From: Christoph Schlameuss <schlameuss@linux.ibm.com>
To: kvm@vger.kernel.org, linux-s390@vger.kernel.org
Cc: Alexander Gordeev <agordeev@linux.ibm.com>,
Christian Borntraeger <borntraeger@linux.ibm.com>,
Claudio Imbrenda <imbrenda@linux.ibm.com>,
David Hildenbrand <david@kernel.org>,
Eric Farman <farman@linux.ibm.com>,
Heiko Carstens <hca@linux.ibm.com>,
Janosch Frank <frankja@linux.ibm.com>,
Nico Boehr <nrb@linux.ibm.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Shuah Khan <shuah@kernel.org>,
Sven Schnelle <svens@linux.ibm.com>,
Vasily Gorbik <gor@linux.ibm.com>,
Christoph Schlameuss <schlameuss@linux.ibm.com>
Subject: [PATCH v2 19/20] KVM: s390: vsie: Create minimal scb shadows for not running g3 blocks
Date: Mon, 10 Aug 2026 17:54:07 +0200 [thread overview]
Message-ID: <20260810-vsie-sigpi-v2-19-e8d59a2f2f70@linux.ibm.com> (raw)
In-Reply-To: <20260810-vsie-sigpi-v2-0-e8d59a2f2f70@linux.ibm.com>
Instead of creating a full shadow for vSIE control blocks only create a
minimal shadow for SIGP purposes for currently not running guest-3
control blocks. This reduces the overhead to shadow the whole guest-3
configuration.
The minimal shadow only contains the information needed for SIGPI and
SRSI. The shadow will still be recreated fully when a vSIE is entered
with that SCB later.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
---
arch/s390/kvm/vsie.c | 54 +++++++++++++++++++++++++++++++++++-----------------
1 file changed, 37 insertions(+), 17 deletions(-)
diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index 8640435c9d5f..1184527dea48 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -364,8 +364,7 @@ static void update_intervention_requests(struct vsie_page *vsie_page)
static int prepare_cpuflags(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
{
struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
- struct kvm_s390_sie_block *scb_o = vsie_page->scb_o;
- int newflags, cpuflags = atomic_read(&scb_o->cpuflags);
+ int newflags, cpuflags = atomic_read(&vsie_page->scb_o->cpuflags);
/* we don't allow ESA/390 guests unless explicitly enabled */
if (!(cpuflags & CPUSTAT_ZARCH) && !vcpu->kvm->arch.allow_vsie_esamode)
@@ -708,6 +707,39 @@ static void unshadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
scb_o->ihcpu = scb_s->ihcpu;
}
+static int shadow_scb_minimal(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
+{
+ struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
+ struct kvm_s390_sie_block *scb_o = vsie_page->scb_o;
+ int rc;
+
+ /* make sure we don't have any leftovers when reusing the scb */
+ scb_s->icptcode = 0;
+ scb_s->eca = 0;
+ scb_s->ecb = 0;
+ scb_s->ecb2 = 0;
+ scb_s->ecb3 = 0;
+ scb_s->ecd = 0;
+ scb_s->fac = 0;
+ scb_s->fpf = 0;
+
+ rc = prepare_cpuflags(vcpu, vsie_page);
+ if (rc)
+ return rc;
+
+ scb_s->icpua = scb_o->icpua;
+ scb_s->ecb2 |= scb_o->ecb2 & ECB2_ESCA;
+
+ if (vsie_page->vsie_sca) {
+ scb_s->eca |= scb_o->eca & ECA_SIGPI;
+ scb_s->ecb |= scb_o->ecb & ECB_SRSI;
+ write_scao(scb_s, virt_to_phys(&vsie_page->vsie_sca->ssca));
+ scb_s->osda = virt_to_phys(scb_o);
+ }
+
+ return 0;
+}
+
/*
* Setup the shadow scb by copying and checking the relevant parts of the g2
* provided scb.
