All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net, Andrew Lunn <andrew@lunn.ch>,
	Jakub Kicinski <kuba@kernel.org>,
	Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>,
	Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	thomas.petazzoni@bootlin.com,
	"Christophe Leroy" <christophe.leroy@csgroup.eu>,
	"Herve Codina" <herve.codina@bootlin.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>,
	"Köry Maincent" <kory.maincent@bootlin.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Oleksij Rempel" <o.rempel@pengutronix.de>,
	"Nicolò Veronese" <nicveronese@gmail.com>,
	"Simon Horman" <horms@kernel.org>,
	mwojtas@chromium.org,
	"Romain Gantois" <romain.gantois@bootlin.com>,
	"Daniel Golle" <daniel@makrotopia.org>,
	"Dimitri Fedrau" <dimitri.fedrau@liebherr.com>,
	"Frank Wunderlich" <frank.wunderlich@linux.dev>,
	"Pietro Ameruoso" <p.ameruoso@live.it>
Subject: [PATCH net-next v15 05/10] net: phy: Represent PHY-less SFP modules with phy_port
Date: Sat,  1 Aug 2026 09:43:26 +0200	[thread overview]
Message-ID: <20260801074332.98755-6-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20260801074332.98755-1-maxime.chevallier@bootlin.com>

Now that the SFP bus infrastructure notifies when PHY-less modules are
connected, we can create a phy_port to represent it. Instead of letting
the SFP subsystem handle that, the Bus' upstream is in charge of
maintaining that phy_port and register it to the topology, as the
upstream (in this case a phy device) is directly interacting with the
underlying net_device.

Add a phy_caps helper to get the achievable modes on this module based
on what the phy_port representing the bus supports.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/phy/phy-caps.h   |   2 +
 drivers/net/phy/phy_caps.c   |  26 +++++++++
 drivers/net/phy/phy_device.c | 101 +++++++++++++++++++++++++++++++++--
 drivers/net/phy/phylink.c    |  76 ++++++++++++++++++++++++--
 include/linux/phy.h          |   6 +++
 5 files changed, 204 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/phy-caps.h b/drivers/net/phy/phy-caps.h
index 421088e6f6e8..ec3d39a0ae06 100644
--- a/drivers/net/phy/phy-caps.h
+++ b/drivers/net/phy/phy-caps.h
@@ -66,5 +66,7 @@ void phy_caps_medium_get_supported(unsigned long *supported,
 				   enum ethtool_link_medium medium,
 				   int lanes);
 u32 phy_caps_mediums_from_linkmodes(unsigned long *linkmodes);
+void phy_caps_linkmode_filter_ifaces(unsigned long *to, const unsigned long *from,
+				     const unsigned long *interfaces);
 
 #endif /* __PHY_CAPS_H */
diff --git a/drivers/net/phy/phy_caps.c b/drivers/net/phy/phy_caps.c
index 942d43191561..558e4df4d63c 100644
--- a/drivers/net/phy/phy_caps.c
+++ b/drivers/net/phy/phy_caps.c
@@ -445,3 +445,29 @@ u32 phy_caps_mediums_from_linkmodes(unsigned long *linkmodes)
 	return mediums;
 }
 EXPORT_SYMBOL_GPL(phy_caps_mediums_from_linkmodes);
+
+/**
+ * phy_caps_linkmode_filter_ifaces() - Filter linkmodes with an interface list
+ * @to: Stores the filtered linkmodes
+ * @from: Linkmodes to filter
+ * @interfaces: Bitfield of phy_interface_t that we use for filtering
+ *
+ * Filter the provided linkmodes, only to keep the ones we can possibly achieve
+ * when using any of the provided MII interfaces.
+ */
+void phy_caps_linkmode_filter_ifaces(unsigned long *to,
+				     const unsigned long *from,
+				     const unsigned long *interfaces)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(ifaces_supported) = {};
+	unsigned int ifaces_caps = 0;
+	phy_interface_t interface;
+
+	for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX)
+		ifaces_caps |= phy_caps_from_interface(interface);
+
+	phy_caps_linkmodes(ifaces_caps, ifaces_supported);
+
+	linkmode_and(to, from, ifaces_supported);
+}
+EXPORT_SYMBOL_GPL(phy_caps_linkmode_filter_ifaces);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 28974dc76abe..b17e924b8d67 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1490,11 +1490,21 @@ static int phy_sfp_connect_phy(void *upstream, struct phy_device *phy)
 {
 	struct phy_device *phydev = upstream;
 	struct net_device *dev = phydev->attached_dev;
+	int ret;
 
