From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-ej1-f42.google.com (mail-ej1-f42.google.com [209.85.218.42]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 31B533BE17B for ; Mon, 27 Jul 2026 07:53:30 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.42 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1785138813; cv=none; b=XnWE8W8LIPJZLXcXIbDfiAAfz9AaNOt1Lxm1wA3liIJdwgzISz4OD7YklUtvT42XtiiRgY44rXHNRxInBro5ikL0ay3t0u4nprw/nmLQzOGPurAIoSzuCIXiQWfWfF9tbMmvtZ9+zVxZpq8ZNzZrgP8hS7i5g3Mc+WACfG0VVhM= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1785138813; c=relaxed/simple; bh=RwaSeM2o8U7Yz8AgPwYV2ZMuhpugkxYXZJ/7zGmXh2c=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=ocTzDq+6PsIqWZOI37yx4URc5Uemeb9fQQFHWzL31f9BO8aY3J3FwGMAfUqy2WmPy+Lt+Yw1PZOUu2XUe9X/JH6necjMmnzPYX8Ru8Vv/YLfDzjRx5sgUlxQxRBgxVPJQdNRVhGOCrP5f2LkPewCjMuXkkDBgFmZ1VMLbTLznwE= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=Rbbrg+QQ; arc=none smtp.client-ip=209.85.218.42 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="Rbbrg+QQ" Received: by mail-ej1-f42.google.com with SMTP id a640c23a62f3a-c15f47e6297so235365666b.0 for ; Mon, 27 Jul 2026 00:53:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1785138808; x=1785743608; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to:content-type; bh=Ex9WK7cMQbcLGyCbuvoOK8Ni/e4QYuUFvHwa+Upbhlk=; b=Rbbrg+QQBYZdPr7CUJYmZCdUKu6Q3xfGmY/f7zFSzbvyEcgQHwxaJZtM0Nidf/N2iy aQBOMkSEpLE5E3pGTIY5+uG6kBOI9mVosPv9U7Fetpho+YV2ABiyPvw5ibe8WdQ6/0f0 h3MV+r3awp0EIqQnSFWSfESCT/waBr5wvm5RBAU5cIxMCVY6zNYUWEfl4cRWLVSt0yZ3 l10PFg08v64HkmRJ04um+PLNhASJqczyruLhwUWHCB/tszHtn94dei1PuMc0lGaP75l8 SCqLPxN5LJpQ+OY0bXedM0SVjCcCCPDppdZwKEO4Y+eDbiwrfldkHSMrt/o5oXQkaf17 uV8A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1785138808; x=1785743608; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-gg:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to:content-type; bh=Ex9WK7cMQbcLGyCbuvoOK8Ni/e4QYuUFvHwa+Upbhlk=; b=ZXsIMY/9oseFp6ykmCEl44403n/1yFGCkpNOBd8k5ovRJkyTrJqCJ2+G3QsqUGtZBN MVXLG/qAoIrx18H2tRQ157So6TfjGJ2UEsjnaypwz0r8MGF9Q9Mpf9vkQ2nJhce++SEA ZKj8zn3JqxfztcX8+IifIe12rlulzYh6LLdsop9gvg9rlMVBNuKrl/VpjffSSQiKeAeR genXoj1f+3ktQaLnbRhY4vRownvEZmbiui9AIKxAJLjpVa5mmfb3kztdfoGAtHojpWGT zLYpEilMLDmYl1vtCzoWZLFwUlzGnTUlP1nt7VKXzfQsQz0jFZZnwrwPdLReiI5HWKwk w/7A== X-Forwarded-Encrypted: i=1; AHgh+Rp9y2yxFP7+4murw9DP6ffbagYj3IpKqZdclPLAiDYzzEecBMccQBuIAYMTI/bSm+nPuW5hYG445+Bq@vger.kernel.org X-Gm-Message-State: AOJu0Yw6sLlMKODo918rt9kTqSEeJHyDA+tX45MT+9kfcJgwIQuf7KFc 0PP7Vvva9EfxpCPwCTelxvQsKzBA9e9w+JMq0fCX7+435S4P3cJqxvm/ X-Gm-Gg: AR+sD13iZjOqvaEJySAGeS4sHEUDpjCmXFLLJKqvV2Eaoh4X3sb0b0DcpgBD7ib/laF Ewwr1Srx9ipj3xLPyWjS3f79sgJt4zy2KR98IoiQEQNKcdcMZQKjA8CfQA9QBk4lclMgfB8L0oR TopSKI3g56SpyAoD+Ke/747q5UMiWYwivjpNku4qZLIktZ/SOY+oWiJPge7f2uzFF51vAEawQDA LTdG+9YuAogOuFaaaD3/bWfDJ/RcJdnLntS319PJ8RxG+oCsdyQjS6vkLIDhd6SAGXVeMlh5g+V NbcWo3c/Uur3yTR7S0zvOOlpnhA2mLXKrTPG9y9UFTvlOlAcVi4AiY8LS8BaB+s0TSD6J6hjsKK FUDYJ5IDd1h8yVWYjoLZZsvtlu6c21MySvMVsTJTJyk/2uzMOP5k9HwXNIlrEpXp96B7fuXWc9G JZF/DV49C8rez3cQ== X-Received: by 2002:a17:907:724e:b0:c15:c638:d03c with SMTP id a640c23a62f3a-c1f1f06b45dmr319380866b.47.1785138808192; Mon, 27 Jul 2026 00:53:28 -0700 (PDT) Received: from NB-6746.. ([188.243.183.76]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-c1c32ac0fa4sm596226866b.20.2026.07.27.00.53.