(&ts);
+
+ *lo = lower_32_bits(ns);
+ *hi = upper_32_bits(ns);
+ }
+}
+
+static int qcom_tsc_update_counter(struct qcom_tsc *tsc, struct timespec64 ts)
+{
+ const struct qcom_tsc_regs *regs = tsc->soc->reg_layout;
+ u32 regval, hi, lo;
+
+ qcom_tsc_split_ts(tsc, ts, &hi, &lo);
+
+ writel_relaxed(lo, tsc->base + regs->control_cntcv_lo);
+ writel_relaxed(hi, tsc->base + regs->control_cntcv_hi);
+
+ regval = readl_relaxed(tsc->base + regs->control_cntcr);
+ regval |= BIT(0);
+ writel_relaxed(regval, tsc->base + regs->control_cntcr);
+
+ return 0;
+}
+
+static int qcom_tsc_update_offset(struct qcom_tsc *tsc, const struct timespec64 ts)
+{
+ const struct qcom_tsc_regs *regs = tsc->soc->reg_layout;
+ struct timespec64 tod;
+ u32 regval, hi, lo;
+ int ret;
+
+ if (tsc->soc->offset_correction) {
+ qcom_tsc_split_ts(tsc, ts, &hi, &lo);
+
+ writel_relaxed(lo, tsc->base + regs->offset_lo);
+ writel_relaxed(hi, tsc->base + regs->offset_hi);
+
+ return 0;
+ }
+
+ /*
+ * No hardware offset correction support: disable and reload the
+ * counter with the corrected time, as recommended by the hardware
+ * design team.
+ */
+ ret = qcom_tsc_read_time(tsc, &tod);
+ if (ret)
+ return ret;
+
+ regval = readl_relaxed(tsc->base + regs->control_cntcr);
+ regval &= ~BIT(0);
+ writel_relaxed(regval, tsc->base + regs->control_cntcr);
+
+ return qcom_tsc_update_counter(tsc, timespec64_add(tod, ts));
+}
+
+static int qcom_tsc_settime(struct ptp_clock_info *ptp, const struct timespec64 *ts)
+{
+ struct qcom_tsc *tsc = container_of(ptp, struct qcom_tsc, ptp_info);
+ const struct qcom_tsc_regs *regs = tsc->soc->reg_layout;
+ struct timespec64 tod;
+ u32 regval;
+ int ret;
+
+ mutex_lock(&tsc->lock);
+
+ if (qcom_tsc_is_enabled(tsc)) {
+ qcom_tsc_read_time(tsc, &tod);
+ ret = qcom_tsc_update_offset(tsc, timespec64_sub(*ts, tod));
+ mutex_unlock(&tsc->lock);
+ return ret;
+ }
+
+ /* Configure and enable the TSC counter */
+ regval = readl_relaxed(tsc->base + regs->control_cntcr);
+ regval |= FIELD_PREP(PULSE_WIDTH_MASK, tsc->soc->pulse_width);
+ writel_relaxed(regval, tsc->base + regs->control_cntcr);
+
+ if (tsc->soc->rollover)
+ writel_relaxed(ROLLOVER_VAL, tsc->base + regs->rollover_val);
+
+ ret = qcom_tsc_update_counter(tsc, *ts);
+ mutex_unlock(&tsc->lock);
+
+ return ret;
+}
+
+static int qcom_tsc_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct qcom_tsc *tsc = container_of(ptp, struct qcom_tsc, ptp_info);
+ int ret;
+
+ mutex_lock(&tsc->lock);
+ ret = qcom_tsc_update_offset(tsc, ns_to_timespec64(delta));
+ mutex_unlock(&tsc->lock);
+
+ return ret;
+}
+
+static int qcom_tsc_drift_correction(struct qcom_tsc *tsc, long scaled_ppm)
+{
+ const struct qcom_tsc_soc_data *soc = tsc->soc;
+ const struct qcom_tsc_regs *regs = soc->reg_layout;
+ long ppb = scaled_ppm_to_ppb(scaled_ppm);
+ u64 period, incval = 0;
+ u32 regval = 0, subperiod;
+
+ if (ppb < 0) {
+ ppb = -ppb;
+ regval &= ~DRIFT_JUMP_SWALLOW;
+
+ period = div_u64(ppb, soc->cntr_res);