-	if (dev)
-		return phy_link_topo_add_phy(dev, phy, PHY_UPSTREAM_PHY, phydev);
+	phydev->has_sfp_mod_phy = true;
 
-	return 0;
+	/* If we aren't attached to a netdev, we can't add the SFP PHY to its
+	 * topology.
+	 */
+	if (!dev)
+		return 0;
+
+	ret = phy_link_topo_add_phy(dev, phy, PHY_UPSTREAM_PHY, phydev);
+	if (ret)
+		phydev->has_sfp_mod_phy = false;
+
+	return ret;
 }
 
 /**
@@ -1512,6 +1522,8 @@ static void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy)
 	struct phy_device *phydev = upstream;
 	struct net_device *dev = phydev->attached_dev;
 
+	phydev->has_sfp_mod_phy = false;
+
 	if (dev)
 		phy_link_topo_del_phy(dev, phy);
 }
@@ -1617,6 +1629,75 @@ static void phy_sfp_link_down(void *upstream)
 		port->ops->link_down(port);
 }
 
+static int phy_add_sfp_mod_port(struct phy_device *phydev)
+{
+	const struct sfp_module_caps *caps;
+	struct phy_port *port;
+	int ret = 0;
+
+	/* Create mod port */
+	port = phy_port_alloc();
+	if (!port)
+		return -ENOMEM;
+
+	port->active = true;
+
+	caps = sfp_get_module_caps(phydev->sfp_bus);
+
+	phy_caps_linkmode_filter_ifaces(port->supported, caps->link_modes,
+					phydev->sfp_cage_port->interfaces);
+
+	if (phydev->attached_dev) {
+		ret = phy_link_topo_add_port(phydev->attached_dev, port);
+		if (ret) {
+			phy_port_destroy(port);
+			return ret;
+		}
+	}
+
+	/* we don't use phy_add_port() here as the module port isn't a direct
+	 * interface from the PHY, but rather an extension to the sfp-bus, that
+	 * is already represented by its own phy_port
+	 */
+	phydev->mod_port = port;
+
+	return 0;
+}
+
+static void phy_del_sfp_mod_port(struct phy_device *phydev)
+{
+	if (!phydev->mod_port)
+		return;
+
+	if (phydev->attached_dev)
+		phy_link_topo_del_port(phydev->attached_dev, phydev->mod_port);
+
+	phy_port_destroy(phydev->mod_port);
+	phydev->mod_port = NULL;
+}
+
+static int phy_sfp_module_start(void *upstream)
+{
+	struct phy_device *phydev = upstream;
+
+	/* If there's a downstream SFP module, and it doesn't contain a PHY
+	 * device, let's create a phy_port to represent that module.
+	 */
+	if (!phydev->has_sfp_mod_phy)
+		return phy_add_sfp_mod_port(phydev);
+
+	return 0;
+}
+
+static void phy_sfp_module_stop(void *upstream)
+{
+	struct phy_device *phydev = upstream;
+
+	/* Called upon module removal or upstream removal */
+	if (!phydev->has_sfp_mod_phy)
+		phy_del_sfp_mod_port(phydev);
+}
+
 static const struct sfp_upstream_ops sfp_phydev_ops = {
 	.attach = phy_sfp_attach,
 	.detach = phy_sfp_detach,
@@ -1626,6 +1707,8 @@ static const struct sfp_upstream_ops sfp_phydev_ops = {
 	.link_down = phy_sfp_link_down,
 	.connect_phy = phy_sfp_connect_phy,
 	.disconnect_phy = phy_sfp_disconnect_phy,
+	.module_start = phy_sfp_module_start,
+	.module_stop = phy_sfp_module_stop,
 };
 
 static int phy_add_port(struct phy_device *phydev, struct phy_port *port)
@@ -1725,6 +1808,7 @@ static int phy_sfp_probe(struct phy_device *phydev)
 		port = phy_setup_sfp_port(phydev);
 		if (IS_ERR(port)) {
 			ret = PTR_ERR(port);
+			port = NULL;
 			goto out_sfp;
 		}
 	}
@@ -1738,6 +1822,8 @@ static int phy_sfp_probe(struct phy_device *phydev)
 	 */
 	sfp_bus_put(bus);
 
