[PATCH 1/4] ASoC: ml26124: sort the register default table

[Peter Ujfalusi <peter.ujfalusi@linux.intel.com>]

reg_defaults must be sorted by ascending register address, as
regcache_lookup_reg() locates entries in it with bsearch().  See commit
fd80df352ba1 ("regcache: Add support for sorting defaults arrays").

The Mic Select Control register (0xe8) is listed in the analog path
control group, between 0x5a and 0x60, which makes it unreachable.
regcache_reg_needs_sync() then cannot compare it against its default and
reports that a sync is needed, so it is written to the device on every
regcache_sync() even when it was never touched.

Move the entry to the end of the table, where it belongs by address.

Fixes: d808fe9f3e7f ("ASoC: Add LAPIS Semiconductor ML26124 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
---
 sound/soc/codecs/ml26124.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/ml26124.c b/sound/soc/codecs/ml26124.c
index 8a14626d43ff..7209b47c2029 100644
--- a/sound/soc/codecs/ml26124.c
+++ b/sound/soc/codecs/ml26124.c
@@ -224,7 +224,6 @@ static const struct reg_default ml26124_reg[] = {
 	/* Analog Path Control Register */
 	{0x54, 0x00},	/* Speaker AMP Output Control */
 	{0x5a, 0x00},	/* Mic IF Control */
-	{0xe8, 0x01},	/* Mic Select Control */
 
 	/* Audio Interface Control Register */
 	{0x60, 0x00},	/* SAI-Trans Control */
@@ -287,6 +286,9 @@ static const struct reg_default ml26124_reg[] = {
 	{0xd0, 0x01},	/* VIDEO AMP Gain Control */
 	{0xd2, 0x01},	/* VIDEO AMP Setup 1 */
 	{0xd4, 0x01},	/* VIDEO AMP Control2 */
+
+	/* Analog Path Control Register */
+	{0xe8, 0x01},	/* Mic Select Control */
 };
 
 /* Get sampling rate value of sampling rate setting register (0x0) */
-- 
2.55.0