From: Fangzhi Zuo <jerry.zuo@amd.com>
To: <amd-gfx@lists.freedesktop.org>
Cc: dri-devel@lists.freedesktop.org,
"Tomasz Pakuła" <tomasz.pakula.oficjalny@gmail.com>,
"Fangzhi Zuo" <Jerry.Zuo@amd.com>,
"Bernhard Berger" <bernhard.berger@gmail.com>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"open list" <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 2/4] drm/edid: parse HDMI 2.1 gaming (ALLM/VRR) capabilities from HF-VSDB
Date: Thu, 6 Aug 2026 16:54:46 -0400 [thread overview]
Message-ID: <20260806205449.16806-3-jerry.zuo@amd.com> (raw)
In-Reply-To: <20260806205449.16806-1-jerry.zuo@amd.com>
From: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Parse the HDMI 2.1 gaming-related capabilities advertised in the HDMI
Forum VSDB (HF-VSDB) and expose them through struct drm_hdmi_info so
drivers can consume them.
Add struct drm_hdmi_vrr_cap describing the sink's VRR capabilities: Fast
VActive (Quick Frame Transport), Negative M VRR, Cinema VRR, MDelta, and
the VRRmin/VRRmax range, together with a "supported" flag derived from
that range. Add the fapa_start_location and allm (Auto Low Latency Mode)
flags to struct drm_hdmi_info.
drm_parse_hdmi_gaming_info() reads byte 8 of the HF-VSDB for the
FAPA/ALLM/FVA/CNMVRR/CinemaVRR/MDelta flags and bytes 9-10 for
VRRmin/VRRmax. Per HDMI 2.1, VRR is considered supported when VRRmin is
within 1-48 and VRRmax is either 0 (maximum based on the video mode) or
>= 100. It is invoked from drm_parse_hdmi_forum_scds(), and the parsed
values are logged for debugging.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Bernhard Berger <bernhard.berger@gmail.com>
---
drivers/gpu/drm/drm_edid.c | 42 +++++++++++++++++++++++++++++++++
include/drm/drm_connector.h | 47 +++++++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index ae26618a9a57..d508ec633c9b 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -6182,6 +6182,33 @@ static void drm_parse_ycbcr420_deep_color_info(struct drm_connector *connector,
hdmi->y420_dc_modes = dc_mask;
}
+static void drm_parse_hdmi_gaming_info(struct drm_hdmi_info *hdmi, const u8 *db)
+{
+ struct drm_hdmi_vrr_cap *vrr = &hdmi->vrr_cap;
+
+ if (cea_db_payload_len(db) < 8)
+ return;
+
+ hdmi->fapa_start_location = db[8] & DRM_EDID_FAPA_START_LOCATION;
+ hdmi->allm = db[8] & DRM_EDID_ALLM;
+ vrr->fva = db[8] & DRM_EDID_FVA;
+ vrr->cnmvrr = db[8] & DRM_EDID_CNMVRR;
+ vrr->cinema_vrr = db[8] & DRM_EDID_CINEMA_VRR;
+ vrr->mdelta = db[8] & DRM_EDID_MDELTA;
+
+ if (cea_db_payload_len(db) < 9)
+ return;
+
+ vrr->vrr_min = db[9] & DRM_EDID_VRR_MIN_MASK;
+ vrr->supported = (vrr->vrr_min > 0 && vrr->vrr_min <= 48);
+
+ if (cea_db_payload_len(db) < 10)
+ return;
+
+ vrr->vrr_max = (db[9] & DRM_EDID_VRR_MAX_UPPER_MASK) << 2 | db[10];
+ vrr->supported &= (vrr->vrr_max == 0 || vrr->vrr_max >= 100);
+}
+
static void drm_parse_dsc_info(struct drm_hdmi_dsc_cap *hdmi_dsc,
const u8 *hf_scds)
{
@@ -6308,6 +6335,8 @@ static void drm_parse_hdmi_forum_scds(struct drm_connector *connector,
drm_parse_ycbcr420_deep_color_info(connector, hf_scds);
+ drm_parse_hdmi_gaming_info(&connector->display_info.hdmi, hf_scds);
+
if (cea_db_payload_len(hf_scds) >= 11 && hf_scds[11]) {
drm_parse_dsc_info(hdmi_dsc, hf_scds);
dsc_support = true;
@@ -6317,6 +6346,19 @@ static void drm_parse_hdmi_forum_scds(struct drm_connector *connector,
"[CONNECTOR:%d:%s] HF-VSDB: max TMDS clock: %d KHz, HDMI 2.1 support: %s, DSC 1.2 support: %s\n",
connector->base.id, connector->name,
max_tmds_clock, str_yes_no(max_frl_rate), str_yes_no(dsc_support));
+ drm_dbg_kms(connector->dev,
+ "[CONNECTOR:%d:%s] FAPA in blanking: %s, ALLM support: %s, Fast Vactive support: %s\n",
+ connector->base.id, connector->name, str_yes_no(hdmi->fapa_start_location),
+ str_yes_no(hdmi->allm), str_yes_no(hdmi->vrr_cap.fva));
+ drm_dbg_kms(connector->dev,
+ "[CONNECTOR:%d:%s] Negative M VRR support: %s, CinemaVRR support: %s, Mdelta: %d\n",
+ connector->base.id, connector->name, str_yes_no(hdmi->vrr_cap.cnmvrr),
+ str_yes_no(hdmi->vrr_cap.cinema_vrr), hdmi->vrr_cap.mdelta);
+ drm_dbg_kms(connector->dev,
+ "[CONNECTOR:%d:%s] VRRmin: %u, VRRmax: %u, VRR supported: %s\n",
+ connector->base.id, connector->name, hdmi->vrr_cap.vrr_min,
+ hdmi->vrr_cap.vrr_max, str_yes_no(hdmi->vrr_cap.supported));
+
}
static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector,
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index cd06a3b914a0..9f8f109c2dd1 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -254,6 +254,44 @@ struct drm_scdc {
struct drm_scrambling scrambling;
};
+/**
+ * struct drm_hdmi_vrr_cap - Information about VRR capabilities of a HDMI sink
+ *
+ * Describes the VRR support provided by HDMI 2.1 sink. The information is
+ * fetched fom additional HFVSDB blocks defined for HDMI 2.1.
