From: Mehmet Fide <mehmet.fide@gmail.com>
To: Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>
Cc: Frank Li <Frank.Li@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Stefan Agner <stefan@agner.ch>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Francesco Dolcini <francesco@dolcini.it>,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Mehmet Fide <mehmet.fide@screeningeagle.com>
Subject: [PATCH v3 0/4] ARM: dts: vf: Iris carrier board for the Colibri VF50 and VF61
Date: Thu, 13 Aug 2026 16:05:56 +0200 [thread overview]
Message-ID: <20260813140600.1824949-1-mehmet.fide@gmail.com> (raw)
From: Mehmet Fide <mehmet.fide@screeningeagle.com>
This adds a device tree for the Toradex Iris carrier board carrying the
Vybrid Colibri modules, plus two small preparatory patches for the
module-level dtsi that the i.MX Colibri variants already had.
Everything was tested on a Colibri VF50 on an Iris V1.1 running 6.18:
Ethernet, USB host and OTG, all three UARTs, i2c with the carrier RTC,
SPI, the microSD slot and the RS232 transceiver hogs.
Changes in v3, following Krzysztof's review:
- fold the Iris compatibles into the existing -on-eval enum entries
instead of adding standalone entries
- use hyphens in the newly introduced compatibles
(toradex,vf500-colibri-vf50-on-iris, toradex,vf610-colibri-vf61-on-iris)
- drop the fixed 5V regulator that only fed the VBUS regulator
- sent as a fresh thread instead of in reply to v2
Changes in v2:
- add the dt-bindings patch for the new compatibles
- describe the USB host VBUS regulator instead of hogging USBH_PEN
Mehmet Fide (4):
ARM: dts: vf-colibri: apply the EXT_IO pin group
ARM: dts: vf-colibri: name the SODIMM gpio lines
dt-bindings: arm: fsl: add the Colibri VF50 and VF61 on Iris
ARM: dts: vf: add Iris carrier board support for Colibri VF50 and VF61
.../devicetree/bindings/arm/fsl.yaml | 12 +-
arch/arm/boot/dts/nxp/vf/Makefile | 2 +
arch/arm/boot/dts/nxp/vf/vf-colibri-iris.dtsi | 117 ++++++++++++++
arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi | 153 ++++++++++++++++++
.../boot/dts/nxp/vf/vf500-colibri-iris.dts | 14 ++
.../boot/dts/nxp/vf/vf610-colibri-iris.dts | 14 ++
6 files changed, 308 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/nxp/vf/vf-colibri-iris.dtsi
create mode 100644 arch/arm/boot/dts/nxp/vf/vf500-colibri-iris.dts
create mode 100644 arch/arm/boot/dts/nxp/vf/vf610-colibri-iris.dts
base-commit: 3d6d817622b0a9721e3cc404df3469171582be13
--
2.54.0
next reply other threads:[~2026-08-13 14:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 14:05 Mehmet Fide [this message]
2026-08-13 14:05 ` [PATCH v3 1/4] ARM: dts: vf-colibri: apply the EXT_IO pin group Mehmet Fide
2026-08-13 14:05 ` [PATCH v3 2/4] ARM: dts: vf-colibri: name the SODIMM gpio lines Mehmet Fide
2026-08-13 15:20 ` Frank Li
2026-08-13 14:05 ` [PATCH v3 3/4] dt-bindings: arm: fsl: add the Colibri VF50 and VF61 on Iris Mehmet Fide
2026-08-13 14:13 ` sashiko-bot
2026-08-13 14:06 ` [PATCH v3 4/4] ARM: dts: vf: add Iris carrier board support for Colibri VF50 and VF61 Mehmet Fide
2026-08-13 14:16 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813140600.1824949-1-mehmet.fide@gmail.com \
--to=mehmet.fide@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=francesco@dolcini.it \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mehmet.fide@screeningeagle.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.