From: Kyle Hsieh <kylehsieh1995@gmail.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Kyle Hsieh <kylehsieh1995@gmail.com>
Subject: [PATCH v5 2/2] iio: adc: ti-ads112c04: Add support for TI ADS112C04
Date: Thu, 13 Aug 2026 11:06:03 +0800 [thread overview]
Message-ID: <20260813-ti-ads112c04-driver-v5-2-79dff9e249cd@gmail.com> (raw)
In-Reply-To: <20260813-ti-ads112c04-driver-v5-0-79dff9e249cd@gmail.com>
Add IIO driver support for the Texas Instruments ADS112C04 (16-bit)
delta-sigma ADCs.
The driver implements:
- Single-shot conversions using the IIO raw read interface.
- Dynamic parsing of single-ended and differential channels from
device tree child nodes.
- Hardware interrupt support via the DRDY pin, falling back to
software polling if no IRQ is provided.
- Per-channel reference source selection (internal 2.048V, external
REFP/REFN, or AVDD) via the reference-sources device tree property.
refn-supply is not yet supported.
- Hardware reset via the reset controller framework, falling back to
the RESET command when no reset controller is present.
Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
---
MAINTAINERS | 1 +
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ti-ads112c04.c | 525 +++++++++++++++++++++++++++++++++++++++++
4 files changed, 537 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 417d74b6d6cc..f51fbda9d4b9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -26992,6 +26992,7 @@ M: Kyle Hsieh <kylehsieh1995@gmail.com>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/iio/adc/ti,ads112c04.yaml
+F: drivers/iio/adc/ti-ads112c04.c
TI ADS112C14 ADC DRIVER
M: David Lechner <dlechner@baylibre.com>
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 990e7b3e7212..037fc7df8415 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1817,6 +1817,16 @@ config TI_ADS1119
This driver can also be built as a module. If so, the module will be
called ti-ads1119.
+config TI_ADS112C04
+ tristate "Texas Instruments ADS112C04 ADC"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments
+ ADS112C04 (16-bit) I2C analog to digital converters.
+
+ This driver can also be built as a module. If so, the module will be
+ called ti-ads112c04.
+
config TI_ADS112C14
tristate "Texas Instruments ADS112C14/ADS122C14"
depends on I2C
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index dcec0abb03b7..d8acf2831fd2 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -155,6 +155,7 @@ obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
obj-$(CONFIG_TI_ADS1018) += ti-ads1018.o
obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o
obj-$(CONFIG_TI_ADS1119) += ti-ads1119.o
+obj-$(CONFIG_TI_ADS112C04) += ti-ads112c04.o
obj-$(CONFIG_TI_ADS112C14) += ti-ads112c14.o
obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
obj-$(CONFIG_TI_ADS1298) += ti-ads1298.o
diff --git a/drivers/iio/adc/ti-ads112c04.c b/drivers/iio/adc/ti-ads112c04.c
new file mode 100644
index 000000000000..c2995e94c4f8
--- /dev/null
+++ b/drivers/iio/adc/ti-ads112c04.c
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Texas Instruments ADS112C04 16-bit I2C ADC driver
+ *
+ * Copyright (c) 2026 Kyle Hsieh <kylehsieh1995@gmail.com>
+ *
+ * Datasheet: https://www.ti.com/lit/ds/symlink/ads112c04.pdf
+ * Based on TI Reference Code and standard Linux IIO framework.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#include <linux/iio/iio.h>
+
+#define ADS112C04_CMD_RESET 0x06
+#define ADS112C04_CMD_START_SYNC 0x08
+#define ADS112C04_CMD_RDATA 0x10
+#define ADS112C04_CMD_RREG(reg) (0x20 | ((reg) << 2))
+#define ADS112C04_CMD_WREG(reg) (0x40 | ((reg) << 2))
+
+#define ADS112C04_REG_CONFIG0 0x00
+#define ADS112C04_CONF0_MUX GENMASK(7, 4)
