All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Shiyan <eagle.alexander923@gmail.com>
To: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Hans Verkuil <hverkuil+cisco@kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Alexander Shiyan <eagle.alexander923@gmail.com>
Subject: [PATCH v2 1/2] dt-bindings: media: i2c: Add onsemi AR0234 image sensor binding
Date: Fri,  7 Aug 2026 13:28:46 +0300	[thread overview]
Message-ID: <20260807102847.1813059-2-eagle.alexander923@gmail.com> (raw)
In-Reply-To: <20260807102847.1813059-1-eagle.alexander923@gmail.com>

Add devicetree binding for the onsemi AR0234 CMOS image sensor.

Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
---
 .../bindings/media/i2c/onnn,ar0234.yaml       | 126 ++++++++++++++++++
 1 file changed, 126 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,ar0234.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,ar0234.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,ar0234.yaml
new file mode 100644
index 000000000000..d6db435be9e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,ar0234.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,ar0234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor AR0234 1/2.6-inch CMOS Digital Image Sensor
+
+maintainers:
+  - Alexander Shiyan <eagle.alexander923@gmail.com>
+
+description:
+  The AR0234 is a 1/2.6-inch CMOS digital image sensor with a pixel
+  array of 1940x1220 pixels, capable of 1920x1200 resolution at up
+  to 120 fps. It supports MIPI CSI-2 output with 2 or 4 data lanes,
+  color raw Bayer (8/10-bit) or monochrome output.
+
+properties:
+  compatible:
+    oneOf:
+      - const: onnn,ar0234cs
+      - items:
+          - enum: ["onnn,ar0234cssc", "onnn,ar0234cssm"]
+          - const: onnn,ar0234cs
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    description: Reference clock (external clock) input
+    maxItems: 1
+
+  reset-gpios:
+    description: Reset pin, usually active low (if needed)
+    maxItems: 1
+
+  vaa-supply:
+    description: Analog (2.8V) supply regulator
+
+  vdd-supply:
+    description: Digital Core (1.2V) supply regulator
+
+  vddio-supply:
+    description: I/O (1.8V-2.8V) supply regulator
+
+  orientation: true
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: CSI-2 transmitter port
+    additionalProperties: false
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+        properties:
+          data-lanes:
+            description: Number of MIPI CSI-2 data lanes
+            oneOf:
+              - items:
+                  enum: [1, 2]
+                minItems: 2
+                maxItems: 2
+              - items:
+                  enum: [1, 2, 3, 4]
+                minItems: 4
+                maxItems: 4
+
+          link-frequencies:
+            description:
+              Allowed MIPI link frequencies in Hz. Two frequencies must
+              be provided, one for 8-bit mode and another for 10-bit mode.
+              Each frequency shall be within the sensor valid operating
+              range.
+            minItems: 2
+            maxItems: 2
+            items:
+              minimum: 360000000
+              maximum: 450000000
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@18 {
+            compatible = "onnn,ar0234cssc", "onnn,ar0234cs";
+            reg = <0x18>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_cam>;
+            clocks = <&clk27m>;
+            vaa-supply = <&reg_cam_vaa>;
+            vdd-supply = <&reg_cam_vdd>;
+            vddio-supply = <&reg_cam_vddio>;
+            reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+
+            port {
+                ar0234_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <360000000 450000000>;
+                    remote-endpoint = <&ar0234_in>;
+                };
+            };
+        };
+    };
+...
-- 
2.52.0


  reply	other threads:[~2026-08-07 10:29 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-07 10:28 [PATCH v2 0/2] media: i2c: Add onsemi AR0234 camera sensor driver Alexander Shiyan
2026-08-07 10:28 ` Alexander Shiyan [this message]
2026-08-07 10:36   ` [PATCH v2 1/2] dt-bindings: media: i2c: Add onsemi AR0234 image sensor binding sashiko-bot
2026-08-07 10:28 ` [PATCH v2 2/2] media: i2c: Add onsemi AR0234 image sensor driver Alexander Shiyan
2026-08-07 10:47   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260807102847.1813059-2-eagle.alexander923@gmail.com \
    --to=eagle.alexander923@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil+cisco@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.