From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Jonathan Cameron <jic23@kernel.org>,
Maxwell Doose <maxwell@maxwelld.cc>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Marius Cristea" <marius.cristea@microchip.com>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Tomasz Duszynski" <tduszyns@gmail.com>,
"Jean-Baptiste Maneyrol" <jean-baptiste.maneyrol@tdk.com>
Subject: [PATCH v1 1/4] iio: light: Unshadow error codes in ->store()
Date: Thu, 13 Aug 2026 09:16:50 +0200 [thread overview]
Message-ID: <20260813071912.2465208-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20260813071912.2465208-1-andriy.shevchenko@linux.intel.com>
kstrtox() may return different error codes.
Unshadow them in the ->store() callback to give better error report.
While at it, add missing kstrtox.h inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/iio/light/isl29018.c | 7 +++++--
drivers/iio/light/lm3533-als.c | 11 +++++++----
drivers/iio/light/tsl2583.c | 15 +++++++++++----
drivers/iio/light/tsl2772.c | 16 ++++++++++++----
4 files changed, 35 insertions(+), 14 deletions(-)
diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c
index 759cb71ed1c5..7f7a563df4d9 100644
--- a/drivers/iio/light/isl29018.c
+++ b/drivers/iio/light/isl29018.c
@@ -10,6 +10,7 @@
#include <linux/i2c.h>
#include <linux/err.h>
+#include <linux/kstrtox.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/delay.h>
@@ -339,9 +340,11 @@ static ssize_t proximity_on_chip_ambient_infrared_suppression_store
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct isl29018_chip *chip = iio_priv(indio_dev);
int val;
+ int ret;
- if (kstrtoint(buf, 10, &val))
- return -EINVAL;
+ ret = kstrtoint(buf, 10, &val);
+ if (ret)
+ return ret;
if (!(val == 0 || val == 1))
return -EINVAL;
diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index 99f0b903018c..5db9591a85b9 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <linux/iio/events.h>
#include <linux/iio/iio.h>
+#include <linux/kstrtox.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
@@ -434,8 +435,9 @@ static ssize_t store_thresh_either_en(struct device *dev,
if (!als->irq)
return -EBUSY;
- if (kstrtoul(buf, 0, &enable))
- return -EINVAL;
+ ret = kstrtoul(buf, 0, &enable);
+ if (ret)
+ return ret;
int_enabled = test_bit(LM3533_ALS_FLAG_INT_ENABLED, &als->flags);
@@ -542,8 +544,9 @@ static ssize_t store_als_attr(struct device *dev,
u8 val;
int ret;
- if (kstrtou8(buf, 0, &val))
- return -EINVAL;
+ ret = kstrtou8(buf, 0, &val);
+ if (ret)
+ return ret;
switch (als_attr->type) {
case LM3533_ATTR_TYPE_TARGET:
diff --git a/drivers/iio/light/tsl2583.c b/drivers/iio/light/tsl2583.c
index 53fd423aa7ae..2d041b7530e6 100644
--- a/drivers/iio/light/tsl2583.c
+++ b/drivers/iio/light/tsl2583.c
@@ -7,10 +7,11 @@
* Copyright (c) 2016-2017 Brian Masney <masneyb@onstation.org>
*/
-#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/kstrtox.h>
#include <linux/string.h>
#include <linux/mutex.h>
#include <linux/unistd.h>
@@ -483,9 +484,12 @@ static ssize_t in_illuminance_input_target_store(struct device *dev,
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct tsl2583_chip *chip = iio_priv(indio_dev);
- int value;
+ int value, ret;
- if (kstrtoint(buf, 0, &value) || !value)
+ ret = kstrtoint(buf, 0, &value);
+ if (ret)
+ return ret;
+ if (!value)
return -EINVAL;
mutex_lock(&chip->als_mutex);
@@ -503,7 +507,10 @@ static ssize_t in_illuminance_calibrate_store(struct device *dev,
struct tsl2583_chip *chip = iio_priv(indio_dev);
int value, ret;
- if (kstrtoint(buf, 0, &value) || value != 1)
+ ret = kstrtoint(buf, 0, &value);
+ if (ret)
+ return ret;
+ if (value != 1)
return -EINVAL;
mutex_lock(&chip->als_mutex);
diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
index 4486a1d9d84d..c8a7afc65c1f 100644
--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/kstrtox.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/property.h>
@@ -951,8 +952,9 @@ static ssize_t in_illuminance0_target_input_store(struct device *dev,
u16 value;
int ret;
- if (kstrtou16(buf, 0, &value))
- return -EINVAL;
+ ret = kstrtou16(buf, 0, &value);
+ if (ret)
+ return ret;
chip->settings.als_cal_target = value;
ret = tsl2772_invoke_change(indio_dev);
@@ -970,7 +972,10 @@ static ssize_t in_illuminance0_calibrate_store(struct device *dev,
bool value;
int ret;
- if (kstrtobool(buf, &value) || !value)
+ ret = kstrtobool(buf, &value);
+ if (ret)
+ return ret;
+ if (!value)
return -EINVAL;
ret = tsl2772_als_calibrate(indio_dev);
@@ -1061,7 +1066,10 @@ static ssize_t in_proximity0_calibrate_store(struct device *dev,
bool value;
int ret;
- if (kstrtobool(buf, &value) || !value)
+ ret = kstrtobool(buf, &value);
+ if (ret)
+ return ret;
+ if (!value)
return -EINVAL;
ret = tsl2772_prox_cal(indio_dev);
--
2.50.1
next prev parent reply other threads:[~2026-08-13 7:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 7:16 [PATCH v1 0/4] iio: Unshadow error codes in ->store() Andy Shevchenko
2026-08-13 7:16 ` Andy Shevchenko [this message]
2026-08-13 7:16 ` [PATCH v1 2/4] iio: imu: inv_mpu6050: " Andy Shevchenko
2026-08-13 7:16 ` [PATCH v1 3/4] iio: chemical: sps30: " Andy Shevchenko
2026-08-13 7:16 ` [PATCH v1 4/4] iio: adc: pac1934: " Andy Shevchenko
2026-08-13 12:17 ` Marius.Cristea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813071912.2465208-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jean-baptiste.maneyrol@tdk.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marius.cristea@microchip.com \
--cc=maxwell@maxwelld.cc \
--cc=nuno.sa@analog.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tduszyns@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.