+#define ADS112C04_CONF0_MUX_AIN0_AIN1 0
+#define ADS112C04_CONF0_MUX_AIN_SINGLE_BASE 8
+#define ADS112C04_CONF0_GAIN GENMASK(3, 1)
+#define ADS112C04_CONF0_GAIN_X1 0
+#define ADS112C04_CONF0_PGA_BYPASS BIT(0)
+
+#define ADS112C04_REG_CONFIG1 0x01
+#define ADS112C04_CONF1_DR GENMASK(7, 5)
+#define ADS112C04_CONF1_DR_20SPS 0
+#define ADS112C04_CONF1_MODE BIT(4)
+#define ADS112C04_CONF1_MODE_NORMAL 0
+#define ADS112C04_CONF1_CM BIT(3)
+#define ADS112C04_CONF1_CM_SINGLE_SHOT 0
+#define ADS112C04_CONF1_VREF GENMASK(2, 1)
+#define ADS112C04_CONF1_VREF_INTERNAL 0
+#define ADS112C04_CONF1_VREF_EXTERNAL 1
+#define ADS112C04_CONF1_VREF_AVDD 2
+#define ADS112C04_CONF1_TS BIT(0)
+#define ADS112C04_CONF1_TS_DISABLED 0
+
+#define ADS112C04_REG_CONFIG2 0x02
+#define ADS112C04_CONF2_DRDY BIT(7)
+
+#define ADS112C04_INT_REF_mV 2048
+
+#define ADS112C04_MAX_CHANNELS 12
+
+enum {
+ ADS112C04_VREF_SOURCE_INTERNAL,
+ ADS112C04_VREF_SOURCE_EXTERNAL,
+ ADS112C04_VREF_SOURCE_AVDD,
+};
+
+static const char * const ads112c04_vref_names[] = {
+ [ADS112C04_VREF_SOURCE_INTERNAL] = "internal",
+ [ADS112C04_VREF_SOURCE_EXTERNAL] = "external",
+ [ADS112C04_VREF_SOURCE_AVDD] = "avdd",
+};
+
+static const u8 ads112c04_vref_reg_val[] = {
+ [ADS112C04_VREF_SOURCE_INTERNAL] = ADS112C04_CONF1_VREF_INTERNAL,
+ [ADS112C04_VREF_SOURCE_EXTERNAL] = ADS112C04_CONF1_VREF_EXTERNAL,
+ [ADS112C04_VREF_SOURCE_AVDD] = ADS112C04_CONF1_VREF_AVDD,
+};
+
+/* Indexed by [AINP][AINN], -1 means the combination is not available. */
+static const s8 ads112c04_diff_mux[4][4] = {
+ { -1, 0, 1, 2 },
+ { 3, -1, 4, 5 },
+ { -1, -1, -1, 6 },
+ { -1, -1, 7, -1 },
+};
+
+struct ads112c04_state {
+ struct i2c_client *client;
+ /* Protects concurrent ADC reads and device configuration */
+ struct mutex lock;
+ struct completion completion;
+ u32 avdd_mV;
+ u32 ext_ref_mV;
+ u8 *vref_source; /* one entry per channel, indexed by scan order */
+ u8 config0;
+ u8 config1;
+};
+
+static int ads112c04_write_cmd(struct i2c_client *client, u8 cmd)
+{
+ return i2c_smbus_write_byte(client, cmd);
+}
+
+static int ads112c04_read_reg(struct i2c_client *client, u8 reg, u8 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, ADS112C04_CMD_RREG(reg));
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+
+ return 0;
+}
+
+static int ads112c04_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ return i2c_smbus_write_byte_data(client, ADS112C04_CMD_WREG(reg), val);
+}
+
+static int ads112c04_wait_for_data(struct ads112c04_state *st)
+{
+ int ret, err;
+ u8 val;
+
+ if (st->client->irq > 0) {
+ /* Timeout is 100ms (slowest data rate is 20 SPS) */
+ if (!wait_for_completion_timeout(&st->completion, msecs_to_jiffies(100)))
+ return -ETIMEDOUT;
+
+ return 0;
+ }
+
+ ret = read_poll_timeout(ads112c04_read_reg, err,
+ (err < 0 || (val & ADS112C04_CONF2_DRDY)),
+ 1 * USEC_PER_MSEC, 100 * USEC_PER_MSEC, false,
+ st->client, ADS112C04_REG_CONFIG2, &val);
+ if (err < 0)
+ return err;
+
+ return ret;
+}
+
+static int ads112c04_read_data(struct ads112c04_state *st, int *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_word_swapped(st->client, ADS112C04_CMD_RDATA);
+ if (ret < 0)
+ return ret;
+
+ *val = sign_extend32(ret, 15);
+
+ return 0;
+}
+
+static int ads112c04_get_adc_result(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val)
+{
+ struct ads112c04_state *st = iio_priv(indio_dev);
+ unsigned int idx = chan - indio_dev->channels;
+ u8 new_config0, new_config1;
+ int ret;
+
+ new_config0 = st->config0;
+ FIELD_MODIFY(ADS112C04_CONF0_MUX, &new_config0, chan->address);
+
+ if (st->config0 != new_config0) {
+ ret = ads112c04_write_reg(st->client, ADS112C04_REG_CONFIG0,
+ new_config0);
+ if (ret < 0)
+ return ret;
