From: Cong Nguyen <congnt264@gmail.com>
To: Maxime Ripard <mripard@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
linux-media@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/3] media: sun4i-csi: disable interrupts when stopping streaming
Date: Mon, 10 Aug 2026 13:25:20 +0700 [thread overview]
Message-ID: <20260810062521.1709379-3-congnt264@gmail.com> (raw)
In-Reply-To: <20260810062521.1709379-1-congnt264@gmail.com>
sun4i_csi_start_streaming() enables the frame-done interrupt in
CSI_INT_EN_REG, but sun4i_csi_stop_streaming() only stops the capture
engine (CSI_CPT_CTRL_REG) via sun4i_csi_capture_stop(). It never disables
the interrupt source nor synchronizes with the handler.
Capture stops at the end of the current frame, so a frame-done interrupt
can still fire shortly after stop_streaming() returns. If userspace then
closes the device, sun4i_csi_release() calls pm_runtime_put() and the CSI
block is powered down (clocks gated, reset asserted). A delayed interrupt
handler would then read/write CSI registers on the gated block, which can
hang or crash the system.
Add a helper that clears CSI_INT_EN_REG, reads it back to flush the posted
write, and calls synchronize_irq(), so no handler can run past that point.
Call it from stop_streaming() before returning the active buffers and
freeing the scratch buffer.
The start_streaming() error path (err_disable_device) has the same
problem: the frame-done interrupt is enabled and capture is started
before the s_stream call that can fail, so a handler can run while the
error path frees the scratch buffer and returns the queued buffers.
Apply the same teardown there. Store the IRQ number in struct sun4i_csi
so it is available in both paths.
Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
---
.../platform/sunxi/sun4i-csi/sun4i_csi.h | 1 +
.../platform/sunxi/sun4i-csi/sun4i_dma.c | 20 +++++++++++++++++++
2 files changed, 21 insertions(+)
diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.h b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.h
index 4e0c2df45d4d..51173faea871 100644
--- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.h
+++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.h
@@ -112,6 +112,7 @@ struct sun4i_csi {
const struct sun4i_csi_traits *traits;
void __iomem *regs;
+ int irq;
struct clk *bus_clk;
struct clk *isp_clk;
struct clk *ram_clk;
diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c
index e911c7f7acc5..fd83dbd1a3ff 100644
--- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c
+++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c
@@ -43,6 +43,23 @@ static void sun4i_csi_capture_stop(struct sun4i_csi *csi)
writel(0, csi->regs + CSI_CPT_CTRL_REG);
}
+static void sun4i_csi_disable_irq(struct sun4i_csi *csi)
+{
+ /*
+ * Disable the frame done interrupt and wait for the handler to
+ * finish. A frame may complete right as capture is stopped, so an
+ * interrupt can still be pending here; without this the handler could
+ * run after the device is powered down (pm_runtime_put() on release)
+ * and access registers on a gated block.
+ *
+ * Read the register back to flush the posted write so the disable has
+ * reached the device before synchronize_irq() waits for the handler.
+ */
+ writel(0, csi->regs + CSI_INT_EN_REG);
+ readl(csi->regs + CSI_INT_EN_REG);
+ synchronize_irq(csi->irq);
+}
+
static int sun4i_csi_queue_setup(struct vb2_queue *vq,
unsigned int *nbuffers,
unsigned int *nplanes,
@@ -328,6 +345,7 @@ static int sun4i_csi_start_streaming(struct vb2_queue *vq, unsigned int count)
err_disable_device:
sun4i_csi_capture_stop(csi);
+ sun4i_csi_disable_irq(csi);
err_disable_pipeline:
video_device_pipeline_stop(&csi->vdev);
@@ -353,6 +371,7 @@ static void sun4i_csi_stop_streaming(struct vb2_queue *vq)
v4l2_subdev_call(csi->src_subdev, video, s_stream, 0);
sun4i_csi_capture_stop(csi);
+ sun4i_csi_disable_irq(csi);
/* Release all active buffers */
spin_lock_irqsave(&csi->qlock, flags);
@@ -438,6 +457,7 @@ int sun4i_csi_dma_register(struct sun4i_csi *csi, int irq)
dev_err(csi->dev, "Couldn't register our interrupt\n");
goto err_unregister_device;
}
+ csi->irq = irq;
return 0;
--
2.25.1
next prev parent reply other threads:[~2026-08-10 6:25 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-08 11:05 [PATCH v1 0/3] media: sun4i-csi: fix lifecycle bugs (leak, IRQ, unbind) Cong Nguyen
2026-08-08 11:06 ` [PATCH v1 1/3] media: sun4i-csi: fix video device and subdev leak in notify_complete() Cong Nguyen
2026-08-08 11:37 ` sashiko-bot
2026-08-08 11:17 ` [PATCH v1 2/3] media: sun4i-csi: disable interrupts when stopping streaming Cong Nguyen
2026-08-08 11:30 ` sashiko-bot
2026-08-08 11:17 ` [PATCH v1 3/3] media: sun4i-csi: add notifier unbind callback to drop the source subdev Cong Nguyen
2026-08-08 11:29 ` sashiko-bot
2026-08-10 6:25 ` [PATCH v2 0/3] media: sun4i-csi: fix probe/streaming lifecycle bugs Cong Nguyen
2026-08-10 6:25 ` [PATCH v2 1/3] media: sun4i-csi: fix video device and subdev leak in notify_complete() Cong Nguyen
2026-08-10 6:42 ` sashiko-bot
2026-08-10 6:25 ` Cong Nguyen [this message]
2026-08-10 6:37 ` [PATCH v2 2/3] media: sun4i-csi: disable interrupts when stopping streaming sashiko-bot
2026-08-10 6:25 ` [PATCH v2 3/3] media: sun4i-csi: add notifier unbind callback to drop the source subdev Cong Nguyen
2026-08-10 6:42 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260810062521.1709379-3-congnt264@gmail.com \
--to=congnt264@gmail.com \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=samuel@sholland.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.