+ if (period >= DRIFT_MAX_RES)
+ period = DRIFT_MAX_RES;
+ } else {
+ regval |= DRIFT_JUMP_SWALLOW;
+
+ period = div_u64(ppb, soc->cntr_res);
+ if (period >= DRIFT_MAX_RES) {
+ period = DRIFT_MAX_RES;
+ incval = soc->cntr_res * 2;
+ } else if (ppb < soc->cntr_res) {
+ incval = soc->cntr_res + ppb;
+ period = 1;
+ } else {
+ incval = soc->cntr_res * 2;
+ }
+ }
+
+ subperiod = soc->pulse_width * 2;
+ regval |= FIELD_PREP(DRIFT_SUBPERIOD_MASK, subperiod);
+ regval |= FIELD_PREP(DRIFT_PERIOD_MASK, period);
+
+ /* Update jump/swallow, period, subperiod */
+ writel_relaxed(regval, tsc->base + regs->drift_correct_duration);
+
+ writel_relaxed(incval, tsc->base + regs->drift_correct_incr_val);
+
+ /* Trigger the drift correction */
+ regval = readl_relaxed(tsc->base + regs->drift_correct_cmd);
+ regval |= BIT(0);
+ writel_relaxed(regval, tsc->base + regs->drift_correct_cmd);
+
+ return readl_poll_timeout(tsc->base + regs->drift_correct_cmd, regval,
+ !(regval & BIT(1)), DRIFT_INTERVAL_US,
+ DRIFT_TIMEOUT_US(period, subperiod, soc->cntr_res));
+}
+
+static int qcom_tsc_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
+{
+ struct qcom_tsc *tsc = container_of(ptp, struct qcom_tsc, ptp_info);
+ int ret;
+
+ if (scaled_ppm == 0)
+ return 0;
+
+ mutex_lock(&tsc->lock);
+ ret = qcom_tsc_drift_correction(tsc, scaled_ppm);
+ mutex_unlock(&tsc->lock);
+
+ return ret;
+}
+
+static struct ptp_clock_info qcom_ptp_info = {
+ .owner = THIS_MODULE,
+ .name = "PTP_QCOM_TSC",
+ .max_adj = 9999999,
+ .adjfine = qcom_tsc_adjfine,
+ .adjtime = qcom_tsc_adjtime,
+ .gettime64 = qcom_tsc_gettime,
+ .settime64 = qcom_tsc_settime,
+};
+
+static const struct qcom_tsc_regs qcom_tsc_layout = {
+ .control_cntcr = 0x0,
+ .control_cntcv_lo = 0x8,
+ .control_cntcv_hi = 0xc,
+ .drift_correct_incr_val = 0x2c,
+ .drift_correct_duration = 0x30,
+ .drift_correct_cmd = 0x34,
+ .rollover_val = 0x3c,
+ .offset_lo = 0x50,
+ .offset_hi = 0x54,
+ .read_cntcv_lo = 0x1000,
+ .read_cntcv_hi = 0x1004,
+};
+
+static const struct qcom_tsc_soc_data qcom_tsc_lemans = {
+ .reg_layout = &qcom_tsc_layout,
+ .rollover = false,
+ .offset_correction = false,
+ .pulse_width = 2,
+ .cntr_res = 64,
+};
+
+static const struct qcom_tsc_soc_data qcom_tsc_qdu1000 = {
+ .reg_layout = &qcom_tsc_layout,
+ .rollover = true,
+ .offset_correction = true,
+ .pulse_width = 3,
+ .cntr_res = 2,
+};
+
+static const struct of_device_id qcom_tsc_of_match[] = {
+ { .compatible = "qcom,lemans-tscss", .data = &qcom_tsc_lemans },
+ { .compatible = "qcom,qdu1000-tscss", .data = &qcom_tsc_qdu1000 },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_tsc_of_match);
+
+static void qcom_ptp_tsc_remove(struct platform_device *pdev)
+{
+ struct qcom_tsc *tsc = platform_get_drvdata(pdev);
+
+ if (tsc && tsc->ptp) {
+ ptp_clock_unregister(tsc->ptp);
+ tsc->ptp = NULL;
+ }
+}
+
+static int qcom_ptp_tsc_probe(struct platform_device *pdev)
+{
+ const struct qcom_tsc_soc_data *soc;
+ struct qcom_tsc *tsc;
