From: Adam Skladowski <a39.skl@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Kees Cook <kees@kernel.org>,
Tony Luck <tony.luck@intel.com>,
"Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org,
Adam Skladowski <a39.skl@gmail.com>
Subject: [PATCH 5/7] arm64: dts: qcom: Add LeEco Le2
Date: Mon, 10 Aug 2026 18:55:38 +0200 [thread overview]
Message-ID: <20260810-next-patches-v1-5-79a779d76173@gmail.com> (raw)
In-Reply-To: <20260810-next-patches-v1-0-79a779d76173@gmail.com>
Add a devicetree for the LeEco Le2 smartphone, which is based
on the Eldarion/MSM8976 SoC.
Supported functionality as of this initial submission:
* I2C peripherals (Touchscreen,Audio amp, Haptics, Extcon, Led)
* Power Button, Volume Keys
* Regulators (PM8950)
* WLED (PMI8950)
* Remoteprocs (WCNSS)
* GPU
Device tree also contains supply maps to other subsystems like MDSS
but due to missing dependencies like panel those are disabled.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/msm8976-leeco-s2.dts | 444 ++++++++++++++++++++++++++
2 files changed, 445 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 11e953657691..1487f2beff3d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -128,6 +128,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-vince.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8976-leeco-s2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8976-longcheer-l9360.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8976-leeco-s2.dts b/arch/arm64/boot/dts/qcom/msm8976-leeco-s2.dts
new file mode 100644
index 000000000000..4a11ea66efde
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8976-leeco-s2.dts
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2026 Adam Skladowski <a39skl@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8976.dtsi"
+#include "pm8950.dtsi"
+#include "pm8004.dtsi"
+#include "pmi8950.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/ti-drv260x.h>
+
+/ {
+ model = "Leeco Le S2";
+ compatible = "leeco,s2", "qcom,msm8976";
+ chassis-type = "handset";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_key_default>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ reserved-memory {
+
+ ramoops {
+ compatible = "ramoops";
+ no-map;
+ reg = <0 0x9ff00000 0 0x100000>;
+ record-size = <0x10000>;
+ console-size = <0x60000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x20000>;
+ ecc-size = <16>;
+ };
+
+ /delete-node/ memory@83000000;
+
+ cont_splash_mem: memory@82000000 {
+ reg = <0x0 0x82000000 0x0 0x2800000>;
+ };
+
+ /delete-node/ ext-region@85b00000;
+ ext_region: memory@84a00000 {
+ reg = <0x0 0x84a00000 0x0 0x1900000>;
+ no-map;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&adreno_gpu {
+ status = "okay";
+};
+
+&blsp1_i2c4 {
+ status = "okay";
+
+ rmi4-i2c-dev@4b {
+ reg = <0x4b>;
+ compatible = "syna,rmi4-i2c";
+ interrupts-extended = <&tlmm 65 0x2008>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&pm8950_l17>;
+ vio-supply = <&pm8950_l6>;
+
+ syna,reset-delay-ms = <100>;
+ syna,startup-delay-ms = <500>;
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ syna,clip-x-low = <0>;
+ syna,clip-x-high = <1080>;
+ syna,clip-y-low = <0>;
+ syna,clip-y-high = <1920>;
+ };
+ };
+};
+
+&blsp2_i2c2 {
+ status = "okay";
+
+ haptics: haptics@5a {
+ compatible = "ti,drv2604";
+ reg = <0x5a>;
+ enable-gpios = <&tlmm 109 GPIO_ACTIVE_HIGH>;
+ mode = <DRV260X_LRA_MODE>;
+ library-sel = <DRV260X_LIB_LRA>;
+ };
+
+ tiusb320: tusb320@47 {
+ compatible = "ti,tusb320";
+ reg = <0x47>;
+ interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&blsp2_i2c4 {
+ status = "okay";
+ led-controller@45 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "awinic,aw2013";
+ reg = <0x45>;
+ vcc-supply = <&pm8950_l10>;
+
+ led@0 {
+ reg = <0>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ };
+ led@1 {
+ reg = <1>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led@2 {
+ reg = <2>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
+ speaker_codec: audio-codec@34 {
+ compatible = "nxp,tfa9890";
+ reg = <0x34>;
+ vddd-supply = <&pm8950_l5>;
+ sound-name-prefix = "Speaker";
+ #sound-dai-cells = <0>;
+ };
+};
+
+&gcc {
+ vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&mdss_dsi0 {
+ vdd-supply = <&pm8950_l17>;
+ vdda-supply = <&pm8950_l1>;
+ vddio-supply = <&pm8950_l6>;
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vddio-supply = <&pm8950_l6>;
+};
+
+&otg {
+ status = "okay";
+ extcon = <&tiusb320>,<0>;
+};
+
+&pm8004_lsid5 {
+ status = "okay";
+};
+
+&pm8004_spmi_regulators {
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ status = "okay";
+
