[PATCH v1] coresight: Check runtime PM resume result

[Yuho Choi <dbgh9129@gmail.com>]

coresight_get_ref() ignores the return value of pm_runtime_get_sync()
and reports success even when runtime resume fails. A path is then built
and the CoreSight device may be accessed while it remains powered off.

Use pm_runtime_resume_and_get() so a failed resume is reported and its
runtime PM usage reference is rolled back. Drop the module and device
references acquired before the resume attempt when it fails.

Fixes: 5da5325fa856 ("coresight: moving PM runtime operations to core framework")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
---
 drivers/hwtracing/coresight/coresight-core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
index 6d65c43d574f..77d05b360484 100644
--- a/drivers/hwtracing/coresight/coresight-core.c
+++ b/drivers/hwtracing/coresight/coresight-core.c
@@ -843,7 +843,11 @@ static bool coresight_get_ref(struct coresight_device *csdev)
 		goto err_module;
 
 	/* Make sure the device is powered on */
-	pm_runtime_get_sync(parent);
+	if (pm_runtime_resume_and_get(parent) < 0) {
+		module_put(drv->owner);
+		goto err_module;
+	}
+
 	return true;
 
 err_module:
-- 
2.43.0