From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Sangho Lee <kudo3228@gmail.com>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10.y 2/2] Bluetooth: HIDP: reject frames without a transaction header
Date: Mon, 10 Aug 2026 09:34:32 -0400 [thread overview]
Message-ID: <20260810133432.1246348-2-sashal@kernel.org> (raw)
In-Reply-To: <20260810133432.1246348-1-sashal@kernel.org>
From: Sangho Lee <kudo3228@gmail.com>
[ Upstream commit 47778d2c2087b5d192398f6fddf692d16a5431cf ]
hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0]
before checking that the L2CAP SDU contains a transaction header. A
connected HIDP peer can send an empty basic-mode SDU and make both paths
use an uninitialized byte from skb tailroom.
KMSAN reports the use in hidp_session_run(), with the uninitialized value
originating in __alloc_skb() through vhci_write(). The control path
produces two reports and the interrupt path produces one.
The byte can also be controlled by a malformed lower-layer packet. If an
HCI ACL packet contains an L2CAP PDU with a declared zero-length payload
followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to
the declared PDU length before dispatch. The current HIDP path nevertheless
consumes the extra byte as HIDP_TRANS_HID_CONTROL |
HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this
change, the same packet is discarded and a subsequent feature report
request succeeds.
Pull the transaction header with skb_pull_data() and discard frames that
do not contain it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Sangho Lee <kudo3228@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hidp/core.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 068c3c2505170..8e9e07684ff78 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -550,16 +550,18 @@ static int hidp_process_data(struct hidp_session *session, struct sk_buff *skb,
static void hidp_recv_ctrl_frame(struct hidp_session *session,
struct sk_buff *skb)
{
- unsigned char hdr, type, param;
+ unsigned char type, param;
+ u8 *hdr;
int free_skb = 1;
BT_DBG("session %p skb %p len %d", session, skb, skb->len);
- hdr = skb->data[0];
- skb_pull(skb, 1);
+ hdr = skb_pull_data(skb, 1);
+ if (!hdr)
+ goto free;
- type = hdr & HIDP_HEADER_TRANS_MASK;
- param = hdr & HIDP_HEADER_PARAM_MASK;
+ type = *hdr & HIDP_HEADER_TRANS_MASK;
+ param = *hdr & HIDP_HEADER_PARAM_MASK;
switch (type) {
case HIDP_TRANS_HANDSHAKE:
@@ -580,6 +582,7 @@ static void hidp_recv_ctrl_frame(struct hidp_session *session,
break;
}
+free:
if (free_skb)
kfree_skb(skb);
}
@@ -587,14 +590,15 @@ static void hidp_recv_ctrl_frame(struct hidp_session *session,
static void hidp_recv_intr_frame(struct hidp_session *session,
struct sk_buff *skb)
{
- unsigned char hdr;
+ u8 *hdr;
BT_DBG("session %p skb %p len %d", session, skb, skb->len);
- hdr = skb->data[0];
- skb_pull(skb, 1);
+ hdr = skb_pull_data(skb, 1);
+ if (!hdr)
+ goto free;
- if (hdr == (HIDP_TRANS_DATA | HIDP_DATA_RTYPE_INPUT)) {
+ if (*hdr == (HIDP_TRANS_DATA | HIDP_DATA_RTYPE_INPUT)) {
hidp_set_timer(session);
if (session->input)
@@ -606,9 +610,10 @@ static void hidp_recv_intr_frame(struct hidp_session *session,
BT_DBG("report len %d", skb->len);
}
} else {
- BT_DBG("Unsupported protocol header 0x%02x", hdr);
+ BT_DBG("Unsupported protocol header 0x%02x", *hdr);
}
+free:
kfree_skb(skb);
}
--
2.53.0
prev parent reply other threads:[~2026-08-10 13:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-05 9:38 FAILED: patch "[PATCH] Bluetooth: HIDP: reject frames without a transaction header" failed to apply to 5.10-stable tree gregkh
2026-08-10 13:34 ` [PATCH 5.10.y 1/2] skbuff: introduce skb_pull_data Sasha Levin
2026-08-10 13:34 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260810133432.1246348-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=kudo3228@gmail.com \
--cc=luiz.von.dentz@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.