All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jack Wang <163wangjack@gmail.com>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Vinicius Costa Gomes <vinicius.gomes@intel.com>,
	Jamal Hadi Salim <jhs@mojatatu.com>,
	Jiri Pirko <jiri@resnulli.us>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Simon Horman <horms@kernel.org>,
	Elena Salomatkina <esalomatkina@ispras.ru>,
	Jack Wang <163wangjack@gmail.com>
Subject: [PATCH net v2] net/sched: cbs: perform rate conversions in signed 64-bit arithmetic
Date: Wed, 12 Aug 2026 18:00:44 +0800	[thread overview]
Message-ID: <20260812100044.38040-1-163wangjack@gmail.com> (raw)

cbs_set_port_rate() and cbs_change() multiply link rates and slope values
by BYTES_PER_KBIT, an unsigned long constant.  On 32-bit architectures,
the multiplications therefore take place in 32-bit unsigned arithmetic
before the results are assigned to s64 fields.

For port rates above approximately 34.36 Gbit/s this wraps port_rate.
The same conversion turns a negative sendslope into a large positive
value, reversing the CBS credit adjustment.  This affects software CBS;
port_rate is also refreshed on NETDEV_UP and NETDEV_CHANGE notifications.

Cast the first operand of each multiplication to s64 so all intermediate
operations use signed 64-bit arithmetic and preserve the value's sign on
every architecture

Also reject a non-positive idleslope. A negative idleslope can arm the
watchdog in the past and busy-loop.

Fixes: 585d763af09c ("net/sched: Introduce Credit Based Shaper (CBS) qdisc")
Fixes: 397006ba5d918 ("net/sched: cbs: Fix integer overflow in cbs_set_port_rate()")

Signed-off-by: Jack Wang <163wangjack@gmail.com>
---
v2:
  - Reject a non-positive idleslope to prevent scheduling the watchdog in
    the past.
  - Leave the pre-existing timediff_to_credits() overflow for a separate
    follow-up.

  v1: https://lore.kernel.org/netdev/20260806155253.50252-1-163wangjack@gmail.com/

 net/sched/sch_cbs.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/net/sched/sch_cbs.c b/net/sched/sch_cbs.c
index 1c93469c56e3..e960c8e01ef4 100644
--- a/net/sched/sch_cbs.c
+++ b/net/sched/sch_cbs.c
@@ -335,7 +335,7 @@ static void cbs_set_port_rate(struct net_device *dev, struct cbs_sched_data *q)
 		speed = ecmd.base.speed;
 
 skip:
-	port_rate = speed * 1000 * BYTES_PER_KBIT;
+	port_rate = (s64)speed * 1000 * BYTES_PER_KBIT;
 
 	atomic64_set(&q->port_rate, port_rate);
 	netdev_dbg(dev, "cbs: set %s's port_rate to: %lld, linkspeed: %d\n",
@@ -392,6 +392,10 @@ static int cbs_change(struct Qdisc *sch, struct nlattr *opt,
 	}
 
 	qopt = nla_data(tb[TCA_CBS_PARMS]);
+	if (qopt->idleslope <= 0) {
+		NL_SET_ERR_MSG(extack, "Idleslope must be greater than zero");
+		return -EINVAL;
+	}
 
 	if (!qopt->offload) {
 		cbs_set_port_rate(dev, q);
@@ -405,8 +409,8 @@ static int cbs_change(struct Qdisc *sch, struct nlattr *opt,
 	/* Everything went OK, save the parameters used. */
 	WRITE_ONCE(q->hicredit, qopt->hicredit);
 	WRITE_ONCE(q->locredit, qopt->locredit);
-	WRITE_ONCE(q->idleslope, qopt->idleslope * BYTES_PER_KBIT);
-	WRITE_ONCE(q->sendslope, qopt->sendslope * BYTES_PER_KBIT);
+	WRITE_ONCE(q->idleslope, (s64)qopt->idleslope * BYTES_PER_KBIT);
+	WRITE_ONCE(q->sendslope, (s64)qopt->sendslope * BYTES_PER_KBIT);
 	WRITE_ONCE(q->offload, qopt->offload);
 
 	return 0;

base-commit: 7b53449540502cb21b32bca62a6258e22cd97bbe
-- 
2.53.0


             reply	other threads:[~2026-08-12 10:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-12 10:00 Jack Wang [this message]
  -- strict thread matches above, loose matches on Subject: below --
2026-08-06 15:49 [PATCH] net/sched: cbs: perform rate conversions in signed 64-bit arithmetic Jack Wang
2026-08-12  8:02 ` [PATCH net v2] " Jack Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260812100044.38040-1-163wangjack@gmail.com \
    --to=163wangjack@gmail.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=esalomatkina@ispras.ru \
    --cc=horms@kernel.org \
    --cc=jhs@mojatatu.com \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=vinicius.gomes@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.