+
+ st->config0 = new_config0;
+ }
+
+ new_config1 = st->config1;
+ FIELD_MODIFY(ADS112C04_CONF1_VREF, &new_config1,
+ ads112c04_vref_reg_val[st->vref_source[idx]]);
+
+ if (st->config1 != new_config1) {
+ ret = ads112c04_write_reg(st->client, ADS112C04_REG_CONFIG1,
+ new_config1);
+ if (ret < 0)
+ return ret;
+
+ st->config1 = new_config1;
+ }
+
+ reinit_completion(&st->completion);
+
+ ret = ads112c04_write_cmd(st->client, ADS112C04_CMD_START_SYNC);
+ if (ret < 0)
+ return ret;
+
+ ret = ads112c04_wait_for_data(st);
+ if (ret < 0)
+ return ret;
+
+ return ads112c04_read_data(st, val);
+}
+
+static int ads112c04_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct ads112c04_state *st = iio_priv(indio_dev);
+ unsigned int idx = chan - indio_dev->channels;
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&st->lock);
+ ret = ads112c04_get_adc_result(indio_dev, chan, val);
+ mutex_unlock(&st->lock);
+
+ if (ret < 0)
+ return ret;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ switch (st->vref_source[idx]) {
+ case ADS112C04_VREF_SOURCE_EXTERNAL:
+ *val = st->ext_ref_mV;
+ break;
+ case ADS112C04_VREF_SOURCE_AVDD:
+ *val = st->avdd_mV;
+ break;
+ default:
+ *val = ADS112C04_INT_REF_mV;
+ break;
+ }
+ *val2 = 15;
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static irqreturn_t ads112c04_irq_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct ads112c04_state *st = iio_priv(indio_dev);
+
+ complete(&st->completion);
+
+ return IRQ_HANDLED;
+}
+
+static const struct iio_info ads112c04_info = {
+ .read_raw = ads112c04_read_raw,
+};
+
+static int ads112c04_parse_vref_source(struct fwnode_handle *child)
+{
+ if (!fwnode_property_present(child, "reference-sources"))
+ return ADS112C04_VREF_SOURCE_INTERNAL;
+
+ return fwnode_property_match_property_string(child, "reference-sources",
+ ads112c04_vref_names,
+ ARRAY_SIZE(ads112c04_vref_names));
+}
+
+static int ads112c04_parse_channels(struct iio_dev *indio_dev,
+ bool *need_avdd_ref, bool *need_ext_ref)
+{
+ struct device *dev = indio_dev->dev.parent;
+ struct ads112c04_state *st = iio_priv(indio_dev);
+ struct iio_chan_spec *channels;
+ u32 num_channels, pair[2], channel;
+ unsigned int i;
+ int ret;
+
+ num_channels = device_get_named_child_node_count(dev, "channel");
+ if (!num_channels)
+ return dev_err_probe(dev, -EINVAL, "no channel subnodes found\n");
+
+ if (num_channels > ADS112C04_MAX_CHANNELS)
+ return dev_err_probe(dev, -EINVAL,
+ "num of channel nodes exceeds %d\n",
+ ADS112C04_MAX_CHANNELS);
+
+ channels = devm_kcalloc(dev, num_channels, sizeof(*channels), GFP_KERNEL);
+ if (!channels)
+ return -ENOMEM;
+
+ st->vref_source = devm_kcalloc(dev, num_channels,
+ sizeof(*st->vref_source), GFP_KERNEL);
+ if (!st->vref_source)
+ return -ENOMEM;
+
+ i = 0;
+ device_for_each_named_child_node_scoped(dev, child, "channel") {
+ struct iio_chan_spec *spec = &channels[i];
+
+ if (fwnode_property_present(child, "excitation-channels"))
+ return dev_err_probe(dev, -EOPNOTSUPP,
+ "excitation-channels is not supported yet\n");
+
+ st->vref_source[i] = ADS112C04_VREF_SOURCE_INTERNAL;
+
+ if (fwnode_property_present(child, "reference-sources")) {
+ ret = ads112c04_parse_vref_source(child);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "invalid reference-sources value\n");
+
+ st->vref_source[i] = ret;
+ }
+
+ if (st->vref_source[i] == ADS112C04_VREF_SOURCE_EXTERNAL)
+ *need_ext_ref = true;
+ if (st->vref_source[i] == ADS112C04_VREF_SOURCE_AVDD)
+ *need_avdd_ref = true;
+
+ /*
+ * REVISIT: when ti,refp-refn-resistor-ohms is implemented, a
+ * channel using an external resistor reference is effectively
+ * a resistance measurement and should use IIO_RESISTANCE.
