From: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-scsi@vger.kernel.org, target-devel@vger.kernel.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Shuangpeng Bai <shuangpeng.kernel@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH] usb: gadget: f_tcm: keep port count until LUN teardown completes
Date: Fri, 7 Aug 2026 02:07:33 -0400 [thread overview]
Message-ID: <20260807060733.3186624-1-shuangpeng.kernel@gmail.com> (raw)
tcm_usbg_drop_nexus() permits session removal once tpg_port_count
reaches zero. However, usbg_port_unlink() currently decrements that
count from the fabric_pre_unlink() callback, before core_dev_del_lun()
waits for active se_lun references to drain.
If removal of the last LUN races a nexus removal, the latter can observe
a zero port count and call target_remove_session(). This frees
sess_cmd_map while an in-flight struct usbg_cmd, including its work item,
can still be accessed.
Overlapping the last-LUN unlink with nexus removal reproduces this
lifetime violation as a DEBUG_OBJECTS "free active" warning for
usbg_cmd_work, followed by a target-core BUG/Oops.
The generic target-core unlink path has no callback after
core_dev_del_lun() completes. Add an optional fabric_post_unlink()
callback and use it for the f_tcm port count. The count now remains
nonzero until core_dev_del_lun() has finished draining active LUN
references, preventing nexus removal from freeing the session during
command completion.
Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable@vger.kernel.org
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
---
drivers/target/target_core_fabric_configfs.c | 8 ++++++++
drivers/usb/gadget/function/f_tcm.c | 2 +-
include/target/target_core_fabric.h | 2 ++
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c
index 166dbf4c4061..ab8f81650710 100644
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -690,6 +690,14 @@ static void target_fabric_port_unlink(
}
core_dev_del_lun(se_tpg, lun);
+
+ if (tf->tf_ops->fabric_post_unlink) {
+ /*
+ * Allow fabrics to release state that must remain valid until
+ * core_dev_del_lun() has drained all active LUN references.
+ */
+ tf->tf_ops->fabric_post_unlink(se_tpg, lun);
+ }
}
static void target_fabric_port_release(struct config_item *item)
diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c
index b3fa5a17fd2d..98414e7611c0 100644
--- a/drivers/usb/gadget/function/f_tcm.c
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -2024,7 +2024,7 @@ static const struct target_core_fabric_ops usbg_ops = {
.fabric_enable_tpg = usbg_enable_tpg,
.fabric_drop_tpg = usbg_drop_tpg,
.fabric_post_link = usbg_port_link,
- .fabric_pre_unlink = usbg_port_unlink,
+ .fabric_post_unlink = usbg_port_unlink,
.fabric_init_nodeacl = usbg_init_nodeacl,
.tfc_wwn_attrs = usbg_wwn_attrs,
diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h
index e9039e73d058..390ace5bb252 100644
--- a/include/target/target_core_fabric.h
+++ b/include/target/target_core_fabric.h
@@ -95,6 +95,8 @@ struct target_core_fabric_ops {
struct se_lun *);
void (*fabric_pre_unlink)(struct se_portal_group *,
struct se_lun *);
+ void (*fabric_post_unlink)(struct se_portal_group *se_tpg,
+ struct se_lun *lun);
struct se_tpg_np *(*fabric_make_np)(struct se_portal_group *,
struct config_group *, const char *);
void (*fabric_drop_np)(struct se_tpg_np *);
--
2.43.0
next reply other threads:[~2026-08-07 6:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-07 6:07 Shuangpeng Bai [this message]
2026-08-07 6:43 ` [PATCH] usb: gadget: f_tcm: keep port count until LUN teardown completes sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260807060733.3186624-1-shuangpeng.kernel@gmail.com \
--to=shuangpeng.kernel@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stable@vger.kernel.org \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.