From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Lars-Peter Clausen <lars@metafoo.de>,
nuno.sa@analog.com, Shenghao Ding <shenghao-ding@ti.com>,
Kevin Lu <kevin-lu@ti.com>
Cc: Baojun Xu <baojun.xu@ti.com>, Sen Wang <sen@ti.com>,
Steven Eckhoff <steven.eckhoff.opensource@gmail.com>,
Srinivas Kandagatla <srini@kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Charles Keepax <ckeepax@opensource.cirrus.com>,
Linus Walleij <linusw@kernel.org>,
u.kleine-koenig@baylibre.com,
Thorsten Blum <thorsten.blum@linux.dev>,
Kees Cook <kees@kernel.org>, Chen Ni <nichen@iscas.ac.cn>,
Bartosz Golaszewski <brgl@kernel.org>,
Shengjiu Wang <shengjiu.wang@nxp.com>,
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>,
Pengpeng Hou <pengpeng@iscas.ac.cn>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
patches@opensource.cirrus.com, linux-kernel@vger.kernel.org,
linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH v2 07/26] ASoC: codecs: tlv320dac33: Use guard() for mutex & spin locks
Date: Mon, 27 Jul 2026 16:40:27 +0700 [thread overview]
Message-ID: <20260727094046.23001-8-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260727094046.23001-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/codecs/tlv320dac33.c | 87 ++++++++++++++--------------------
1 file changed, 36 insertions(+), 51 deletions(-)
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 223c49dfc450..9bd2ddd8dacd 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -7,6 +7,7 @@
* Copyright: (C) 2009 Nokia Corporation
*/
+#include <linux/cleanup.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
@@ -236,13 +237,10 @@ static int dac33_write_locked(struct snd_soc_component *component, unsigned int
unsigned int value)
{
struct tlv320dac33_priv *dac33 = snd_soc_component_get_drvdata(component);
- int ret;
- mutex_lock(&dac33->mutex);
- ret = dac33_write(component, reg, value);
- mutex_unlock(&dac33->mutex);
+ guard(mutex)(&dac33->mutex);
- return ret;
+ return dac33_write(component, reg, value);
}
#define DAC33_I2C_ADDR_AUTOINC 0x80
@@ -365,13 +363,13 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
struct tlv320dac33_priv *dac33 = snd_soc_component_get_drvdata(component);
int ret = 0;
- mutex_lock(&dac33->mutex);
+ guard(mutex)(&dac33->mutex);
/* Safety check */
if (unlikely(power == dac33->chip_power)) {
dev_dbg(component->dev, "Trying to set the same power state: %s\n",
power ? "ON" : "OFF");
- goto exit;
+ return ret;
}
if (power) {
@@ -380,7 +378,7 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
if (ret != 0) {
dev_err(component->dev,
"Failed to enable supplies: %d\n", ret);
- goto exit;
+ return ret;
}
if (dac33->reset_gpiod) {
@@ -388,7 +386,7 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
if (ret < 0) {
dev_err(&dac33->i2c->dev,
"Failed to set reset GPIO: %d\n", ret);
- goto exit;
+ return ret;
}
}
@@ -400,7 +398,7 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
if (ret < 0) {
dev_err(&dac33->i2c->dev,
"Failed to set reset GPIO: %d\n", ret);
- goto exit;
+ return ret;
}
}
@@ -409,14 +407,12 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
if (ret != 0) {
dev_err(component->dev,