+ */
+ spec->type = IIO_VOLTAGE;
+ spec->indexed = 1;
+ spec->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE);
+
+ if (fwnode_property_present(child, "single-channel")) {
+ ret = fwnode_property_read_u32(child, "single-channel", &channel);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to read single-channel property\n");
+
+ if (channel > 3)
+ return dev_err_probe(dev, -EINVAL,
+ "single-channel must be 0-3\n");
+
+ spec->channel = channel;
+ spec->address = ADS112C04_CONF0_MUX_AIN_SINGLE_BASE + channel;
+ } else if (fwnode_property_present(child, "diff-channels")) {
+ ret = fwnode_property_read_u32_array(child, "diff-channels",
+ pair, ARRAY_SIZE(pair));
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to read diff-channels property\n");
+
+ if (pair[0] > 3 || pair[1] > 3)
+ return dev_err_probe(dev, -EINVAL,
+ "diff-channels must be 0-3\n");
+
+ spec->channel = pair[0];
+ spec->channel2 = pair[1];
+ spec->differential = 1;
+
+ if (ads112c04_diff_mux[pair[0]][pair[1]] < 0)
+ return dev_err_probe(dev, -EINVAL,
+ "invalid diff-channels combination\n");
+
+ spec->address = ads112c04_diff_mux[pair[0]][pair[1]];
+ } else {
+ return dev_err_probe(dev, -EINVAL,
+ "channel node must have single-channel or diff-channels\n");
+ }
+
+ i++;
+ }
+
+ indio_dev->channels = channels;
+ indio_dev->num_channels = i;
+
+ return 0;
+}
+
+static int ads112c04_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct iio_dev *indio_dev;
+ struct ads112c04_state *st;
+ struct reset_control *reset;
+ bool need_avdd_ref = false, need_ext_ref = false;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ st->client = client;
+
+ ret = devm_mutex_init(dev, &st->lock);
+ if (ret)
+ return ret;
+
+ init_completion(&st->completion);
+
+ indio_dev->name = "ads112c04";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &ads112c04_info;
+
+ /* Forward compatibility checks for unimplemented DT properties */
+ if (device_property_present(dev, "refn-supply") ||
+ device_property_present(dev, "ti,refp-refn-resistor-ohms"))
+ return dev_err_probe(dev, -EOPNOTSUPP,
+ "refn-supply and external resistors are not supported yet\n");
+
+ ret = ads112c04_parse_channels(indio_dev, &need_avdd_ref, &need_ext_ref);
+ if (ret)
+ return ret;
+
+ if (need_avdd_ref) {
+ ret = devm_regulator_get_enable_read_voltage(dev, "avdd");
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to get avdd voltage\n");
+
+ st->avdd_mV = ret / (MICRO / MILLI);
+ } else {
+ ret = devm_regulator_get_enable(dev, "avdd");
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get avdd regulator\n");
+ }
+
+ ret = devm_regulator_get_enable(dev, "dvdd");
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get dvdd regulator\n");
+
+ if (device_property_present(dev, "refp-supply")) {
+ ret = devm_regulator_get_enable_read_voltage(dev, "refp");
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to get refp voltage\n");
+
+ st->ext_ref_mV = ret / (MICRO / MILLI);
+ }
+
+ if (need_ext_ref && !st->ext_ref_mV)
+ return dev_err_probe(dev, -EINVAL,
+ "external reference measurements require refp-supply\n");
+
+ /* Datasheet: POR releases ~500us after supplies are stable */
+ fsleep(500);
+
+ reset = devm_reset_control_get_optional_exclusive(dev, NULL);
+ if (IS_ERR(reset))
+ return dev_err_probe(dev, PTR_ERR(reset), "failed to get reset\n");
+
+ if (reset) {
+ ret = reset_control_reset(reset);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to reset device\n");
+ } else {
+ ret = ads112c04_write_cmd(client, ADS112C04_CMD_RESET);
+ if (ret < 0)
+ return ret;
+ }
+
+ fsleep(1 * USEC_PER_MSEC);
+
+ /*
+ * Initialize CONFIG0 with all fields explicit: gain of 1 with the PGA
+ * bypassed, which allows full-scale single-ended measurements. The MUX
+ * field is updated per channel before each conversion.
