All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: linux-sound@vger.kernel.org
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	Michal Simek <michal.simek@amd.com>,
	linux-arm-kernel@lists.infradead.org (moderated list:ARM/ZYNQ
	ARCHITECTURE), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] ASoC: xilinx: replace OF with device handlers
Date: Mon,  3 Aug 2026 16:18:23 -0700	[thread overview]
Message-ID: <20260803231823.95147-1-rosenp@gmail.com> (raw)

All of these usages of OF handlers use the node from the
platform_device. Use the device member to simplify slightly.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 sound/soc/xilinx/xlnx_formatter_pcm.c |  2 --
 sound/soc/xilinx/xlnx_i2s.c           | 12 +++++-------
 sound/soc/xilinx/xlnx_spdif.c         |  8 +++-----
 3 files changed, 8 insertions(+), 14 deletions(-)

diff --git a/sound/soc/xilinx/xlnx_formatter_pcm.c b/sound/soc/xilinx/xlnx_formatter_pcm.c
index 8f7a76758535..55b5b473d85f 100644
--- a/sound/soc/xilinx/xlnx_formatter_pcm.c
+++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
@@ -9,8 +9,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/sizes.h>
 
 #include <sound/asoundef.h>
diff --git a/sound/soc/xilinx/xlnx_i2s.c b/sound/soc/xilinx/xlnx_i2s.c
index 0676da122edd..273258125497 100644
--- a/sound/soc/xilinx/xlnx_i2s.c
+++ b/sound/soc/xilinx/xlnx_i2s.c
@@ -9,9 +9,8 @@
 
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
@@ -174,7 +173,6 @@ static int xlnx_i2s_probe(struct platform_device *pdev)
 	int ret;
 	u32 format;
 	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node;
 
 	drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL);
 	if (!drv_data)
@@ -184,13 +182,13 @@ static int xlnx_i2s_probe(struct platform_device *pdev)
 	if (IS_ERR(drv_data->base))
 		return PTR_ERR(drv_data->base);
 
-	ret = of_property_read_u32(node, "xlnx,num-channels", &drv_data->channels);
+	ret = device_property_read_u32(dev, "xlnx,num-channels", &drv_data->channels);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "cannot get supported channels\n");
 
 	drv_data->channels *= 2;
 
-	ret = of_property_read_u32(node, "xlnx,dwidth", &drv_data->data_width);
+	ret = device_property_read_u32(dev, "xlnx,dwidth", &drv_data->data_width);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "cannot get data width\n");
 
@@ -205,7 +203,7 @@ static int xlnx_i2s_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (of_device_is_compatible(node, "xlnx,i2s-transmitter-1.0")) {
+	if (device_is_compatible(dev, "xlnx,i2s-transmitter-1.0")) {
 		drv_data->dai_drv.name = "xlnx_i2s_playback";
 		drv_data->dai_drv.playback.stream_name = "Playback";
 		drv_data->dai_drv.playback.formats = format;
@@ -213,7 +211,7 @@ static int xlnx_i2s_probe(struct platform_device *pdev)
 		drv_data->dai_drv.playback.channels_max = drv_data->channels;
 		drv_data->dai_drv.playback.rates	= SNDRV_PCM_RATE_8000_192000;
 		drv_data->dai_drv.ops = &xlnx_i2s_dai_ops;
-	} else if (of_device_is_compatible(node, "xlnx,i2s-receiver-1.0")) {
+	} else if (device_is_compatible(dev, "xlnx,i2s-receiver-1.0")) {
 		drv_data->dai_drv.name = "xlnx_i2s_capture";
 		drv_data->dai_drv.capture.stream_name = "Capture";
 		drv_data->dai_drv.capture.formats = format;
diff --git a/sound/soc/xilinx/xlnx_spdif.c b/sound/soc/xilinx/xlnx_spdif.c
index ae05818ba064..a70ca6beb646 100644
--- a/sound/soc/xilinx/xlnx_spdif.c
+++ b/sound/soc/xilinx/xlnx_spdif.c
@@ -10,8 +10,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
+#include <linux/property.h>
 #include <linux/platform_device.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -242,7 +241,6 @@ static int xlnx_spdif_probe(struct platform_device *pdev)
 	struct spdif_dev_data *ctx;
 
 	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node;
 
 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
@@ -257,7 +255,7 @@ static int xlnx_spdif_probe(struct platform_device *pdev)
 	if (IS_ERR(ctx->base))
 		return PTR_ERR(ctx->base);
 
-	ret = of_property_read_u32(node, "xlnx,spdif-mode", &ctx->mode);
+	ret = device_property_read_u32(dev, "xlnx,spdif-mode", &ctx->mode);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "cannot get SPDIF mode\n");
 
@@ -278,7 +276,7 @@ static int xlnx_spdif_probe(struct platform_device *pdev)
 		dai_drv = &xlnx_spdif_rx_dai;
 	}
 
-	ret = of_property_read_u32(node, "xlnx,aud_clk_i", &ctx->aclk);
+	ret = device_property_read_u32(dev, "xlnx,aud_clk_i", &ctx->aclk);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "cannot get aud_clk_i value\n");
 
-- 
2.55.0



             reply	other threads:[~2026-08-03 23:18 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-03 23:18 Rosen Penev [this message]
2026-08-04  7:53 ` [PATCH] ASoC: xilinx: replace OF with device handlers Vincenzo Frascino
2026-08-04 19:50 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260803231823.95147-1-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=michal.simek@amd.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=vincenzo.frascino@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.