From: Davidlohr Bueso <dave@stgolabs.net>
To: dave.jiang@intel.com
Cc: jic23@kernel.org, alison.schofield@intel.com, icheng@nvidia.com,
benjamin.cheatham@amd.com, alucerop@amd.com,
dongjoo.seo1@samsung.com, dave@stgolabs.net,
linux-cxl@vger.kernel.org
Subject: [PATCH v7 8/8] cxl: Allow auto-committed BI hdm decoders
Date: Tue, 28 Jul 2026 07:41:36 -0700 [thread overview]
Message-ID: <20260728144136.709882-9-dave@stgolabs.net> (raw)
In-Reply-To: <20260728144136.709882-1-dave@stgolabs.net>
Allow auto-committed BI hdm decoders on sane platforms, rejecting
only broken paths (ie: one that cannot route BISnp, or BI paired
with a host-only target range type).
The respective region creation is done like any other committed
decoder - with cxlds->bi set by the time an decoder attaches.
A committed BI decoder under a window without the BI restriction is
refused (undefined behavior per the CFMWS Window Restrictions), as
is a committed decoder attaching to a region of a different
coherency model.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
---
drivers/cxl/core/hdm.c | 24 +++++++++++++++++-------
drivers/cxl/core/pci.c | 36 +++++++++++++++++++++++++++++-------
drivers/cxl/core/region.c | 33 +++++++++++++++++++++++++++++++++
drivers/cxl/port.c | 4 ++++
4 files changed, 83 insertions(+), 14 deletions(-)
diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index f437fe15c6df..c5be6fe4c77a 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -1061,13 +1061,23 @@ static int init_hdm_decoder(struct cxl_port *port, struct cxl_decoder *cxld,
else
cxld->target_type = CXL_DECODER_DEVMEM;
- /*
- * Autocommit BI-enabled decoders is not supported.
- * At this point cxlds->bi is not yet setup, so there
- * are no guarantees that the platform supports BI.
- */
- if (FIELD_GET(CXL_HDM_DECODER0_CTRL_BI, ctrl))
- return -ENXIO;
+ if (FIELD_GET(CXL_HDM_DECODER0_CTRL_BI, ctrl)) {
+ struct cxl_dev_state *cxlds = cxled ?
+ cxled_to_memdev(cxled)->cxlds : NULL;
+
+ if (cxld->target_type == CXL_DECODER_HOSTONLYMEM) {
+ dev_warn(&port->dev,
+ "decoder%d.%d: BI with host-only\n",
+ port->id, cxld->id);
+ return -ENXIO;
+ }
+ if (cxlds && !cxlds->bi_capable) {
+ dev_warn(&port->dev,
+ "decoder%d.%d: path not BI capable\n",
+ port->id, cxld->id);
+ return -ENXIO;
+ }
+ }
guard(rwsem_write)(&cxl_rwsem.region);
if (cxld->id != cxl_num_decoders_committed(port)) {
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 554058ccb1e9..8d2651e06a79 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -1083,6 +1083,18 @@ static int __cxl_bi_commit_decoder(struct device *dev, void __iomem *bi)
scale, base);
}
+/* Committed, or no explicit commit required */
+static bool cxl_bi_decoder_committed(void __iomem *bi)
+{
+ u32 caps = readl(bi + CXL_BI_DECODER_CAPS_OFFSET);
+ u32 sts = readl(bi + CXL_BI_DECODER_STATUS_OFFSET);
+
+ if (!FIELD_GET(CXL_BI_DECODER_CAPS_EXPLICIT_COMMIT_REQ, caps))
+ return true;
+
+ return FIELD_GET(CXL_BI_DECODER_STATUS_BI_COMMITTED, sts);
+}
+
/* Enable or dealloc BI-ID changes in the given level of the topology. */
static int __cxl_bi_ctrl_dport(struct cxl_dport *dport, bool enable)
{
@@ -1127,6 +1139,16 @@ static int __cxl_bi_ctrl_dport(struct cxl_dport *dport, bool enable)
return 0;
case PCI_EXP_TYPE_DOWNSTREAM:
if (enable) {
+ /*
+ * Adopt a dport that was already programmed and
+ * committed by firmware: nothing new is enabled
+ * below it, so no commit is due.
