From: Long Li <longli@microsoft.com>
To: Long Li <longli@microsoft.com>,
Konstantin Taranov <kotaranov@microsoft.com>,
Jakub Kicinski <kuba@kernel.org>,
"David S . Miller" <davem@davemloft.net>,
Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
Jason Gunthorpe <jgg@ziepe.ca>, Leon Romanovsky <leon@kernel.org>,
Haiyang Zhang <haiyangz@microsoft.com>,
"K . Y . Srinivasan" <kys@microsoft.com>,
Wei Liu <wei.liu@kernel.org>, Dexuan Cui <decui@microsoft.com>,
shradhagupta@linux.microsoft.com, Simon Horman <horms@kernel.org>,
ernis@linux.microsoft.com, stephen@networkplumber.org
Cc: netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v2 05/13] net: mana: swap queue sets in mana_change_mtu
Date: Mon, 10 Aug 2026 23:35:02 -0700 [thread overview]
Message-ID: <20260811063506.2428213-6-longli@microsoft.com> (raw)
In-Reply-To: <20260811063506.2428213-1-longli@microsoft.com>
The RX buffer layout depends on the MTU - see mana_get_rxbuf_cfg() - so
changing it rebuilds the queues. Convert mana_change_mtu() to the
pre-allocate and swap helpers.
The MTU becomes part of the queue-set configuration:
- struct mana_qset gains mtu, so it is swapped atomically with the
queues it describes and restored by the rollback path.
- mana_port_context gains configured_mtu, the MTU the current RX queues
were built for. mana_create_rxq() now sizes buffers from it rather
than ndev->mtu, so a new set can be built for a different MTU while
ndev->mtu still advertises the old one.
- mana_publish_qset() commits ndev->mtu once the new set is serving
traffic. It is a no-op for callers that do not change the MTU.
Previously ndev->mtu was written before mana_attach() and rolled back on
failure, so a failed change was briefly visible to the stack.
mana_pre_alloc_rxbufs() is no longer needed here; de-risking allocation
after teardown is pointless when there is no teardown.
Signed-off-by: Long Li <longli@microsoft.com>
---
drivers/net/ethernet/microsoft/mana/mana_en.c | 75 ++++++++++++++-----
.../ethernet/microsoft/mana/mana_ethtool.c | 8 +-
include/net/mana/mana.h | 14 +++-
3 files changed, 74 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c
index 5f682e3d5a706149954764d083b70f25906f28df..4c79d6e82d9a93786ea877fbcef2b3f9d4093a6c 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_en.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_en.c
@@ -889,35 +889,54 @@ int mana_pre_alloc_rxbufs(struct mana_port_context *mpc, int new_mtu, int num_qu
return -ENOMEM;
}
+/* mana_change_mtu - resize RX buffers for a new MTU
+ *
+ * Uses the pre-allocate + swap path: the new queue set is built for
+ * @new_mtu while the current one keeps serving traffic at the old MTU.
+ * ndev->mtu is only updated once the new set is live (see
+ * mana_publish_qset), so a failed allocation leaves both the queues and
+ * the advertised MTU untouched.
+ */
static int mana_change_mtu(struct net_device *ndev, int new_mtu)
{
struct mana_port_context *mpc = netdev_priv(ndev);
- unsigned int old_mtu = ndev->mtu;
+ struct mana_port_context *scratch;
+ struct mana_qset newq, oldq;
int err;
- /* Pre-allocate buffers to prevent failure in mana_attach later */
- err = mana_pre_alloc_rxbufs(mpc, new_mtu, mpc->num_queues);
- if (err) {
- netdev_err(ndev, "Insufficient memory for new MTU\n");
- return err;
+ /* Port is down: no queues to rebuild, just record the new MTU.
+ * mana_open() will size the RX buffers accordingly.
+ */
+ if (!mpc->port_is_up) {
+ mpc->configured_mtu = new_mtu;
+ WRITE_ONCE(ndev->mtu, new_mtu);
+ return 0;
}
- err = mana_detach(ndev, false);
- if (err) {
- netdev_err(ndev, "mana_detach failed: %d\n", err);
- goto out;
- }
+ scratch = mana_qset_scratch_alloc(mpc);
+ if (!scratch)
+ return -ENOMEM;
- WRITE_ONCE(ndev->mtu, new_mtu);
+ err = mana_alloc_qset(scratch, mpc->num_queues, mpc->rx_queue_size,
+ mpc->tx_queue_size, mpc->priv_flags, new_mtu,
+ &newq);
+ if (err)
+ goto free_scratch; /* current qset and ndev->mtu untouched */
- err = mana_attach(ndev);
+ err = mana_publish_qset(mpc, &newq, &oldq);
if (err) {
- netdev_err(ndev, "mana_attach failed: %d\n", err);
- WRITE_ONCE(ndev->mtu, old_mtu);
+ mana_free_qset(scratch, &newq);
+ goto free_scratch;
}
-out:
- mana_pre_dealloc_rxbufs(mpc);
+ mana_free_qset(scratch, &oldq);
+
+free_scratch:
+ /* After the caller-side cleanup above, so the EQ pool outlives the
+ * CQs that reference it.
