[PATCH v1] iio: accel: bma400: remove completed tasks from TODO list

[Marco Chen <marcochen.dev@gmail.com>]

Two of the four tasks in the TODO comment have been implemented.

Interrupts were added by commit ffe0ab6a9698 ("iio: accel:
bma400: Add triggered buffer support"). Support for events was added by
commit 961db2da159d ("iio: accel: bma400: Add support for single and
double tap events"), among others. The driver now has an interrupt
handler pushing IIO events, and event configuration from
read_event_config(), write_event_config(), read_event_value(), and
write_event_value().

A step count channel was also added by commit d221de60eee3 ("iio: accel:
bma400: Add separate channel for step counter").

The power management and sensor time channel TODOs remain unimplemented.

Signed-off-by: Marco Chen <marcochen.dev@gmail.com>
---
I would like to take on the remaining power management TODO. The driver
has bma400_set_power_mode() but neither bus assigns a dev_pm_ops
struct. POWER_MODE_LOW is also never entered. I don't have a BMA400 but
I would definitely buy one to develop and test on. I also have access to
a logic analyzer for testing. Is this a patch that is desirable?

 drivers/iio/accel/bma400_core.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
index 7e3cff4cca91..6bc64ca87f4b 100644
--- a/drivers/iio/accel/bma400_core.c
+++ b/drivers/iio/accel/bma400_core.c
@@ -6,8 +6,6 @@
  *
  * TODO:
  *  - Support for power management
- *  - Support events and interrupts
- *  - Create channel for step count
  *  - Create channel for sensor time
  */
 
-- 
2.55.0