[PATCH 03/14] nvmem: check the return value of gpiod_set_value_cansleep()

[srini@kernel.org]

From: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

GPIO setters now return integer values and can indicate failures in
lower abstraction layers. Check the return values of
gpiod_set_value_cansleep() calls in nvmem core.

Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
---
 drivers/nvmem/core.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index ea17374209ba..a7e58bceb7ab 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -64,16 +64,22 @@ static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
 static int __nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
 			     void *val, size_t bytes)
 {
-	int ret;
+	int ret, wr_ok;
 
 	if (!nvmem->reg_write)
 		return -EOPNOTSUPP;
 
-	gpiod_set_value_cansleep(nvmem->wp_gpio, 0);
-	ret = nvmem->reg_write(nvmem->priv, offset, val, bytes);
-	gpiod_set_value_cansleep(nvmem->wp_gpio, 1);
+	ret = gpiod_set_value_cansleep(nvmem->wp_gpio, 0);
+	if (ret)
+		return ret;
 
-	return ret;
+	wr_ok = nvmem->reg_write(nvmem->priv, offset, val, bytes);
+
+	ret = gpiod_set_value_cansleep(nvmem->wp_gpio, 1);
+	if (ret)
+		return ret;
+
+	return wr_ok;
 }
 
 static int nvmem_access_with_keepouts(struct nvmem_device *nvmem,
-- 
2.53.0