+ */
+ mana_publish_close_if_needed(mpc);
+ mana_qset_scratch_free(scratch);
return err;
}
@@ -3097,7 +3116,8 @@ static struct mana_rxq *mana_create_rxq(struct mana_port_context *apc,
rxq->rxq_idx = rxq_idx;
rxq->rxobj = INVALID_MANA_HANDLE;
- mana_get_rxbuf_cfg(apc, ndev->mtu, &rxq->datasize, &rxq->alloc_size,
+ mana_get_rxbuf_cfg(apc, apc->configured_mtu, &rxq->datasize,
+ &rxq->alloc_size,
&rxq->headroom, &rxq->frag_count);
/* Create page pool for RX queue */
err = mana_create_page_pool(rxq, gc);
@@ -3965,6 +3985,7 @@ static void mana_qset_snapshot(const struct mana_port_context *ctx,
out->rx_queue_size = ctx->rx_queue_size;
out->tx_queue_size = ctx->tx_queue_size;
out->priv_flags = ctx->priv_flags;
+ out->mtu = ctx->configured_mtu;
out->mana_eqs_debugfs = ctx->mana_eqs_debugfs;
}
@@ -3986,6 +4007,7 @@ static void mana_qset_install(struct mana_port_context *ctx,
ctx->rx_queue_size = qset->rx_queue_size;
ctx->tx_queue_size = qset->tx_queue_size;
ctx->priv_flags = qset->priv_flags;
+ ctx->configured_mtu = qset->mtu;
ctx->mana_eqs_debugfs = qset->mana_eqs_debugfs;
}
@@ -4049,6 +4071,7 @@ void mana_qset_scratch_free(struct mana_port_context *scratch)
* @rx_queue_size: new RX ring size
* @tx_queue_size: new TX ring size
* @priv_flags: new priv-flag word (affects full-page RX)
+ * @mtu: MTU the new set is sized for
* @out: output qset, populated on success
*
* The live port context is not referenced at all, so the currently
@@ -4057,7 +4080,7 @@ void mana_qset_scratch_free(struct mana_port_context *scratch)
*/
int mana_alloc_qset(struct mana_port_context *scratch, unsigned int num_queues,
unsigned int rx_queue_size, unsigned int tx_queue_size,
- u32 priv_flags, struct mana_qset *out)
+ u32 priv_flags, int mtu, struct mana_qset *out)
{
struct net_device *ndev = scratch->ndev;
int err;
@@ -4069,6 +4092,12 @@ int mana_alloc_qset(struct mana_port_context *scratch, unsigned int num_queues,
scratch->tx_queue_size = tx_queue_size;
scratch->priv_flags = priv_flags;
+ /* mana_get_rxbuf_cfg() reads this when sizing RX buffers, so the
+ * new set is built for the requested MTU without disturbing the
+ * running set.
+ */
+ scratch->configured_mtu = mtu;
+
err = mana_init_port_context(scratch);
if (err)
goto out_err;
@@ -4361,6 +4390,11 @@ int mana_publish_qset(struct mana_port_context *apc, struct mana_qset *newq,
if (err)
goto rollback;
+ /* The new set is serving traffic: advertise its MTU. A no-op for
+ * callers that are not changing the MTU.
+ */
+ WRITE_ONCE(ndev->mtu, apc->configured_mtu);
+
/* Pair with the queue-state stores above: a datapath reader that sees
* the gate open must also see the queue set it is about to index.
*/
@@ -4413,6 +4447,8 @@ int mana_publish_qset(struct mana_port_context *apc, struct mana_qset *newq,
return err;
}
+ WRITE_ONCE(ndev->mtu, apc->configured_mtu);
+
/* Same pairing as the success path: the restored queue set has to be
* visible before the gate reopens on it.
