From: kernel test robot <lkp@intel.com>
To: "Bryan B. Lima" <bblima@usp.br>
Cc: oe-kbuild-all@lists.linux.dev,
Daniel Lezcano <daniel.lezcano@kernel.org>,
"Gustavo S. Correa" <gustavoscorrea@usp.br>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [thermal:thermal/linux-next 2/26] drivers/thermal/armada_thermal.c:137:9: error: implicit declaration of function 'FIELD_MODIFY'
Date: Sat, 08 Aug 2026 07:00:46 +0800 [thread overview]
Message-ID: <202608080649.pJYD31yg-lkp@intel.com> (raw)
tree: https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git thermal/linux-next
head: 55c16e15ff9f91bc994a20124b83faf27f0e3690
commit: cbe31d5ce49873a2a5a3ca5decb4935672396e77 [2/26] thermal/drivers/armada: Use bitfield and bitmask macros
config: powerpc-allmodconfig (https://download.01.org/0day-ci/archive/20260808/202608080649.pJYD31yg-lkp@intel.com/config)
compiler: powerpc64-linux-gcc (GCC) 16.1.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260808/202608080649.pJYD31yg-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202608080649.pJYD31yg-lkp@intel.com/
All errors (new ones prefixed by >>):
drivers/thermal/armada_thermal.c: In function 'armadaxp_init':
>> drivers/thermal/armada_thermal.c:137:9: error: implicit declaration of function 'FIELD_MODIFY' [-Wimplicit-function-declaration]
137 | FIELD_MODIFY(PMU_TDC0_OTF_CAL_MASK, ®, 1);
| ^~~~~~~~~~~~
drivers/thermal/armada_thermal.c: In function 'armada_ap80x_init':
>> drivers/thermal/armada_thermal.c:43:41: error: implicit declaration of function 'FIELD_MAX' [-Wimplicit-function-declaration]
43 | #define CONTROL0_TSEN_OSR_MAX FIELD_MAX(CONTROL0_TSEN_OSR_MASK)
| ^~~~~~~~~
drivers/thermal/armada_thermal.c:236:52: note: in expansion of macro 'CONTROL0_TSEN_OSR_MAX'
236 | FIELD_MODIFY(CONTROL0_TSEN_OSR_MASK, ®, CONTROL0_TSEN_OSR_MAX);
| ^~~~~~~~~~~~~~~~~~~~~
vim +/FIELD_MODIFY +137 drivers/thermal/armada_thermal.c
36
37 #define CONTROL0_TSEN_START BIT(0)
38 #define CONTROL0_TSEN_RESET BIT(1)
39 #define CONTROL0_TSEN_ENABLE BIT(2)
40 #define CONTROL0_TSEN_AVG_BYPASS BIT(6)
41 #define CONTROL0_TSEN_CHAN_MASK GENMASK(16, 13)
42 #define CONTROL0_TSEN_OSR_MASK GENMASK(25, 24)
> 43 #define CONTROL0_TSEN_OSR_MAX FIELD_MAX(CONTROL0_TSEN_OSR_MASK)
44 #define CONTROL0_TSEN_MODE_MASK GENMASK(31, 30)
45 #define CONTROL0_TSEN_MODE_EXTERNAL 0x2
46
47 #define CONTROL1_TSEN_AVG_MASK GENMASK(2, 0)
48 #define CONTROL1_EXT_TSEN_SW_RESET BIT(7)
49 #define CONTROL1_EXT_TSEN_HW_RESETn BIT(8)
50 #define CONTROL1_TSEN_INT_EN BIT(25)
51 #define CONTROL1_TSEN_SELECT_MASK GENMASK(22, 21)
52
53 #define STATUS_POLL_PERIOD_US 1000
54 #define STATUS_POLL_TIMEOUT_US 100000
55 #define OVERHEAT_INT_POLL_DELAY_MS 1000
56
57 struct armada_thermal_data;
58
59 /* Marvell EBU Thermal Sensor Dev Structure */
60 struct armada_thermal_priv {
61 struct device *dev;
62 struct regmap *syscon;
63 char zone_name[THERMAL_NAME_LENGTH];
64 /* serialize temperature reads/updates */
