All of lore.kernel.org
 help / color / mirror / Atom feed
From: Allison Henderson <achender@kernel.org>
To: netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
	pabeni@redhat.com, edumazet@google.com, kuba@kernel.org,
	horms@kernel.org
Cc: achender@kernel.org, jhubbard@nvidia.com, leon@kernel.org
Subject: [PATCH net-next 3/4] net/rds: acquire the fastpath locks in rds_conn_shutdown()
Date: Thu,  6 Aug 2026 00:20:44 -0700	[thread overview]
Message-ID: <20260806072045.1092968-4-achender@kernel.org> (raw)
In-Reply-To: <20260806072045.1092968-1-achender@kernel.org>

From: Håkon Bugge <haakon.bugge@oracle.com>

rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset().  Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.

The sender does recheck the connection state after taking the lock,
but that recheck is a classic store-buffering pattern: teardown writes
the state and reads the bit while the sender writes the bit and reads
the state.  acquire_in_xmit() is only an acquire operation, so on
weakly ordered architectures both sides can miss each other's write,
and the transmit path then runs while the transport zeroes its rings
(e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the
transmit state under it.

Oracle UEK fixed the same class of crashes - a 14-year tail of
BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL
dereferences in rds_ib_send_cqe_handler() during failover testing -
by making the teardown path *acquire* the fastpath bit locks instead
of testing them ("rds: Make sure transmit path and connection
tear-down does not run concurrently").  Ownership of a single word is
decided by RMW atomicity, so no cross-variable ordering is needed.

Do the same here: take both locks before calling the transport
shutdown, hold them across rds_conn_path_reset(), and release them
explicitly afterwards.  All other users of these bits are trylock
style (rds_send_xmit(), the IB send tasklet, rds_ib_recv_refill()),
so they back off while teardown owns the locks and no new lock
dependency is introduced.  The explicit release with a wake-up also
covers waiters such as rds_tcp_reset_callbacks() that would otherwise
miss the silent clear inside rds_conn_path_reset().

Fixes: 0f4b1c7e89e6 ("rds: fix rds_send_xmit() serialization")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
[achender: reimplement for net-next shutdown path: acquire the existing
 RDS_IN_XMIT/RDS_RECV_REFILL bit locks in rds_conn_shutdown() and release
  after teardown; update commit message]
Assisted-by: Claude-Code:claude-fable-5
Signed-off-by: Allison Henderson <achender@kernel.org>
---
 net/rds/connection.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/net/rds/connection.c b/net/rds/connection.c
index 7c8ab8e973e1b..406a071efdd3b 100644
--- a/net/rds/connection.c
+++ b/net/rds/connection.c
@@ -406,14 +406,32 @@ void rds_conn_shutdown(struct rds_conn_path *cp)
 		}
 		mutex_unlock(&cp->cp_cm_lock);
 
+		/* Quiesce the transmit and receive-refill paths by
+		 * acquiring their bit locks, not merely waiting for
+		 * them to be released: with a plain wait, either path
+		 * can re-take its lock the instant after we sample it
+		 * clear and then run concurrently with the transport
+		 * shutdown and the path reset below.  Holding both
+		 * locks across the teardown makes that structurally
+		 * impossible.
+		 */
 		wait_event(cp->cp_waitq,
-			   !test_bit(RDS_IN_XMIT, &cp->cp_flags));
+			   !test_and_set_bit_lock(RDS_IN_XMIT, &cp->cp_flags));
 		wait_event(cp->cp_waitq,
-			   !test_bit(RDS_RECV_REFILL, &cp->cp_flags));
+			   !test_and_set_bit(RDS_RECV_REFILL, &cp->cp_flags));
 
 		conn->c_trans->conn_path_shutdown(cp);
 		rds_conn_path_reset(cp);
 
+		/* rds_conn_path_reset() already cleared cp_flags, but
+		 * release the two locks explicitly and wake any waiter
+		 * (e.g. rds_tcp_reset_callbacks()) that sampled the
+		 * locks while we held them.
+		 */
+		clear_bit_unlock(RDS_IN_XMIT, &cp->cp_flags);
+		clear_bit(RDS_RECV_REFILL, &cp->cp_flags);
+		wake_up_all(&cp->cp_waitq);
+
 		if (!rds_conn_path_transition(cp, RDS_CONN_DISCONNECTING,
 					      RDS_CONN_DOWN) &&
 		    !rds_conn_path_transition(cp, RDS_CONN_ERROR,
-- 
2.25.1


  parent reply	other threads:[~2026-08-06  7:20 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-06  7:20 [PATCH net-next 0/4] net/rds: Bug fix ports, part 2 Allison Henderson
2026-08-06  7:20 ` [PATCH net-next 1/4] net/rds: reinitialize to_be_dropped on rds_send_xmit() restart Allison Henderson
2026-08-06  7:20 ` [PATCH net-next 2/4] net/rds: initialize i_conn_path in rds_inc_init() Allison Henderson
2026-08-06  7:20 ` Allison Henderson [this message]
2026-08-06  7:20 ` [PATCH net-next 4/4] net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() Allison Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260806072045.1092968-4-achender@kernel.org \
    --to=achender@kernel.org \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=jhubbard@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=leon@kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.