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 27 Jul 2026 00:53:27 -0700 (PDT) From: Artem Shimko To: netdev@vger.kernel.org, Andrew Lunn , Heiner Kallweit , Russell King , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Chevallier Cc: Artem Shimko , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH net-next v4 0/2] Add DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY driver Date: Mon, 27 Jul 2026 10:53:22 +0300 Message-ID: <20260727075324.3555446-1-a.shimko.dev@gmail.com> X-Mailer: git-send-email 2.43.0 Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Hello, This series adds support for the DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY, commonly used in enterprise and industrial networking applications. The PHY supports 10/100/1000 Mbps operation with RGMII interface and includes features such as IEEE 802.3az Energy Efficient Ethernet, IEEE 1588 SyncE. The driver implements extended register access via indirect addressing (registers 0x1E/0x1F) and provides comprehensive device tree support for RGMII delay configuration. The rx-internal-delay-ps and tx-internal-delay-ps properties allow precise tuning of clock delays in 150 ps steps from 0 to 2250 ps. This PHY is used on the NDA platform with 1G Ethernet tile and has been tested on that hardware with successful link establishment and RGMII delay tuning. $ make dt_binding_check DT_SCHEMA_FILES=dapu,dap8211r.yaml SCHEMA Documentation/devicetree/bindings/processed-schema.json DTEX Documentation/devicetree/bindings/net/dapu,dap8211r.example.dts DTC [C] Documentation/devicetree/bindings/net/dapu,dap8211r.example.dt $ grep -i "dap8211r" Documentation/devicetree/bindings/processed-schema.json "http://devicetree.org/schemas/net/dapu,dap8211r.yaml": { "$filename": "/home/a-shimko/patchwork/linux/Documentation/devicetree/bindings/net/dapu,dap8211r.yaml", "$id": "http://devicetree.org/schemas/net/dapu,dap8211r.yaml#", "title": "DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY", Working with xgmac. Board side: $ arping -I eth0 192.168.5.100 ARPING 192.168.5.1 from 192.168.5.100 eth0 Unicast reply from 192.168.5.1 [board.mac.addr] 8.543ms Unicast reply from 192.168.5.1 [board.mac.addr] 3.295ms Unicast reply from 192.168.5.1 [board.mac.addr] 4.301ms Unicast reply from 192.168.5.1 [board.mac.addr] 4.096ms Unicast reply from 192.168.5.1 [board.mac.addr] 2.872ms ... Unfortunately, there is a dependence on the axibus speed here $ iperf3 -c 192.168.5.1 Connecting to host 192.168.5.1, port 5201 [ 5] local 192.168.5.100 port 58936 connected to 192.168.5.1 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 7.88 MBytes 65.8 Mbits/sec 0 150 KBytes [ 5] 1.00-2.00 sec 8.50 MBytes 71.4 Mbits/sec 0 165 KBytes [ 5] 2.00-3.00 sec 8.25 MBytes 69.2 Mbits/sec 0 165 KBytes [ 5] 3.00-4.01 sec 8.50 MBytes 71.1 Mbits/sec 0 165 KBytes [ 5] 4.01-5.00 sec 8.38 MBytes 70.3 Mbits/sec 0 165 KBytes [ 5] 5.00-6.00 sec 8.50 MBytes 71.5 Mbits/sec 0 165 KBytes [ 5] 6.00-7.01 sec 8.62 MBytes 72.0 Mbits/sec 0 174 KBytes [ 5] 7.01-8.00 sec 8.62 MBytes 72.8 Mbits/sec 0 174 KBytes [ 5] 8.00-9.00 sec 8.62 MBytes 72.2 Mbits/sec 0 174 KBytes [ 5] 9.00-10.04 sec 8.62 MBytes 69.9 Mbits/sec 0 174 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.04 sec 84.6 MBytes 70.7 Mbits/sec 0 sender [ 5] 0.00-10.12 sec 84.8 MBytes 70.3 Mbits/sec receiveriperf Done. $ ethtool -t eth0 ... The test extra info: 1. MAC Loopback 0 2. MAC Loopback (diff. queues) 0 3. PHY Loopback 0 ... ELP side: ... 