From: <gregkh@linuxfoundation.org>
To: coiaprant@gmail.com,jiawenwu@trustnetic.com,kuba@kernel.org,maxime.chevallier@bootlin.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] net: pcs: xpcs: fix SGMII state reading" failed to apply to 6.12-stable tree
Date: Wed, 29 Jul 2026 15:53:04 +0200 [thread overview]
Message-ID: <2026072904-shallow-icing-2a9f@gregkh> (raw)
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x def9a4745e105145133e442dd8a1c126caf0f553
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026072904-shallow-icing-2a9f@gregkh' --subject-prefix 'PATCH 6.12.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From def9a4745e105145133e442dd8a1c126caf0f553 Mon Sep 17 00:00:00 2001
From: Coia Prant <coiaprant@gmail.com>
Date: Fri, 17 Jul 2026 15:43:25 +0800
Subject: [PATCH] net: pcs: xpcs: fix SGMII state reading
Commit 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
added a path in xpcs_get_state_c37_sgmii() that reads speed/duplex from
BMCR after AN completes. However, BMCR does not reflect the negotiated
result on the hardware where this has been tested:
- On RK3568 (MAC side SGMII), BMCR returns a fixed hardware reset value
- Wangxun engineer Jiawen Wu confirmed that on their side, "BMCR looks
like it only wants to be return as 0" [0]
The correct information is available in CL37_ANSGM_STS, which contains
the actual link status and negotiated speed/duplex.
This bug was previously masked by phylink core, which overrides the PCS
link state with the PHY state when a PHY is present:
/* If we have a phy, the "up" state is the union of both the
* PHY and the MAC
*/
if (phy)
link_state.link &= pl->phy_state.link;
Thus, when the link is down, the PHY's link_down state is applied on top
of whatever the PCS reports, hiding the broken PCS state reading path.
Modify xpcs_get_state_c37_sgmii() to:
1. Read link state from CL37_ANSGM_STS
2. If link is up, report speed/duplex from CL37_ANSGM_STS
3. Remove the broken BMCR reading path entirely
Also properly set state->an_complete to reflect the AN completion status,
and clear CL37_ANCMPLT_INTR when link is down to avoid stale state.
[0] https://lore.kernel.org/all/000c01dd1593$2ac0b0f0$804212d0$@trustnetic.com/
Fixes: 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
Cc: stable@vger.kernel.org
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260717074324.3250043-2-coiaprant@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index e69fa2f0a0e8..0337e2bcc012 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -1058,6 +1058,7 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
/* Reset link_state */
state->link = false;
+ state->an_complete = false;
state->speed = SPEED_UNKNOWN;
state->duplex = DUPLEX_UNKNOWN;
state->pause = 0;
@@ -1069,6 +1070,8 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
if (ret < 0)
return ret;
+ state->an_complete = ret & DW_VR_MII_AN_STS_C37_ANCMPLT_INTR;
+
if (ret & DW_VR_MII_C37_ANSGM_SP_LNKSTS) {
int speed_value;
@@ -1086,35 +1089,14 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
state->duplex = DUPLEX_FULL;
else
state->duplex = DUPLEX_HALF;
- } else if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
- int speed, duplex;
- state->link = true;
-
- speed = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_BMCR);
- if (speed < 0)
- return speed;
-
- speed &= BMCR_SPEED100 | BMCR_SPEED1000;
- if (speed == BMCR_SPEED1000)
- state->speed = SPEED_1000;
- else if (speed == BMCR_SPEED100)
- state->speed = SPEED_100;
- else if (speed == 0)
- state->speed = SPEED_10;
-
- duplex = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_ADVERTISE);
- if (duplex < 0)
- return duplex;
-
- if (duplex & ADVERTISE_1000XFULL)
- state->duplex = DUPLEX_FULL;
- else if (duplex & ADVERTISE_1000XHALF)
- state->duplex = DUPLEX_HALF;
-
- xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+ return 0;
}
+ /* Clear AN complete status or interrupt */
+ if (state->an_complete)
+ xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+
return 0;
}
next reply other threads:[~2026-07-29 13:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 13:53 gregkh [this message]
2026-07-29 19:14 ` [PATCH 6.12.y] net: pcs: xpcs: fix SGMII state reading Coia Prant
2026-07-30 2:40 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026072904-shallow-icing-2a9f@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=coiaprant@gmail.com \
--cc=jiawenwu@trustnetic.com \
--cc=kuba@kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.