+ /* Cluster 1 supply */
+ pm8004_s2: s2 {
+ regulator-name = "VDD_APC1";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1165000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8004_s5: s5 {
+ regulator-name = "VDD_GFX";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1165000>;
+ regulator-enable-ramp-delay = <500>;
+ regulator-always-on;
+ };
+};
+
+&pm8950_spmi_regulators {
+ vdd_s5-supply = <&vph_pwr>;
+
+ /* Cluster 0 supply */
+ pm8950_spmi_s5: s5 {
+
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1165000>;
+ regulator-name = "VDD_APC0";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&pmi8950_wled {
+ qcom,current-limit-microamp = <20000>;
+ qcom,enabled-strings = <0 1>;
+ qcom,ovp-millivolt = <29600>;
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8950-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_l1_l19-supply = <&pm8950_s3>;
+ vdd_l2_l23-supply = <&pm8950_s3>;
+ vdd_l3-supply = <&pm8950_s3>;
+ vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+ vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+ pm8950_s3: s3 {
+ regulator-min-microvolt = <1325000>;
+ regulator-max-microvolt = <1325000>;
+ };
+
+ pm8950_s4: s4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8950_l1: l1 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8950_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8950_l3: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ pm8950_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ pm8950_l8: l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8950_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8950_l10: l10 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8950_l11: l11 {
+ regulator-always-on;
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8950_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8950_l13: l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8950_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8950_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8950_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l17: l17 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8950_l19: l19 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8950_l22: l22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8950_l23: l23 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8950_l8>;
+ vqmmc-supply = <&pm8950_l5>;
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <8 4>;
+
+ disp_reset_n_active: disp-reset-n-active-state {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ disp_reset_n_sleep: disp-reset-n-sleep-state {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ disp_te_default: disp-te-default-state {
+ pins = "gpio24";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ gpio_key_default: gpio-key-default-state {
+ pins = "gpio113";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ ts_int_default: ts-int-state {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_int_sleep: ts-int-sleep-state {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ ts_reset_active: ts-reset-active-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_reset_suspend: ts-reset-suspend-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+&wcnss {
+ vddpx-supply = <&pm8950_l5>;
+
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3680";
+
+ vddxo-supply = <&pm8950_l7>;
+ vddrfa-supply = <&pm8950_l19>;
+ vddpa-supply = <&pm8950_l9>;
+ vdddig-supply = <&pm8950_l5>;
+};
+
+&xo_board {
+ clock-frequency = <19200000>;
+};
+
--
2.55.0
next prev parent reply other threads:[~2026-08-10 16:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-10 16:55 [PATCH 0/7] arm64: dts: qcom: Add 3 new devices Adam Skladowski
2026-08-10 16:55 ` [PATCH 1/7] dt-bindings: vendor-prefixes: Add LeEco Adam Skladowski
2026-08-10 16:55 ` [PATCH 2/7] dt-bindings: arm: qcom: Document Motorola Moto One Adam Skladowski
2026-08-10 16:55 ` [PATCH 3/7] arm64: dts: qcom: Add Motorola One Adam Skladowski
2026-08-10 17:29 ` sashiko-bot
2026-08-10 16:55 ` [PATCH 4/7] dt-bindings: arm: qcom: Document LeEco Le2 Adam Skladowski
2026-08-10 16:55 ` Adam Skladowski [this message]
2026-08-10 17:49 ` [PATCH 5/7] arm64: dts: qcom: Add " sashiko-bot
2026-08-10 16:55 ` [PATCH 6/7] dt-bindings: arm: qcom: Document Xiaomi Redmi 9T Adam Skladowski
2026-08-10 16:55 ` [PATCH 7/7] arm64: dts: qcom: Add " Adam Skladowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260810-next-patches-v1-5-79a779d76173@gmail.com \
--to=a39.skl@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gpiccoli@igalia.com \
--cc=kees@kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.