From: Baoquan He <baoquan.he@linux.dev>
To: linux-mm@kvack.org
Cc: akpm@linux-foundation.org, kasong@tencent.com, baohua@kernel.org,
qi.zheng@linux.dev, shakeel.butt@linux.dev,
axelrasmussen@google.com, yuanchu@google.com, weixugc@google.com,
Baoquan He <baoquan.he@linux.dev>
Subject: [PATCH 3/4] mm/mglru: add debugfs knob to control cross-node empty walk skip threshold
Date: Fri, 7 Aug 2026 17:23:40 +0800 [thread overview]
Message-ID: <20260807092343.4123734-3-baoquan.he@linux.dev> (raw)
In-Reply-To: <20260807092343.4123734-1-baoquan.he@linux.dev>
Convert the hardcoded MGLRU_EMPTY_SKIP_GENS from a #define to a
runtime-tunable variable (mglru_empty_skip_gens, default 4), and
add a debugfs command to control it:
echo "skip_empty <N>" > /sys/kernel/debug/lru_gen (0 = disable, default 4)
echo "skip_empty" > /sys/kernel/debug/lru_gen (show current value)
Setting N=0 disables the cross-node empty walk suppression entirely,
allowing easy A/B testing without recompiling the kernel.
Default 4 matches MAX_NR_GENS so the skip window covers at most
one full LRU generation slide.
This is intended as a development/tuning aid for RFC. Whether it
should graduate to a permanent ABI (sysctl) can be decided once
field data demonstrates the optimization is worth keeping.
Signed-off-by: Baoquan He <baoquan.he@linux.dev>
---
mm/vmscan.c | 41 ++++++++++++++++++++++++++++++++---------
1 file changed, 32 insertions(+), 9 deletions(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index c39b392d7b7e..631bcd89b196 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2709,14 +2709,6 @@ static bool should_clear_pmd_young(void)
return arch_has_hw_nonleaf_pmd_young() && get_cap(LRU_GEN_NONLEAF_YOUNG);
}
-/*
- * Cross-node empty walk suppression. lru_gen_use_mm() marks an mm used on all
- * nodes, so aging on a node where the mm has no memory wastes a full page table
- * walk. Skip such an mm for up to MGLRU_EMPTY_SKIP_GENS generations after an
- * empty walk, then force-rescan to close migration/mlock/NUMA-balancing windows.
- */
-#define MGLRU_EMPTY_SKIP_GENS 4
-
/******************************************************************************
* shorthand helpers
******************************************************************************/
@@ -2927,6 +2919,9 @@ static struct lru_gen_mm_state *get_mm_state(struct lruvec *lruvec)
return &lruvec->mm_state;
}
+/* tunable empty-walk skip threshold; defined later, get_next_mm() needs it */
+static unsigned long mglru_empty_skip_gens;
+
static struct mm_struct *get_next_mm(struct lru_gen_mm_walk *walk)
{
int key;
@@ -2951,7 +2946,7 @@ static struct mm_struct *get_next_mm(struct lru_gen_mm_walk *walk)
DEFINE_MAX_SEQ(walk->lruvec);
unsigned long empty_seq = READ_ONCE(mm->lru_gen.empty_map_seq);
- if (max_seq < empty_seq + MGLRU_EMPTY_SKIP_GENS)
+ if (max_seq < empty_seq + READ_ONCE(mglru_empty_skip_gens))
return NULL; /* skip: < K gens since empty */
/* K generations passed â force rescan */
@@ -4273,6 +4268,15 @@ static bool lruvec_is_reclaimable(struct lruvec *lruvec, struct scan_control *sc
/* to protect the working set of the last N jiffies */
static unsigned long lru_gen_min_ttl __read_mostly;
+/*
+ * Cross-node empty-walk skip threshold: skip an mm on node N for up to
+ * @mglru_empty_skip_gens generations after an empty walk, then force-rescan
+ * (closes migration/mlock/NUMA-balancing windows). Default 4 matches
+ * MAX_NR_GENS; 0 disables the suppression. Tunable via:
+ * echo "skip_empty <N>" > /sys/kernel/debug/lru_gen
+ */
+static unsigned long mglru_empty_skip_gens __read_mostly = 4;
+
static void lru_gen_age_node(struct pglist_data *pgdat, struct scan_control *sc)
{
struct mem_cgroup *memcg;
@@ -5870,6 +5874,25 @@ static ssize_t lru_gen_seq_write(struct file *file, const char __user *src,
if (!*cur)
continue;
+ /*
+ * set/show the empty-walk skip threshold: "skip_empty <N>"
+ */
+ if (!strncmp(cur, "skip_empty", 10)) {
+ cur += 10;
+ cur = skip_spaces(cur);
+ if (*cur) {
+ unsigned long val;
+
+ if (sscanf(cur, "%lu", &val) == 1)
+ WRITE_ONCE(mglru_empty_skip_gens, val);
+ } else {
+ pr_info("MGLRU empty skip threshold: %lu generations (0=disabled)\n",
+ READ_ONCE(mglru_empty_skip_gens));
+ }
+ err = 0;
+ continue;
+ }
+
n = sscanf(cur, "%c %llu %u %lu %n %4s %n %lu %n", &cmd, &memcg_id, &nid,
&seq, &end, swap_string, &end, &opt, &end);
if (n < 4 || cur[end]) {
--
2.54.0
next prev parent reply other threads:[~2026-08-07 9:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 10:29 [RFC PATCH 0/6] mm/mglru: skip empty PUD subtrees during aging with PUD-level Bloom filter Baoquan He
2026-08-06 10:29 ` [RFC PATCH 1/6] mm/mglru: add PUD-level Bloom filter state Baoquan He
2026-08-06 10:29 ` [RFC PATCH 2/6] mm/mglru: refactor Bloom filter helpers for two filter levels Baoquan He
2026-08-06 10:29 ` [RFC PATCH 3/6] mm/mglru: skip empty PUD subtrees during aging Baoquan He
2026-08-06 10:29 ` [RFC PATCH 4/6] mm/mglru: report hot PUDs from the rmap feedback path Baoquan He
2026-08-06 10:29 ` [RFC PATCH 5/6] mm/mglru: add MM_WALK_EMPTY stats and tracepoint for cross-node measurement Baoquan He
2026-08-06 11:05 ` [RFC PATCH 0/6] mm/mglru: skip empty PUD subtrees during aging with PUD-level Bloom filter Baoquan He
2026-08-07 9:23 ` [PATCH 1/4] mm/mglru: add MM_WALK_EMPTY stats and tracepoint for cross-node measurement Baoquan He
2026-08-07 9:23 ` [PATCH 2/4] mm/mglru: suppress cross-node empty page table walks Baoquan He
2026-08-07 9:23 ` Baoquan He [this message]
2026-08-07 9:23 ` [PATCH 4/4] mm/mglru: invalidate empty-walk skip on page fault and migration Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260807092343.4123734-3-baoquan.he@linux.dev \
--to=baoquan.he@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=axelrasmussen@google.com \
--cc=baohua@kernel.org \
--cc=kasong@tencent.com \
--cc=linux-mm@kvack.org \
--cc=qi.zheng@linux.dev \
--cc=shakeel.butt@linux.dev \
--cc=weixugc@google.com \
--cc=yuanchu@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.