17:29:11.974973 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28 17:29:12.975199 ARP, Request who-has ELP tell 192.168.5.100, length 46 17:29:12.975217 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28 17:29:13.975022 ARP, Request who-has ELP tell 192.168.5.100, length 46 17:29:13.975035 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28 17:29:14.974837 ARP, Request who-has ELP tell 192.168.5.100, length 46 17:29:14.974849 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28 17:29:15.975026 ARP, Request who-has ELP tell 192.168.5.100, length 46 ... Accepted connection from 192.168.5.100, port 58932 [ 5] local 192.168.5.1 port 5201 connected to 192.168.5.100 port 58936 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 7.12 MBytes 59.7 Mbits/sec [ 5] 1.00-2.00 sec 8.50 MBytes 71.3 Mbits/sec [ 5] 2.00-3.00 sec 8.50 MBytes 71.3 Mbits/sec [ 5] 3.00-4.00 sec 8.38 MBytes 70.3 Mbits/sec [ 5] 4.00-5.00 sec 8.50 MBytes 71.3 Mbits/sec [ 5] 5.00-6.00 sec 8.38 MBytes 70.3 Mbits/sec [ 5] 6.00-7.00 sec 8.62 MBytes 72.4 Mbits/sec [ 5] 7.00-8.00 sec 8.62 MBytes 72.3 Mbits/sec [ 5] 8.00-9.00 sec 8.62 MBytes 72.4 Mbits/sec [ 5] 9.00-10.00 sec 8.62 MBytes 72.4 Mbits/sec [ 5] 10.00-10.12 sec 896 KBytes 62.3 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.12 sec 84.8 MBytes 70.3 Mbits/sec receiver DTS node example: ðernet_1g_tile { ... phy-mode = "rgmii-rxid"; phy-handle = <&phy1>; ... mdio: mdio { phy1: ethernet-phy@1 { ... compatible = "ethernet-phy-id0008.011b"; rx-internal-delay-ps = <1050>; ... }; }; }; -- Best regards, Artem Shimko ChangeLog: v3 --> v4 - Drop dapu,tx-inverted-clk (vendor-specific property removed) - Fix driver behavior in relation to rgmii modes - Apply software reset before RGMII register writes v2 --> v3 - Use phy_get_internal_delay() for delay validation and selection - Add poll timeout for reset using read_poll_timeout() v1 --> v2 - Drop debugfs interface - Simplify RGMII delay reading logic using of_property_read_u32() - Fix missing newline at end of dapu,dap8211r.yaml (yamllint error) - Simplify delay property description in DT binding - Rename tx-inverted-clk to dapu,tx-inverted-clk (vendor prefix) - Replace enum with multipleOf + maximum for delay validation - Fix compatible string and tx-internal-delay-ps value in example - Remove rounding logic, return -EINVAL for unsupported delay values - Respect DT delay properties for all RGMII modes - Add polling for self-clearing reset bit instead of fixed sleep - Remove unused packet generator macros (DAP8211R_PKGC5 and related) Artem Shimko (2): dt-bindings: net: add DAPU Telecom DAP8211R(I) PHY binding net: phy: add DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY driver .../bindings/net/dapu,dap8211r.yaml | 63 ++++++ drivers/net/phy/Kconfig | 10 + drivers/net/phy/Makefile | 1 + drivers/net/phy/dap8211r.c | 206 ++++++++++++++++++ 4 files changed, 280 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/dapu,dap8211r.yaml create mode 100644 drivers/net/phy/dap8211r.c -- 2.43.0