"Failed to disable supplies: %d\n", ret);
- goto exit;
+ return ret;
}
dac33->chip_power = 0;
}
-exit:
- mutex_unlock(&dac33->mutex);
return ret;
}
@@ -659,7 +655,6 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
{
struct snd_soc_component *component = dac33->component;
unsigned int delay;
- unsigned long flags;
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
@@ -667,10 +662,10 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
DAC33_THRREG(dac33->nsample));
/* Take the timestamps */
- spin_lock_irqsave(&dac33->lock, flags);
- dac33->t_stamp2 = ktime_to_us(ktime_get());
- dac33->t_stamp1 = dac33->t_stamp2;
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock) {
+ dac33->t_stamp2 = ktime_to_us(ktime_get());
+ dac33->t_stamp1 = dac33->t_stamp2;
+ }
dac33_write16(component, DAC33_PREFILL_MSB,
DAC33_THRREG(dac33->alarm_threshold));
@@ -682,11 +677,11 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
break;
case DAC33_FIFO_MODE7:
/* Take the timestamp */
- spin_lock_irqsave(&dac33->lock, flags);
- dac33->t_stamp1 = ktime_to_us(ktime_get());
- /* Move back the timestamp with drain time */
- dac33->t_stamp1 -= dac33->mode7_us_to_lthr;
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock) {
+ dac33->t_stamp1 = ktime_to_us(ktime_get());
+ /* Move back the timestamp with drain time */
+ dac33->t_stamp1 -= dac33->mode7_us_to_lthr;
+ }
dac33_write16(component, DAC33_PREFILL_MSB,
DAC33_THRREG(DAC33_MODE7_MARGIN));
@@ -704,14 +699,12 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33)
{
struct snd_soc_component *component = dac33->component;
- unsigned long flags;
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
/* Take the timestamp */
- spin_lock_irqsave(&dac33->lock, flags);
- dac33->t_stamp2 = ktime_to_us(ktime_get());
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock)
+ dac33->t_stamp2 = ktime_to_us(ktime_get());
dac33_write16(component, DAC33_NSAMPLE_MSB,
DAC33_THRREG(dac33->nsample));
@@ -735,7 +728,7 @@ static void dac33_work(struct work_struct *work)
dac33 = container_of(work, struct tlv320dac33_priv, work);
component = dac33->component;
- mutex_lock(&dac33->mutex);
+ guard(mutex)(&dac33->mutex);
switch (dac33->state) {
case DAC33_PREFILL:
dac33->state = DAC33_PLAYBACK;
@@ -757,18 +750,15 @@ static void dac33_work(struct work_struct *work)
dac33_write(component, DAC33_FIFO_CTRL_A, reg);
break;
}
- mutex_unlock(&dac33->mutex);
}
static irqreturn_t dac33_interrupt_handler(int irq, void *dev)
{
struct snd_soc_component *component = dev;
struct tlv320dac33_priv *dac33 = snd_soc_component_get_drvdata(component);
- unsigned long flags;
- spin_lock_irqsave(&dac33->lock, flags);
- dac33->t_stamp1 = ktime_to_us(ktime_get());
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock)
+ dac33->t_stamp1 = ktime_to_us(ktime_get());
/* Do not schedule the workqueue in Mode7 */
if (dac33->fifo_mode != DAC33_FIFO_MODE7)
@@ -902,14 +892,13 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream,
return -EINVAL;
}
- mutex_lock(&dac33->mutex);
+ guard(mutex)(&dac33->mutex);
if (!dac33->chip_power) {
/*
* Chip is not powered yet.
* Do the init in the dac33_set_bias_level later.