65 struct mutex update_lock;
66 struct armada_thermal_data *data;
67 struct thermal_zone_device *overheat_sensor;
68 int interrupt_source;
69 int current_channel;
70 long current_threshold;
71 long current_hysteresis;
72 };
73
74 struct armada_thermal_data {
75 /* Initialize the thermal IC */
76 void (*init)(struct platform_device *pdev,
77 struct armada_thermal_priv *priv);
78
79 /* Formula coeficients: temp = (b - m * reg) / div */
80 s64 coef_b;
81 s64 coef_m;
82 u32 coef_div;
83 bool inverted;
84 bool signed_sample;
85
86 /* Register shift and mask to access the sensor temperature */
87 unsigned int temp_shift;
88 unsigned int temp_mask;
89 unsigned int thresh_shift;
90 unsigned int hyst_shift;
91 unsigned int hyst_mask;
92 u32 is_valid_bit;
93
94 /* Syscon access */
95 unsigned int syscon_control0_off;
96 unsigned int syscon_control1_off;
97 unsigned int syscon_status_off;
98 unsigned int dfx_irq_cause_off;
99 unsigned int dfx_irq_mask_off;
100 unsigned int dfx_overheat_irq;
101 unsigned int dfx_server_irq_mask_off;
102 unsigned int dfx_server_irq_en;
103
104 /* One sensor is in the thermal IC, the others are in the CPUs if any */
105 unsigned int cpu_nr;
106 };
107
108 struct armada_drvdata {
109 enum drvtype {
110 LEGACY,
111 SYSCON
112 } type;
113 union {
114 struct armada_thermal_priv *priv;
115 struct thermal_zone_device *tz;
116 } data;
117 };
118
119 /*
120 * struct armada_thermal_sensor - hold the information of one thermal sensor
121 * @thermal: pointer to the local private structure
122 * @tzd: pointer to the thermal zone device
123 * @id: identifier of the thermal sensor
124 */
125 struct armada_thermal_sensor {
126 struct armada_thermal_priv *priv;
127 int id;
128 };
129
130 static void armadaxp_init(struct platform_device *pdev,
131 struct armada_thermal_priv *priv)
132 {
133 struct armada_thermal_data *data = priv->data;
134 u32 reg;
135
136 regmap_read(priv->syscon, data->syscon_control1_off, ®);
> 137 FIELD_MODIFY(PMU_TDC0_OTF_CAL_MASK, ®, 1);
138
139 /* Reference calibration value */
140 FIELD_MODIFY(PMU_TDC0_REF_CAL_CNT_MASK, ®, 0xf1);
141
142 /* Reset the sensor */
143 FIELD_MODIFY(PMU_TDC0_SW_RST_MASK, ®, 1);
144 regmap_write(priv->syscon, data->syscon_control1_off, reg);
145
146 FIELD_MODIFY(PMU_TDC0_SW_RST_MASK, ®, 0);
147 regmap_write(priv->syscon, data->syscon_control1_off, reg);
148
149 /* Enable the sensor */
150 regmap_read(priv->syscon, data->syscon_status_off, ®);
151 FIELD_MODIFY(PMU_TM_DISABLE_MASK, ®, 0);
152 regmap_write(priv->syscon, data->syscon_status_off, reg);
153 }
154
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2026-08-07 23:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202608080649.pJYD31yg-lkp@intel.com \
--to=lkp@intel.com \
--cc=bblima@usp.br \
--cc=daniel.lezcano@kernel.org \
--cc=gustavoscorrea@usp.br \
--cc=miquel.raynal@bootlin.com \
--cc=oe-kbuild-all@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.