+	phydev->sfp_cage_port = port;
+
 	return ret;
 
 out_port:
@@ -1838,6 +1924,12 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 		err = phy_link_topo_add_phy(dev, phydev, PHY_UPSTREAM_MAC, dev);
 		if (err)
 			goto error;
+
+		if (phydev->mod_port) {
+			err = phy_link_topo_add_port(dev, phydev->mod_port);
+			if (err)
+				goto error;
+		}
 	}
 
 	/* Some Ethernet drivers try to connect to a PHY device before
@@ -1974,6 +2066,8 @@ void phy_detach(struct phy_device *phydev)
 		phydev->attached_dev->phydev = NULL;
 		phydev->attached_dev = NULL;
 		phy_link_topo_del_phy(dev, phydev);
+		if (phydev->mod_port)
+			phy_link_topo_del_port(dev, phydev->mod_port);
 	}
 
 	phydev->phy_link_change = NULL;
@@ -3865,6 +3959,7 @@ static int phy_remove(struct device *dev)
 
 	sfp_bus_del_upstream(phydev->sfp_bus);
 	phydev->sfp_bus = NULL;
+	phydev->sfp_cage_port = NULL;
 
 	phy_cleanup_ports(phydev);
 
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 01b7e179799d..08203683c6e5 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -96,6 +96,7 @@ struct phylink {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
 	u8 sfp_port;
 	struct phy_port *sfp_cage_port;
+	struct phy_port *mod_port;
 
 	struct eee_config eee_cfg;
 
@@ -1789,10 +1790,15 @@ static int phylink_create_sfp_cage_port(struct phylink *pl)
 
 	ret = phy_link_topo_add_port(pl->netdev, port);
 	if (ret)
-		phy_port_destroy(port);
-	else
-		pl->sfp_cage_port = port;
+		goto out_destroy_port;
+
+	pl->sfp_cage_port = port;
+
+	return 0;
 
+out_destroy_port:
+	phy_port_destroy(port);
+	pl->sfp_cage_port = NULL;
 	return ret;
 }
 
@@ -3924,14 +3930,65 @@ static void phylink_sfp_module_remove(void *upstream)
 	phy_interface_zero(pl->sfp_interfaces);
 }
 
+static int phylink_add_sfp_mod_port(struct phylink *pl)
+{
+	const struct sfp_module_caps *caps;
+	struct phy_port *port;
+	int ret = 0;
+
+	if (!pl->sfp_cage_port)
+		return 0;
+
+	/* Create mod port */
+	port = phy_port_alloc();
+	if (!port)
+		return -ENOMEM;
+
+	port->active = true;
+
+	caps = sfp_get_module_caps(pl->sfp_bus);
+
+	phy_caps_linkmode_filter_ifaces(port->supported, caps->link_modes,
+					pl->sfp_cage_port->interfaces);
+
+	if (pl->netdev) {
+		ret = phy_link_topo_add_port(pl->netdev, port);
+		if (ret) {
+			phy_port_destroy(port);
+			return ret;
+		}
+	}
+
+	pl->mod_port = port;
+
+	return 0;
+}
+
+static void phylink_del_sfp_mod_port(struct phylink *pl)
+{
+	if (!pl->mod_port)
+		return;
+
+	if (pl->netdev)
+		phy_link_topo_del_port(pl->netdev, pl->mod_port);
+
+	phy_port_destroy(pl->mod_port);
+	pl->mod_port = NULL;
+}
+
 static int phylink_sfp_module_start(void *upstream)
 {
 	struct phylink *pl = upstream;
+	int ret;
 
 	/* If this SFP module has a PHY, start the PHY now. */
 	if (pl->phydev) {
 		phy_start(pl->phydev);
 		return 0;
+	} else {
+		ret = phylink_add_sfp_mod_port(pl);
+		if (ret)
+			return ret;
 	}
 
 	/* If the module may have a PHY but we didn't detect one we
@@ -3940,7 +3997,16 @@ static int phylink_sfp_module_start(void *upstream)
 	if (!pl->sfp_may_have_phy)
 		return 0;
 