+ struct resource *r_mem;
+ int ret;
+
+ soc = of_device_get_match_data(&pdev->dev);
+ if (!soc)
+ return -ENODEV;
+
+ tsc = devm_kzalloc(&pdev->dev, sizeof(*tsc), GFP_KERNEL);
+ if (!tsc)
+ return -ENOMEM;
+
+ tsc->dev = &pdev->dev;
+ tsc->soc = soc;
+
+ ret = devm_mutex_init(&pdev->dev, &tsc->lock);
+ if (ret)
+ return ret;
+
+ r_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tsc");
+ if (!r_mem) {
+ dev_err(&pdev->dev, "no IO resource defined\n");
+ return -ENXIO;
+ }
+
+ tsc->base = devm_ioremap_resource(&pdev->dev, r_mem);
+ if (IS_ERR(tsc->base))
+ return PTR_ERR(tsc->base);
+
+ tsc->ahb_clk = devm_clk_get_enabled(&pdev->dev, "ahb");
+ if (IS_ERR(tsc->ahb_clk))
+ return PTR_ERR(tsc->ahb_clk);
+
+ tsc->cntr_clk = devm_clk_get_enabled(&pdev->dev, "cntr");
+ if (IS_ERR(tsc->cntr_clk))
+ return PTR_ERR(tsc->cntr_clk);
+
+ /* ETU clock is optional, only required when the ETU block is used */
+ tsc->etu_clk = devm_clk_get_optional_enabled(&pdev->dev, "etu");
+ if (IS_ERR(tsc->etu_clk))
+ return PTR_ERR(tsc->etu_clk);
+
+ tsc->ptp_info = qcom_ptp_info;
+
+ tsc->ptp = ptp_clock_register(&tsc->ptp_info, &pdev->dev);
+ if (IS_ERR(tsc->ptp)) {
+ ret = PTR_ERR(tsc->ptp);
+ dev_err(&pdev->dev, "Failed to register ptp clock\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, tsc);
+
+ return 0;
+}
+
+static struct platform_driver qcom_ptp_tsc_driver = {
+ .probe = qcom_ptp_tsc_probe,
+ .remove = qcom_ptp_tsc_remove,
+ .driver = {
+ .name = "qcom_ptp_tsc",
+ .of_match_table = qcom_tsc_of_match,
+ },
+};
+module_platform_driver(qcom_ptp_tsc_driver);
+
+MODULE_DESCRIPTION("PTP QCOM TSC driver");
+MODULE_LICENSE("GPL");
--
2.34.1
next prev parent reply other threads:[~2026-07-27 14:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-27 14:10 [PATCH 0/6] Add support for Qualcomm TSCSS hardware Imran Shaik
2026-07-27 14:10 ` [PATCH 1/6] dt-bindings: ptp: Document the TSCSS on Qualcomm Lemans and Monaco SoCs Imran Shaik
2026-07-27 15:50 ` Krzysztof Kozlowski
2026-07-27 14:10 ` [PATCH 2/6] dt-bindings: ptp: Document TSCSS hardware on Qualcomm QDU1000 SoC Imran Shaik
2026-07-27 15:51 ` Krzysztof Kozlowski
2026-07-27 14:10 ` Imran Shaik [this message]
2026-07-27 15:53 ` [PATCH 3/6] ptp: qcom: Add PTP driver for the Qualcomm TSC hardware Krzysztof Kozlowski
2026-07-27 23:20 ` Jakub Kicinski
2026-07-27 14:11 ` [PATCH 4/6] arm64: defconfig: Enable Qualcomm TSC driver Imran Shaik
2026-07-27 14:11 ` [PATCH 5/6] arm64: dts: qcom: lemans: Add support for TSCSS node Imran Shaik
2026-07-27 14:44 ` Konrad Dybcio
2026-07-27 14:11 ` [PATCH 6/6] arm64: dts: qcom: qdu1000: " Imran Shaik
2026-07-27 15:54 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260727-tscss-v1-3-beed14e72510@oss.qualcomm.com \
--to=imran.shaik@oss.qualcomm.com \
--cc=ajit.pandey@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=jagadeesh.kona@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=taniya.das@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.