[PATCHv2 2/4] EDAC/altera: Drop __init from ECC setup paths for re-probe safety

[Dinh Nguyen <dinguyen@kernel.org>]

sashiko reports: Does suppressing sysfs unbinding fully prevent the
execution of freed __init memory? If altr_sysmgr_regmap_lookup_by_phandle()
returns -EPROBE_DEFER, the probe is deferred until after __init memory is
freed.

The a10 EDAC .setup callbacks (sdmmc, ethernet, nand, dma, usb, qspi)
and their helpers (altr_init_a10_ecc_device_type,
altr_init_a10_ecc_block) were marked __init. These run from the probe
path, which may execute after init memory is freed -- e.g. a probe
deferred via -EPROBE_DEFER that only succeeds once a late/module
dependency appears, or a manual unbind/rebind. Calling __init code then
dereferences freed memory. Remove __init so these functions remain
valid at runtime.

Assisted-by: Cursor:claude-4.8-opus
Fixes: 788586efd116 ("EDAC/altera: Initialize peripheral FIFOs in probe()")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
 drivers/edac/altera_edac.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index fe501c89dd0dc..d8a3438fb5f44 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -926,7 +926,7 @@ static int __maybe_unused altr_init_memory_port(void __iomem *ioaddr, int port)
 	return ret;
 }
 
-static __init int __maybe_unused
+static int __maybe_unused
 altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
 			u32 ecc_ctrl_en_mask, bool dual_port)
 {
@@ -1001,7 +1001,7 @@ altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
 
 static int validate_parent_available(struct device_node *np);
 static const struct of_device_id altr_edac_a10_device_of_match[];
-static int __init __maybe_unused altr_init_a10_ecc_device_type(char *compat)
+static int __maybe_unused altr_init_a10_ecc_device_type(char *compat)
 {
 	int irq;
 	struct device_node *child, *np;
@@ -1330,7 +1330,7 @@ static const struct edac_device_prv_data a10_l2ecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_ETHERNET
 
-static int __init socfpga_init_ethernet_ecc(struct altr_edac_device_dev *dev)
+static int socfpga_init_ethernet_ecc(struct altr_edac_device_dev *dev)
 {
 	int ret;
 
@@ -1360,7 +1360,7 @@ static const struct edac_device_prv_data a10_enetecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_NAND
 
-static int __init socfpga_init_nand_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_nand_ecc(struct altr_edac_device_dev *device)
 {
 	int ret;
 
@@ -1390,7 +1390,7 @@ static const struct edac_device_prv_data a10_nandecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_DMA
 
-static int __init socfpga_init_dma_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_dma_ecc(struct altr_edac_device_dev *device)
 {
 	int ret;
 
@@ -1420,7 +1420,7 @@ static const struct edac_device_prv_data a10_dmaecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_USB
 
-static int __init socfpga_init_usb_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_usb_ecc(struct altr_edac_device_dev *device)
 {
 	int ret;
 
@@ -1450,7 +1450,7 @@ static const struct edac_device_prv_data a10_usbecc_data = {
 
 #ifdef CONFIG_EDAC_ALTERA_QSPI
 
-static int __init socfpga_init_qspi_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_qspi_ecc(struct altr_edac_device_dev *device)
 {
 	int ret;
 
@@ -1598,7 +1598,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 	return rc;
 }
 
-static int __init socfpga_init_sdmmc_ecc(struct altr_edac_device_dev *device)
+static int socfpga_init_sdmmc_ecc(struct altr_edac_device_dev *device)
 {
 	int rc = -ENODEV;
 	struct device_node *child;
-- 
2.42.0.411.g813d9a9188