*/
@@ -4658,6 +4694,7 @@ static int mana_probe_port(struct mana_context *ac, int port_idx,
apc->port_handle = INVALID_MANA_HANDLE;
apc->pf_filter_handle = INVALID_MANA_HANDLE;
apc->port_idx = port_idx;
+ apc->configured_mtu = ndev->mtu;
apc->link_cfg_error = 1;
apc->cqe_coalescing_enable = 0;
apc->cqe8_coalescing_enable = 0;
diff --git a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
index 9392b82d3d48a2638512a53f9c004629b0c679e5..2a6325256fad3edf1aafbc72f0cd5dc18d61384e 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
@@ -737,7 +737,8 @@ static int mana_set_channels(struct net_device *ndev,
}
err = mana_alloc_qset(scratch, new_count, apc->rx_queue_size,
- apc->tx_queue_size, apc->priv_flags, &newq);
+ apc->tx_queue_size, apc->priv_flags,
+ apc->configured_mtu, &newq);
if (err)
goto free_scratch; /* current qset untouched, nothing to undo */
@@ -839,7 +840,7 @@ static int mana_set_ringparam(struct net_device *ndev,
}
err = mana_alloc_qset(scratch, apc->num_queues, new_rx, new_tx,
- apc->priv_flags, &newq);
+ apc->priv_flags, apc->configured_mtu, &newq);
if (err) {
NL_SET_ERR_MSG_FMT(extack, "failed to change ring params: %d",
err);
@@ -940,7 +941,8 @@ static int mana_set_priv_flags(struct net_device *ndev, u32 priv_flags)
}
err = mana_alloc_qset(scratch, apc->num_queues, apc->rx_queue_size,
- apc->tx_queue_size, priv_flags, &newq);
+ apc->tx_queue_size, priv_flags,
+ apc->configured_mtu, &newq);
if (err)
goto free_scratch; /* current qset and priv_flags untouched */
diff --git a/include/net/mana/mana.h b/include/net/mana/mana.h
index e4aaad7bec34297cf406181560a1839d3e6a73df..2fc75e6cd41a63878788182cd099379c8c698b33 100644
--- a/include/net/mana/mana.h
+++ b/include/net/mana/mana.h
@@ -621,6 +621,12 @@ struct mana_port_context {
unsigned int rx_queue_size;
unsigned int tx_queue_size;
+ /* MTU the current RX queues were built for. Normally equal to
+ * ndev->mtu, but during a queue-set swap the new set is built for
+ * the new MTU while ndev->mtu still advertises the old one.
+ */
+ int configured_mtu;
+
mana_handle_t port_handle;
mana_handle_t pf_filter_handle;
@@ -714,6 +720,12 @@ struct mana_qset {
unsigned int tx_queue_size;
u32 priv_flags;
+ /* MTU the RX buffers of this set were sized for. It feeds
+ * mana_get_rxbuf_cfg(), so it is part of the queue-set
+ * configuration and must be swapped atomically with the queues.
+ */
+ int mtu;
+
/* Per-queue-set debugfs root ("EQs"). Owned by the qset: it is
* recreated by mana_create_eq() for each new set and torn down
* with that set, so it must travel with the qset rather than
@@ -739,7 +751,7 @@ struct mana_port_context *mana_qset_scratch_alloc(struct mana_port_context *apc)
void mana_qset_scratch_free(struct mana_port_context *scratch);
int mana_alloc_qset(struct mana_port_context *scratch, unsigned int num_queues,
unsigned int rx_queue_size, unsigned int tx_queue_size,
- u32 priv_flags, struct mana_qset *out);
+ u32 priv_flags, int mtu, struct mana_qset *out);
int mana_publish_qset(struct mana_port_context *apc, struct mana_qset *newq,
struct mana_qset *out_old);
void mana_publish_close_if_needed(struct mana_port_context *apc);
--
2.43.0
next prev parent reply other threads:[~2026-08-11 6:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-11 6:34 [PATCH net-next v2 00/13] net: mana: reconfigure by replacing the queue set Long Li
2026-08-11 6:34 ` [PATCH net-next v2 01/13] net: mana: add queue-set allocation and teardown helpers Long Li
2026-08-11 6:34 ` [PATCH net-next v2 02/13] net: mana: swap queue sets in mana_set_channels Long Li
2026-08-11 6:35 ` [PATCH net-next v2 03/13] net: mana: swap queue sets in mana_set_ringparam Long Li
2026-08-11 6:35 ` [PATCH net-next v2 04/13] net: mana: swap queue sets in mana_set_priv_flags Long Li
2026-08-11 6:35 ` Long Li [this message]
2026-08-11 6:35 ` [PATCH net-next v2 06/13] net: mana: swap queue sets in mana_xdp_set Long Li
2026-08-11 6:35 ` [PATCH net-next v2 07/13] net: mana: do not bail out of mana_detach on dealloc failure Long Li
2026-08-11 6:35 ` [PATCH net-next v2 08/13] net: mana: keep per-queue statistics in the port context Long Li
2026-08-11 6:35 ` [PATCH net-next v2 09/13] net: mana: share the EQ pool across a queue-set swap Long Li
2026-08-11 16:40 ` [PATCH net-next v2 00/13] net: mana: reconfigure by replacing the queue set Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260811063506.2428213-6-longli@microsoft.com \
--to=longli@microsoft.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=decui@microsoft.com \
--cc=edumazet@google.com \
--cc=ernis@linux.microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=horms@kernel.org \
--cc=jgg@ziepe.ca \
--cc=kotaranov@microsoft.com \
--cc=kuba@kernel.org \
--cc=kys@microsoft.com \
--cc=leon@kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shradhagupta@linux.microsoft.com \
--cc=stephen@networkplumber.org \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.