+ */
+ if (FIELD_GET(CXL_BI_DECODER_CTRL_BI_ENABLE, ctrl) &&
+ !FIELD_GET(CXL_BI_DECODER_CTRL_BI_FW, ctrl) &&
+ cxl_bi_decoder_committed(bi))
+ return 0;
+
value = ctrl & ~CXL_BI_DECODER_CTRL_BI_FW;
value |= CXL_BI_DECODER_CTRL_BI_ENABLE;
} else {
@@ -1173,11 +1195,11 @@ static int __cxl_bi_ctrl_endpoint(struct cxl_dev_state *cxlds, bool enable)
if (enable) {
if (FIELD_GET(CXL_BI_DECODER_CTRL_BI_ENABLE, ctrl)) {
- if (cxlds->bi)
- return 0;
- dev_err(cxlds->dev,
- "BI already enabled in hardware\n");
- return -EBUSY;
+ /* adopt firmware enabled */
+ if (!cxlds->bi)
+ dev_dbg(cxlds->dev,
+ "adopting firmware-enabled BI\n");
+ goto done;
}
val = ctrl | CXL_BI_DECODER_CTRL_BI_ENABLE;
} else {
@@ -1192,11 +1214,11 @@ static int __cxl_bi_ctrl_endpoint(struct cxl_dev_state *cxlds, bool enable)
}
writel(val, bi + CXL_BI_DECODER_CTRL_OFFSET);
- cxlds->bi = enable;
dev_dbg(cxlds->dev, "BI requests %s\n",
str_enabled_disabled(enable));
-
+done:
+ cxlds->bi = enable;
return 0;
}
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index 76c6dc28a407..5578ef68034d 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -1827,6 +1827,21 @@ static int cxl_region_attach_position(struct cxl_region *cxlr,
return rc;
}
+/* Read back the committed BI bit of an auto-discovered decoder */
+static bool cxled_committed_bi(struct cxl_endpoint_decoder *cxled)
+{
+ struct cxl_port *port = cxled_to_port(cxled);
+ struct cxl_hdm *cxlhdm = dev_get_drvdata(&port->dev);
+ u32 ctrl;
+
+ if (!cxlhdm || !cxlhdm->regs.hdm_decoder)
+ return false;
+
+ ctrl = readl(cxlhdm->regs.hdm_decoder +
+ CXL_HDM_DECODER0_CTRL_OFFSET(cxled->cxld.id));
+ return FIELD_GET(CXL_HDM_DECODER0_CTRL_BI, ctrl);
+}
+
static int cxl_region_attach_auto(struct cxl_region *cxlr,
struct cxl_endpoint_decoder *cxled, int pos)
{
@@ -1839,6 +1854,16 @@ static int cxl_region_attach_auto(struct cxl_region *cxlr,
return -EINVAL;
}
+ /* A committed decoder may only join a region of its own flavor */
+ if (cxled_committed_bi(cxled) !=
+ (cxlr->type == CXL_DECODER_DEVMEM &&
+ cxl_root_decoder_is_bi(cxlr->cxlrd))) {
+ dev_err(&cxlr->dev, "%s:%s coherency model mismatch\n",
+ dev_name(&cxled_to_memdev(cxled)->dev),
+ dev_name(&cxled->cxld.dev));
+ return -ENXIO;
+ }
+
if (pos >= 0) {
dev_dbg(&cxlr->dev, "%s: expected auto position, not %d\n",
dev_name(&cxled->cxld.dev), pos);
@@ -3806,6 +3831,14 @@ static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd,
if (part < 0)
return ERR_PTR(-EBUSY);
+ /* avoid UB */
+ if (cxled_committed_bi(cxled) && !cxl_root_decoder_is_bi(cxlrd)) {
+ dev_err(cxlmd->dev.parent,
+ "%s:%s BI decoder in a non-BI window\n",
+ dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev));
+ return ERR_PTR(-ENXIO);
+ }
+
do {
cxlr = __create_region(cxlrd, cxlds->part[part].mode,
atomic_read(&cxlrd->region_id),
diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c
index ab3317fc1388..0c666ce00aa2 100644
--- a/drivers/cxl/port.c
+++ b/drivers/cxl/port.c
@@ -181,6 +181,10 @@ static int cxl_endpoint_port_probe(struct cxl_port *port)
if (rc)
return rc;
+ /*
+ * Must precede region discovery so that any firmware-committed BI
+ * decoder is adopted before its region is assembled.
+ */
rc = cxl_bi_setup(port);
if (rc)
dev_dbg(&port->dev, "BI setup failed rc=%d\n", rc);
--
2.39.5
next prev parent reply other threads:[~2026-07-28 14:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-28 14:41 [PATCH v7 0/8] cxl: Support Back-Invalidate Davidlohr Bueso
2026-07-28 14:41 ` [PATCH v7 1/8] cxl: Add BI register probing and port initialization Davidlohr Bueso
2026-07-28 14:41 ` [PATCH v7 2/8] cxl/pci: Add BI topology enable/disable Davidlohr Bueso
2026-07-28 15:16 ` sashiko-bot
2026-07-28 14:41 ` [PATCH v7 3/8] cxl/hdm: Add BI coherency support for endpoint decoders Davidlohr Bueso
2026-07-28 15:26 ` sashiko-bot
2026-07-28 18:44 ` Davidlohr Bueso
2026-07-28 14:41 ` [PATCH v7 4/8] cxl: Add HDM-DB region creation Davidlohr Bueso
2026-07-28 14:41 ` [PATCH v7 5/8] cxl/hdm: Rename decoder coherency flags Davidlohr Bueso
2026-07-28 14:41 ` [PATCH v7 6/8] cxl/region: Log the coherency model at region creation Davidlohr Bueso
2026-07-28 14:41 ` [PATCH v7 7/8] cxl/pci: Split BI capability probe from setup Davidlohr Bueso
2026-07-28 14:41 ` Davidlohr Bueso [this message]
2026-07-28 15:46 ` [PATCH v7 8/8] cxl: Allow auto-committed BI hdm decoders sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260728144136.709882-9-dave@stgolabs.net \
--to=dave@stgolabs.net \
--cc=alison.schofield@intel.com \
--cc=alucerop@amd.com \
--cc=benjamin.cheatham@amd.com \
--cc=dave.jiang@intel.com \
--cc=dongjoo.seo1@samsung.com \
--cc=icheng@nvidia.com \
--cc=jic23@kernel.org \
--cc=linux-cxl@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.