From: kernel test robot <lkp@intel.com>
To: "David Lechner (TI)" <dlechner@baylibre.com>
Cc: oe-kbuild-all@lists.linux.dev, linux-doc@vger.kernel.org
Subject: [dlech:b4/iio-adc-ti-ads122c14 1/14] htmldocs: Documentation/iio/ads112c14.rst:57: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Date: Sat, 01 Aug 2026 08:49:45 +0200 [thread overview]
Message-ID: <202608010857.ceqTcPRr-lkp@intel.com> (raw)
tree: https://github.com/dlech/linux b4/iio-adc-ti-ads122c14
head: c0c226e06d7019964f60738cde5a3eae4f0c0814
commit: 368fd704de0b90a9f9c30683d25db116ef8308bc [1/14] WIP
compiler: clang version 22.1.8 (https://github.com/llvm/llvm-project ca7933e47d3a3451d81e72ac174dcb5aa28b59d1)
docutils: docutils (Docutils 0.21.2, Python 3.13.5, on linux)
reproduce: (https://download.01.org/0day-ci/archive/20260801/202608010857.ceqTcPRr-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202608010857.ceqTcPRr-lkp@intel.com/
All warnings (new ones prefixed by >>):
Runtime Survivability
===================== [docutils]
Documentation/iio/ads112c14.rst:56: ERROR: Unexpected indentation. [docutils]
>> Documentation/iio/ads112c14.rst:57: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
WARNING: ./include/linux/damon.h:909 struct member 'probes' not described in 'damon_ctx'
WARNING: ./include/linux/damon.h:909 struct member 'rnd_state' not described in 'damon_ctx'
WARNING: ./include/linux/damon.h:909 struct member 'probes' not described in 'damon_ctx'
WARNING: ./include/linux/damon.h:909 struct member 'rnd_state' not described in 'damon_ctx'
Documentation/mm/memfd_preservation:7: ./mm/memfd_luo.c:13: ERROR: Unexpected section title.
--
Documentation/userspace-api/landlock:596: ./include/uapi/linux/landlock.h:63: ERROR: Unknown target name: "scope flags". [docutils]
Documentation/userspace-api/landlock:596: ./include/uapi/linux/landlock.h:24: ERROR: Unknown target name: "filesystem flags". [docutils]
Documentation/userspace-api/landlock:605: ./include/uapi/linux/landlock.h:228: ERROR: Unknown target name: "filesystem flags". [docutils]
Documentation/userspace-api/landlock:605: ./include/uapi/linux/landlock.h:251: ERROR: Unknown target name: "network flags". [docutils]
Documentation/networking/netlink_spec/index.rst: WARNING: document isn't included in any toctree [toc.not_included]
>> Documentation/iio/ads112c14.rst:22: WARNING: unknown document: '../devicetree/bindings/iio/adc/ti,ads112c14' [ref.doc]
Documentation/networking/checksum-offloads:157: ./include/linux/skbuff.h:181: WARNING: Failed to create a cross reference. A title or caption not found: 'crc' [ref.ref]
vim +57 Documentation/iio/ads112c14.rst
21
> 22 See :doc:`../devicetree/bindings/iio/adc/ti,ads112c14` for the complete
23 binding description.
24
25 The minimal device tree node looks like this::
26
27 adc@40 {
28 compatible = "ti,ads122c14";
29 reg = <0x40>;
30 avdd-supply = <&avdd>;
31 dvdd-supply = <&dvdd>;
32
33 /* TODO: add channel@ nodes here */
34 };
35
36 Effect of devicetree on registers
37 ---------------------------------
38
39 Device properties have the following effects on registers:
40
41 * ``CLK_SEL`` and ``GPIO3_CFG`` are set if the ``clocks`` property is present.
42 * ``GPIO2_SRC`` may be set when ``interrupts`` and ``interrupt-names`` for
43 "fault" is present.
44 * ``GPIO3_SRC`` may be set when ``interrupts`` and ``interrupt-names`` for
45 "drdy" is present.
46
47 Channel-specific properties have the following effects on registers only when
48 a measurement is active on the channel:
49
50 * ``AINP`` and ``AINN`` are set according to the ``single-channel`` or
51 ``diff-channel`` properties of each channel.
52 * ``REF_SEL`` and ``REF_VAL`` will be set according to the value of the
53 ``reference-sources`` property.
54 * When ``reference-sources`` is set to "external":
55 * If ``refp-supply`` is given and not the same phandle as ``avdd-supply``,
56 ``REFP_BUF_EN`` will be set to 1, otherwise it will be 0.
> 57 * If ``refn-supply`` is given, ``REFN_BUF_EN`` will be set to 1, otherwise it
58 will be 0.
59 * ``I1MUX`` and ``I2MUX`` will be set to the values of the ``excitation-channels``
60 property.
61 * ``IUNIT``, ``I1MAG`` and ``I2MAG`` will be set to best fit according to the
62 values of the ``excitation-current-nanoamp`` property.
63 * ``GC_EN`` will be set to 1 if the ``input-chopping`` property is present,
64 otherwise it will be 0.
65 * ``CODING`` is set based on the ``bipolar`` property.
66 * ``DELAY`` is set based on the ``settling-time-us`` property.
67
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2026-08-01 6:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202608010857.ceqTcPRr-lkp@intel.com \
--to=lkp@intel.com \
--cc=dlechner@baylibre.com \
--cc=linux-doc@vger.kernel.org \
--cc=oe-kbuild-all@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.