All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: linux-rtc@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	linux-stm32@st-md-mailman.stormreply.com (moderated
	list:ARM/STM32 ARCHITECTURE),
	linux-arm-kernel@lists.infradead.org (moderated list:ARM/STM32
	ARCHITECTURE), linux-kernel@vger.kernel.org (open list)
Subject: [PATCHv2] rtc: stmp3xxx: use devm_platform_ioremap_resource()
Date: Mon, 27 Jul 2026 17:53:03 -0700	[thread overview]
Message-ID: <20260728005303.574936-1-rosenp@gmail.com> (raw)

Replace the open-coded platform_get_resource() plus devm_ioremap()
sequence with a single devm_platform_ioremap_resource() call, which folds
the resource lookup and mapping into one step and returns an ERR_PTR on
failure, checked with IS_ERR() and propagated via PTR_ERR().

Move the mapping ahead of the devm_kzalloc() so that an error or deferred
probe is handled before the rtc_data allocation, avoiding needless work.

The fsl,stmp3xxx-rtc nodes in imx23.dtsi (reg = <0x8005c000 0x2000>) and
imx28.dtsi (reg = <0x80056000 0x2000>) each provide a single
non-overlapping IORESOURCE_MEM window, so the region reservation now
performed by devm_platform_ioremap_resource() introduces no conflict.

Remove irq_alarm from private struct. It's only used in _probe. Also add
check for platform_get_irq() errors.

Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 v2: add platform_get_irq error check
 drivers/rtc/rtc-stmp3xxx.c | 32 ++++++++++++--------------------
 1 file changed, 12 insertions(+), 20 deletions(-)

diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index 7afcd14aeee5..e789458ba96a 100644
--- a/drivers/rtc/rtc-stmp3xxx.c
+++ b/drivers/rtc/rtc-stmp3xxx.c
@@ -56,7 +56,6 @@
 struct stmp3xxx_rtc_data {
 	struct rtc_device *rtc;
 	void __iomem *io;
-	int irq_alarm;
 };
 
 #if IS_ENABLED(CONFIG_STMP3XXX_RTC_WATCHDOG)
@@ -245,29 +244,25 @@ static void stmp3xxx_rtc_remove(struct platform_device *pdev)
 static int stmp3xxx_rtc_probe(struct platform_device *pdev)
 {
 	struct stmp3xxx_rtc_data *rtc_data;
-	struct resource *r;
+	void __iomem *io;
 	u32 rtc_stat;
 	u32 pers0_set, pers0_clr;
 	u32 crystalfreq = 0;
 	int err;
 
+	irq_alarm = platform_get_irq(pdev, 0);
+	if (irq_alarm < 0)
+		return irq_alarm;
+
+	io = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(io))
+		return PTR_ERR(io);
+
 	rtc_data = devm_kzalloc(&pdev->dev, sizeof(*rtc_data), GFP_KERNEL);
 	if (!rtc_data)
 		return -ENOMEM;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		dev_err(&pdev->dev, "failed to get resource\n");
-		return -ENXIO;
-	}
-
-	rtc_data->io = devm_ioremap(&pdev->dev, r->start, resource_size(r));
-	if (!rtc_data->io) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		return -EIO;
-	}
-
-	rtc_data->irq_alarm = platform_get_irq(pdev, 0);
+	rtc_data->io = io;
 
 	rtc_stat = readl(rtc_data->io + STMP3XXX_RTC_STAT);
 	if (!(rtc_stat & STMP3XXX_RTC_STAT_RTC_PRESENT)) {
@@ -354,13 +349,10 @@ static int stmp3xxx_rtc_probe(struct platform_device *pdev)
 	if (IS_ERR(rtc_data->rtc))
 		return PTR_ERR(rtc_data->rtc);
 
-	err = devm_request_irq(&pdev->dev, rtc_data->irq_alarm,
+	err = devm_request_irq(&pdev->dev, irq_alarm,
 			stmp3xxx_rtc_interrupt, 0, "RTC alarm", &pdev->dev);
-	if (err) {
-		dev_err(&pdev->dev, "Cannot claim IRQ%d\n",
-			rtc_data->irq_alarm);
+	if (err)
 		return err;
-	}
 
 	rtc_data->rtc->ops = &stmp3xxx_rtc_ops;
 	rtc_data->rtc->range_max = U32_MAX;
-- 
2.55.0



             reply	other threads:[~2026-07-28  0:53 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-28  0:53 Rosen Penev [this message]
2026-07-28  1:04 ` [PATCHv2] rtc: stmp3xxx: use devm_platform_ioremap_resource() sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260728005303.574936-1-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.