+ */
+struct drm_hdmi_vrr_cap {
+ /** @fva: flag for Fast VActive (Quick Frame Transport) support */
+ bool fva;
+
+ /** @mcnmvrr: flag for Negative M VRR support */
+ bool cnmvrr;
+
+ /** @mcinema_vrr: flag for Cinema VRR support */
+ bool cinema_vrr;
+
+ /** @mdelta: flag for limited frame-to-frame compensation support */
+ bool mdelta;
+
+ /**
+ * @vrr_min : minimum supported variable refresh rate in Hz.
+ * Valid values only inide 1 - 48 range
+ */
+ u16 vrr_min;
+
+ /**
+ * @vrr_max : maximum supported variable refresh rate in Hz (optional).
+ * Valid values are either 0 (max based on video mode) or >= 100
+ */
+ u16 vrr_max;
+
+ /**
+ * @supported: flag for vrr support based on checking for VRRmin and
+ * VRRmax values having correct values.
+ */
+ bool supported;
+};
+
/**
* struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink
*
@@ -330,6 +368,15 @@ struct drm_hdmi_info {
/** @max_lanes: supported by sink */
u8 max_lanes;
+ /** @fapa_start_location: flag for the FAPA in blanking support */
+ bool fapa_start_location;
+
+ /** @allm: flag for Auto Low Latency Mode support by sink */
+ bool allm;
+
+ /** @vrr_cap: VRR capabilities of the sink */
+ struct drm_hdmi_vrr_cap vrr_cap;
+
/** @dsc_cap: DSC capabilities of the sink */
struct drm_hdmi_dsc_cap dsc_cap;
};
--
2.53.0
next prev parent reply other threads:[~2026-08-06 20:54 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-30 17:17 [PATCH 1/4] drm/amd/display: Add 2.1 FreeSync support for AMD VSDB EDID Block Fangzhi Zuo
2026-07-30 17:17 ` [PATCH 2/4] drm/edid: parse HDMI 2.1 gaming (ALLM/VRR) capabilities from HF-VSDB Fangzhi Zuo
2026-07-31 19:55 ` Harry Wentland
2026-07-30 17:17 ` [PATCH 3/4] drm/amd/display: Add HDMI 2.1 VRR support " Fangzhi Zuo
2026-07-31 19:57 ` Harry Wentland
2026-08-06 20:17 ` Zuo, Jerry
2026-07-30 17:17 ` [PATCH 4/4] drm/amd/display: Add HDMI ALLM support Fangzhi Zuo
2026-07-31 20:11 ` Harry Wentland
2026-08-06 20:20 ` Zuo, Jerry
2026-07-31 19:37 ` [PATCH 1/4] drm/amd/display: Add 2.1 FreeSync support for AMD VSDB EDID Block Harry Wentland
2026-08-06 20:54 ` [PATCH v2 0/4] HDMI 2.1 VRR and ALLM support Fangzhi Zuo
2026-08-06 20:54 ` [PATCH v2 1/4] drm/amd/display: Add 2.1 FreeSync support for AMD VSDB EDID Block Fangzhi Zuo
2026-08-06 21:13 ` sashiko-bot
2026-08-06 20:54 ` Fangzhi Zuo [this message]
2026-08-06 20:54 ` [PATCH v2 3/4] drm/amd/display: Add HDMI 2.1 VRR support from HF-VSDB Fangzhi Zuo
2026-08-06 21:07 ` sashiko-bot
2026-08-06 20:54 ` [PATCH v2 4/4] drm/amd/display: Add HDMI ALLM support Fangzhi Zuo
2026-08-06 21:08 ` sashiko-bot
2026-08-10 21:04 ` Harry Wentland
2026-08-11 0:39 ` [PATCH v3 0/4] HDMI 2.1 VRR and " Fangzhi Zuo
2026-08-11 0:39 ` [PATCH v3 1/4] drm/amd/display: Add 2.1 FreeSync support for AMD VSDB EDID Block Fangzhi Zuo
2026-08-11 0:39 ` [PATCH v3 2/4] drm/edid: parse HDMI 2.1 gaming (ALLM/VRR) capabilities from HF-VSDB Fangzhi Zuo
2026-08-11 0:39 ` [PATCH v3 3/4] drm/amd/display: Add HDMI 2.1 VRR support " Fangzhi Zuo
2026-08-11 0:39 ` [PATCH v3 4/4] drm/amd/display: Add HDMI ALLM support Fangzhi Zuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260806205449.16806-3-jerry.zuo@amd.com \
--to=jerry.zuo@amd.com \
--cc=airlied@gmail.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=bernhard.berger@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=simona@ffwll.ch \
--cc=tomasz.pakula.oficjalny@gmail.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.