@@ -727,17 +759,7 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
unsigned long new_mso = 0;
int rc;
- /* make sure we don't have any leftovers when reusing the scb */
- scb_s->icptcode = 0;
- scb_s->eca = 0;
- scb_s->ecb = 0;
- scb_s->ecb2 = 0;
- scb_s->ecb3 = 0;
- scb_s->ecd = 0;
- scb_s->fac = 0;
- scb_s->fpf = 0;
-
- rc = prepare_cpuflags(vcpu, vsie_page);
+ rc = shadow_scb_minimal(vcpu, vsie_page);
if (rc)
goto out;
@@ -767,8 +789,6 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
if (!(atomic_read(&scb_s->cpuflags) & CPUSTAT_KSS))
scb_s->ictl |= ICTL_ISKE | ICTL_SSKE | ICTL_RRBE;
- scb_s->icpua = scb_o->icpua;
-
if (!(atomic_read(&scb_s->cpuflags) & CPUSTAT_ZARCH))
new_prefix &= GUEST_PREFIX_MASK_ESA;
else
@@ -2137,7 +2157,7 @@ static int _shadow_sca(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page,
__set_bit(VSIE_SCA_ESCA, &vsie_sca->flags);
sca_mcn_copy(vsie_sca, phys_to_virt(sca_o_hpa(vsie_sca)));
- /* pin and make shadow for ALL scb in the sca */
+ /* pin and make minimal shadow for ALL scb in the sca */
cpu_slots = is_esca ? KVM_S390_MAX_VSIE_VCPUS : KVM_S390_BSCA_CPU_SLOTS;
for_each_set_bit_inv(cpu_nr, (unsigned long *)&vsie_sca->mcn, cpu_slots) {
rc = get_sca_entry_addr(vcpu->kvm, vsie_sca, cpu_nr, NULL, &sca_o_entry_hpa);
@@ -2163,7 +2183,7 @@ static int _shadow_sca(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page,
rc = PTR_ERR(vsie_page_n);
if (rc)
goto err;
- rc = shadow_scb(vcpu, vsie_page_n);
+ rc = shadow_scb_minimal(vcpu, vsie_page_n);
vsie_sca_update(vsie_sca, cpu_nr, vsie_page_n, sca_o_entry_hpa);
put_vsie_page(vsie_page_n);
if (rc)
--
2.55.0
next prev parent reply other threads:[~2026-08-10 15:54 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-10 15:53 [PATCH v2 00/20] KVM: s390: vsie: Add VSIE SIGP ECALL and SRSI Interpretation Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 01/20] KVM: s390: vsie: Add SCAO read and write helpers Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 02/20] KVM: s390: vsie: Move SCAO validation into a function Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 03/20] KVM: s390: vsie: Add vsie_interp_extf detection Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 04/20] KVM: s390: vsie: Add ssca_block and ssca_entry structs Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 05/20] KVM: s390: vsie: Move pin/unpin_scb methods Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 06/20] KVM: s390: vsie: Move pin/unpin guest page Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 07/20] KVM: s390: vsie: Move release/acquire gmap shadow Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 08/20] KVM: s390: vsie: Create helpers to alloc and free vsie_pages Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 09/20] KVM: s390: vsie: Replace radix_tree with xarray addr_to_page Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 10/20] KVM: s390: vsie: Add helper to release gmap shadow Christoph Schlameuss
2026-08-10 15:53 ` [PATCH v2 11/20] KVM: s390: vsie: Lazily keep original scb pinned after vsie exit Christoph Schlameuss
2026-08-10 15:54 ` [PATCH v2 12/20] KVM: s390: vsie: Add helper to pin and unpin multiple guest pages Christoph Schlameuss
2026-08-10 15:54 ` [PATCH v2 13/20] KVM: s390: vsie: Add struct vsie_sca with pin and unpin methods Christoph Schlameuss
2026-08-10 15:54 ` [PATCH v2 14/20] KVM: s390: vsie: Shadow VSIE SCA in guest-1 Christoph Schlameuss
2026-08-10 15:54 ` [PATCH v2 15/20] KVM: s390: vsie: Guard against invalid CPU address Christoph Schlameuss
2026-08-10 15:54 ` [PATCH v2 16/20] KVM: s390: vsie: Allow guest-3 cpu add and remove with ssca Christoph Schlameuss
2026-08-10 15:54 ` [PATCH v2 17/20] KVM: s390: vsie: Add VSIE max shadow configuration Christoph Schlameuss
2026-08-10 15:54 ` [PATCH v2 18/20] KVM: s390: vsie: Add VSIE shadow stat counters Christoph Schlameuss
2026-08-10 15:54 ` Christoph Schlameuss [this message]
2026-08-10 15:54 ` [PATCH v2 20/20] KVM: s390: vsie: Enable use of VSIE SSCA Christoph Schlameuss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260810-vsie-sigpi-v2-19-e8d59a2f2f70@linux.ibm.com \
--to=schlameuss@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=david@kernel.org \
--cc=farman@linux.ibm.com \
--cc=frankja@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=nrb@linux.ibm.com \
--cc=pbonzini@redhat.com \
--cc=shuah@kernel.org \
--cc=svens@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.