-	return phylink_sfp_config_optical(pl);
+	ret = phylink_sfp_config_optical(pl);
+	if (ret)
+		goto del_mod_port;
+
+	return 0;
+
+del_mod_port:
+	phylink_del_sfp_mod_port(pl);
+
+	return ret;
 }
 
 static void phylink_sfp_module_stop(void *upstream)
@@ -3950,6 +4016,8 @@ static void phylink_sfp_module_stop(void *upstream)
 	/* If this SFP module has a PHY, stop it. */
 	if (pl->phydev)
 		phy_stop(pl->phydev);
+	else
+		phylink_del_sfp_mod_port(pl);
 }
 
 static void phylink_sfp_link_down(void *upstream)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 11092c3175b3..dfe0326eab27 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -582,6 +582,7 @@ struct phy_oatc14_sqi_capability {
  * @wol_enabled: Set to true if the PHY or the attached MAC have Wake-on-LAN
  * 		 enabled.
  * @is_genphy_driven: PHY is driven by one of the generic PHY drivers
+ * @has_sfp_mod_phy: Set true if downstream SFP bus's module contains a PHY
  * @state: State of the PHY for management purposes
  * @dev_flags: Device-specific flags used by the PHY driver.
  *
@@ -594,6 +595,8 @@ struct phy_oatc14_sqi_capability {
  * @phylink: Pointer to phylink instance for this PHY
  * @sfp_bus_attached: Flag indicating whether the SFP bus has been attached
  * @sfp_bus: SFP bus attached to this PHY's fiber port
+ * @sfp_cage_port: The phy_port connected to the downstream SFP cage
+ * @mod_port: phy_port representing the SFP module, if it is phy-less
  * @attached_dev: The attached enet driver's device instance ptr
  * @adjust_link: Callback for the enet controller to respond to changes: in the
  *               link state.
@@ -706,6 +709,7 @@ struct phy_device {
 	unsigned irq_rerun:1;
 
 	unsigned default_timestamp:1;
+	unsigned has_sfp_mod_phy:1;
 
 	int rate_matching;
 
@@ -785,6 +789,8 @@ struct phy_device {
 	/* This may be modified under the rtnl lock */
 	bool sfp_bus_attached;
 	struct sfp_bus *sfp_bus;
+	struct phy_port *sfp_cage_port;
+	struct phy_port *mod_port;
 	struct phylink *phylink;
 	struct net_device *attached_dev;
 	struct mii_timestamper *mii_ts;
-- 
2.55.0


  parent reply	other threads:[~2026-08-01  7:44 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-01  7:43 [PATCH net-next v15 00/10] net: phy_port: SFP modules representation and phy_port listing Maxime Chevallier
2026-08-01  7:43 ` [PATCH net-next v15 01/10] net: phy: phy_link_topology: Add a helper for opportunistic alloc Maxime Chevallier
2026-08-01  7:43 ` [PATCH net-next v15 02/10] net: phy: phy_link_topology: Track ports in phy_link_topology Maxime Chevallier
2026-08-01  7:43 ` [PATCH net-next v15 03/10] net: phylink: Register a phy_port for MAC-driven SFP cages Maxime Chevallier
2026-08-01  7:43 ` [PATCH net-next v15 04/10] net: phy: Create SFP phy_port before registering upstream Maxime Chevallier
2026-08-01  7:43 ` Maxime Chevallier [this message]
2026-08-01  7:43 ` [PATCH net-next v15 06/10] net: phy: phy_port: Store information about a port's upstream Maxime Chevallier
2026-08-01  7:43 ` [PATCH net-next v15 07/10] net: phy: phy_link_topology: Add a helper to retrieve ports Maxime Chevallier
2026-08-01  7:43 ` [PATCH net-next v15 08/10] netlink: specs: Add ethernet port listing with ethtool Maxime Chevallier
2026-08-01  7:43 ` [PATCH net-next v15 09/10] net: ethtool: Introduce ethtool command to list ports Maxime Chevallier
2026-08-01  7:43 ` [PATCH net-next v15 10/10] Documentation: networking: Update the phy_port infrastructure description Maxime Chevallier
2026-08-03 21:04 ` [PATCH net-next v15 00/10] net: phy_port: SFP modules representation and phy_port listing Jakub Kicinski
2026-08-04  7:21   ` Maxime Chevallier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260801074332.98755-6-maxime.chevallier@bootlin.com \
    --to=maxime.chevallier@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=christophe.leroy@csgroup.eu \
    --cc=daniel@makrotopia.org \
    --cc=davem@davemloft.net \
    --cc=dimitri.fedrau@liebherr.com \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=frank.wunderlich@linux.dev \
    --cc=herve.codina@bootlin.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=kabel@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mwojtas@chromium.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicveronese@gmail.com \
    --cc=o.rempel@pengutronix.de \
    --cc=p.ameruoso@live.it \
    --cc=pabeni@redhat.com \
    --cc=romain.gantois@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.