*/
- mutex_unlock(&dac33->mutex);
return 0;
}
@@ -1053,8 +1042,6 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream,
break;
}
- mutex_unlock(&dac33->mutex);
-
return 0;
}
@@ -1156,21 +1143,20 @@ static snd_pcm_sframes_t dac33_dai_delay(
unsigned int time_delta, uthr;
int samples_out, samples_in, samples;
snd_pcm_sframes_t delay = 0;
- unsigned long flags;
switch (dac33->fifo_mode) {
case DAC33_FIFO_BYPASS:
break;
case DAC33_FIFO_MODE1:
- spin_lock_irqsave(&dac33->lock, flags);
- t0 = dac33->t_stamp1;
- t1 = dac33->t_stamp2;
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock) {
+ t0 = dac33->t_stamp1;
+ t1 = dac33->t_stamp2;
+ }
t_now = ktime_to_us(ktime_get());
/* We have not started to fill the FIFO yet, delay is 0 */
if (!t1)
- goto out;
+ return 0;
if (t0 > t1) {
/*
@@ -1230,23 +1216,22 @@ static snd_pcm_sframes_t dac33_dai_delay(
}
break;
case DAC33_FIFO_MODE7:
- spin_lock_irqsave(&dac33->lock, flags);
- t0 = dac33->t_stamp1;
- uthr = dac33->uthr;
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock) {
+ t0 = dac33->t_stamp1;
+ uthr = dac33->uthr;
+ }
t_now = ktime_to_us(ktime_get());
/* We have not started to fill the FIFO yet, delay is 0 */
if (!t0)
- goto out;
+ return 0;
if (t_now <= t0) {
/*
* Either the timestamps are messed or equal. Report
* maximum delay
*/
- delay = uthr;
- goto out;
+ return uthr;
}
time_delta = t_now - t0;
@@ -1287,7 +1272,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
dac33->fifo_mode);
break;
}
-out:
+
return delay;
}
--
2.43.0
next prev parent reply other threads:[~2026-07-27 9:43 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-27 9:40 [PATCH v2 00/26] ASoC: codecs: Use guard() for mutex & spin locks - part 3 phucduc.bui
2026-07-27 9:40 ` [PATCH v2 01/26] ASoC: codecs: sigmadsp: Use guard() for mutex locks phucduc.bui
2026-07-27 9:40 ` [PATCH v2 02/26] ASoC: codecs: sta350: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 03/26] ASoC: codecs: sta32x: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 04/26] ASoC: codecs: tas2781: " phucduc.bui
2026-07-27 11:06 ` Cezary Rojewski
2026-07-27 9:40 ` [PATCH v2 05/26] ASoC: codecs: tas2783: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 06/26] ASoC: codecs: tas5805m: " phucduc.bui
2026-07-27 9:40 ` phucduc.bui [this message]
2026-07-27 9:40 ` [PATCH v2 08/26] ASoC: codecs: tscs42xx: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 09/26] ASoC: codecs: tscs454: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 10/26] ASoC: codecs: twl6040: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 11/26] ASoC: codecs: wcd-mbhc: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 12/26] ASoC: codecs: wcd934x: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 13/26] ASoC: codecs: wcd937x: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 14/26] ASoC: codecs: wcd938x: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 15/26] ASoC: codecs: wcd939x: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 16/26] ASoC: codecs: wm0010: Use guard() for mutex & spin locks phucduc.bui
2026-07-27 9:40 ` [PATCH v2 17/26] ASoC: codecs: wm2000: Use guard() for mutex locks phucduc.bui
2026-07-27 9:40 ` [PATCH v2 18/26] ASoC: codecs: wm5102: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 19/26] ASoC: codecs: wm8731: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 20/26] ASoC: codecs: wm8903: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 21/26] ASoC: codecs: wm8958: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 22/26] ASoC: codecs: wm8962: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 23/26] ASoC: codecs: wm8994: " phucduc.bui
2026-07-27 9:40 ` [PATCH v2 24/26] ASoC: codecs: wm971x: " phucduc.bui
2026-07-27 9:50 ` Richard Fitzgerald
2026-07-27 9:40 ` [PATCH v2 25/26] ASoC: codecs: wm_adsp: " phucduc.bui
2026-07-27 9:53 ` Richard Fitzgerald
2026-07-27 9:40 ` [PATCH v2 26/26] ASoC: codecs: wsa88xx: " phucduc.bui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260727094046.23001-8-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=baojun.xu@ti.com \
--cc=brgl@kernel.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=kees@kernel.org \
--cc=kevin-lu@ti.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linusw@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=nichen@iscas.ac.cn \
--cc=nuno.sa@analog.com \
--cc=patches@opensource.cirrus.com \
--cc=pengpeng@iscas.ac.cn \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=sebastian.krzyszkowiak@puri.sm \
--cc=sen@ti.com \
--cc=shenghao-ding@ti.com \
--cc=shengjiu.wang@nxp.com \
--cc=srini@kernel.org \
--cc=steven.eckhoff.opensource@gmail.com \
--cc=thorsten.blum@linux.dev \
--cc=tiwai@suse.com \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.