[PATCH v3 9/9] s390/vfio-ap: Fix memory leak when queue removed from host AP config

[Anthony Krowiak <akrowiak@linux.ibm.com>]

When an adapter or domain is removed from the host's AP configuration, the
AP bus invokes vfio_ap_on_cfg_changed() to notify the vfio_ap device
driver. For each ap_matrix_mdev object to which the adapter or domain
is assigned, vfio_ap_mdev_hot_unplug_cfg() is called and removes the
adapter or domain from the matrix_mdev->shadow_apcb (i.e., the guest's AP
configuration) and hot unplugs it if a guest is using it. The new host
AP configuration (sans adapter or domain) is then stored in
matrix_dev->info.

When the AP bus subsequently unbinds the physical queue devices associated
with the adapter or domain that has been removed, it invokes
vfio_ap_mdev_remove_queue() for each queue removed. At this point, the
adapter or domain will no longer be assigned to the
matrix_mdev->shadow_apcb or the matrix_dev->info object because they would
have been removed by vfio_ap_on_cfg_changed(). Consequently,
vfio_ap_mdev_reset_queue(q) is bypassed and kfree(q) is called
without executing vfio_ap_free_aqic_resources(). This indefinitely pins
guest memory (q->saved_iova) and leaks KVM GISC resources (q->saved_isc).

Note that resetting the queue would fail with an invalid APQN error due to
the fact the queue is not longer in the host's AP configuration; however,
it is still necessary to free the AQIC resources. The fix here is to call
vfio_ap_free_aqic_resources if the adapter or domain is neither in
matrix_mdev->shadow_apcb or matrix_dev->info.

Fixes: b9bd10c43456d ("s390/vfio-ap: do not reset queue removed from host config")
Cc: stable@vger.kernel.org
Signed-off-by: Anthony Krowiak <akrowiak@linux.ibm.com>
---
 drivers/s390/crypto/vfio_ap_ops.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 3652ba792be7..faab5e9179ff 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -2507,12 +2507,15 @@ void vfio_ap_mdev_remove_queue(struct ap_device *apdev)
 	/*
 	 * If the queue is not in the host's AP configuration, then resetting
 	 * it will fail with response code 01, (APQN not valid); so, let's make
-	 * sure it is in the host's config.
+	 * sure it is in the host's config. If it is not, then free the KVM GISC
+	 * resources.
 	 */
 	if (test_bit_inv(apid, (unsigned long *)matrix_dev->info.apm) &&
 	    test_bit_inv(apqi, (unsigned long *)matrix_dev->info.aqm)) {
 		vfio_ap_mdev_reset_queue(q);
 		flush_work(&q->reset_work);
+	} else {
+		vfio_ap_free_aqic_resources(q);
 	}
 
 done:
-- 
2.53.0