+ */
+ st->config0 = FIELD_PREP(ADS112C04_CONF0_MUX,
+ ADS112C04_CONF0_MUX_AIN0_AIN1) |
+ FIELD_PREP(ADS112C04_CONF0_GAIN,
+ ADS112C04_CONF0_GAIN_X1) |
+ ADS112C04_CONF0_PGA_BYPASS;
+
+ ret = ads112c04_write_reg(client, ADS112C04_REG_CONFIG0, st->config0);
+ if (ret)
+ return ret;
+
+ st->config1 = FIELD_PREP(ADS112C04_CONF1_DR,
+ ADS112C04_CONF1_DR_20SPS) |
+ FIELD_PREP(ADS112C04_CONF1_MODE,
+ ADS112C04_CONF1_MODE_NORMAL) |
+ FIELD_PREP(ADS112C04_CONF1_CM,
+ ADS112C04_CONF1_CM_SINGLE_SHOT) |
+ FIELD_PREP(ADS112C04_CONF1_VREF,
+ ADS112C04_CONF1_VREF_INTERNAL) |
+ FIELD_PREP(ADS112C04_CONF1_TS,
+ ADS112C04_CONF1_TS_DISABLED);
+
+ ret = ads112c04_write_reg(client, ADS112C04_REG_CONFIG1, st->config1);
+ if (ret)
+ return ret;
+
+ if (client->irq > 0) {
+ ret = devm_request_irq(dev, client->irq, ads112c04_irq_handler, 0,
+ indio_dev->name, indio_dev);
+ if (ret)
+ return ret;
+ }
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct i2c_device_id ads112c04_id[] = {
+ { .name = "ads112c04" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ads112c04_id);
+
+static const struct of_device_id ads112c04_of_match[] = {
+ { .compatible = "ti,ads112c04" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ads112c04_of_match);
+
+static struct i2c_driver ads112c04_driver = {
+ .driver = {
+ .name = "ads112c04",
+ .of_match_table = ads112c04_of_match,
+ },
+ .probe = ads112c04_probe,
+ .id_table = ads112c04_id,
+};
+module_i2c_driver(ads112c04_driver);
+
+MODULE_AUTHOR("Kyle Hsieh <kylehsieh1995@gmail.com>");
+MODULE_DESCRIPTION("Texas Instruments ADS112C04 ADC driver");
+MODULE_LICENSE("GPL");
--
2.34.1
next prev parent reply other threads:[~2026-08-13 3:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 3:06 [PATCH v5 0/2] iio: adc: Add support for Texas Instruments ADS112C04 Kyle Hsieh
2026-08-13 3:06 ` [PATCH v5 1/2] dt-bindings: iio: adc: ti,ads112c04: Add binding for ADS112C04 Kyle Hsieh
2026-08-13 3:10 ` sashiko-bot
2026-08-13 16:57 ` Rob Herring
2026-08-17 5:38 ` Kyle Hsieh
2026-08-13 3:06 ` Kyle Hsieh [this message]
2026-08-13 3:14 ` [PATCH v5 2/2] iio: adc: ti-ads112c04: Add support for TI ADS112C04 sashiko-bot
2026-08-17 7:12 ` Andy Shevchenko
2026-08-19 8:44 ` Kyle Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813-ti-ads112c04-driver-v5-2-79dff9e249cd@gmail.com \
--to=kylehsieh1995@gmail.com \
--cc=andy@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.