All of lore.kernel.org
 help / color / mirror / Atom feed
From: Harshitha Ramamurthy <hramamurthy@google.com>
To: netdev@vger.kernel.org
Cc: joshwash@google.com, hramamurthy@google.com,
	andrew+netdev@lunn.ch,  davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com,  ast@kernel.org,
	daniel@iogearbox.net, hawk@kernel.org,  john.fastabend@gmail.com,
	sdf@fomichev.me, jordanrhee@google.com,  willemb@google.com,
	nktgrg@google.com, maolson@google.com, thostet@google.com,
	 jacob.e.keller@intel.com, przemyslaw.kitszel@intel.com,
	debarghyak@google.com,  kees@kernel.org, bpf@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next v4 02/15] gve: refactor initialization with helper functions
Date: Fri, 14 Aug 2026 02:13:52 +0000	[thread overview]
Message-ID: <20260814021406.3044324-3-hramamurthy@google.com> (raw)
In-Reply-To: <20260814021406.3044324-1-hramamurthy@google.com>

In the interest of commonizing code, refactor gve_probe()
and gve_init_priv() with a few helper functions that can
be expanded and utilized in upcoming patches that add the
mailbox ABI to the driver. The helper functions are:

- gve_set_num_ntfy_blks()
- gve_set_num_queues()

Reorder code to combine lines that accomplish a similar objective
like setting defaults. Move setting HW-GRO and UDP GSO support out
of an Adminq method into gve_init_priv().

These changes are just code movement, no functional change.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
v4:
- move the new functions to gve_adminq.c since that will be their final
  home in the following patches (Przemek Kitszel)
v2:
- ensure to call verify driver compatibility in reset path

 drivers/net/ethernet/google/gve/gve_adminq.c | 49 ++++++++++++++---
 drivers/net/ethernet/google/gve/gve_adminq.h |  2 +
 drivers/net/ethernet/google/gve/gve_main.c   | 58 +++++++-------------
 3 files changed, 62 insertions(+), 47 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 70ffed8b52c3..fe0dedfb25d7 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1117,14 +1117,6 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 
 	gve_set_default_rss_sizes(priv);
 
-	/* DQO supports HW-GRO and UDP_GSO */
-	if (gve_is_dqo(priv)) {
-		u64 additional_features = NETIF_F_GRO_HW | NETIF_F_GSO_UDP_L4;
-
-		priv->dev->hw_features |= additional_features;
-		priv->dev->features |= additional_features;
-	}
-
 	priv->max_registered_pages =
 				be64_to_cpu(descriptor->max_registered_pages);
 	mtu = be16_to_cpu(descriptor->mtu);
@@ -1600,3 +1592,44 @@ int gve_adminq_query_rss_config(struct gve_priv *priv, struct ethtool_rxfh_param
 	dma_pool_free(priv->adminq_pool, descriptor, descriptor_bus);
 	return err;
 }
+
+int gve_set_num_ntfy_blks(struct gve_priv *priv)
+{
+	int num_ntfy;
+
+	num_ntfy = pci_msix_vec_count(priv->pdev);
+	if (num_ntfy <= 0) {
+		dev_err(&priv->pdev->dev,
+			"could not count MSI-x vectors: err=%d\n", num_ntfy);
+		return num_ntfy;
+	} else if (num_ntfy < GVE_MIN_MSIX) {
+		dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
+			GVE_MIN_MSIX, num_ntfy);
+		return -EINVAL;
+	}
+
+	/* gvnic has one Notification Block per MSI-x vector, except for the
+	 * management vector
+	 */
+	priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
+	priv->mgmt_msix_idx = priv->num_ntfy_blks;
+
+	return 0;
+}
+
+void gve_set_num_queues(struct gve_priv *priv)
+{
+	priv->tx_cfg.max_queues =
+		min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
+	priv->rx_cfg.max_queues =
+		min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
+
+	priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
+	priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
+	if (priv->default_num_queues > 0) {
+		priv->tx_cfg.num_queues = min_t(int, priv->default_num_queues,
+						priv->tx_cfg.num_queues);
+		priv->rx_cfg.num_queues = min_t(int, priv->default_num_queues,
+						priv->rx_cfg.num_queues);
+	}
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 8e80f36116ec..82b52424a63f 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -656,5 +656,7 @@ int gve_adminq_report_nic_ts(struct gve_priv *priv,
 struct gve_ptype_lut;
 int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
 				 struct gve_ptype_lut *ptype_lut);
+int gve_set_num_ntfy_blks(struct gve_priv *priv);
+void gve_set_num_queues(struct gve_priv *priv);
 
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 30bf6df4ebc5..37e6205e2eef 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2400,7 +2400,6 @@ static const struct xdp_metadata_ops gve_xdp_metadata_ops = {
 
 static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 {
-	int num_ntfy;
 	int err;
 
 	/* Set up the adminq */
@@ -2431,57 +2430,38 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 			"Could not get device information: err=%d\n", err);
 		goto err;
 	}
-	priv->dev->mtu = priv->dev->max_mtu;
-	num_ntfy = pci_msix_vec_count(priv->pdev);
-	if (num_ntfy <= 0) {
+
+	err = gve_set_num_ntfy_blks(priv);
+	if (err) {
 		dev_err(&priv->pdev->dev,
-			"could not count MSI-x vectors: err=%d\n", num_ntfy);
-		err = num_ntfy;
+			"Could not setup notify blocks: err=%d\n", err);
 		goto err;
-	} else if (num_ntfy < GVE_MIN_MSIX) {
-		dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
-			GVE_MIN_MSIX, num_ntfy);
-		err = -EINVAL;
-		goto err;
-	}
-
-	/* Big TCP is only supported on DQO */
-	if (!gve_is_gqi(priv))
-		netif_set_tso_max_size(priv->dev, GVE_DQO_TX_MAX);
-
-	priv->rx_copybreak = GVE_DEFAULT_RX_COPYBREAK;
-	/* gvnic has one Notification Block per MSI-x vector, except for the
-	 * management vector
-	 */
-	priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
-	priv->mgmt_msix_idx = priv->num_ntfy_blks;
-	priv->numa_node = dev_to_node(&priv->pdev->dev);
-
-	priv->tx_cfg.max_queues =
-		min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
-	priv->rx_cfg.max_queues =
-		min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
-
-	priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
-	priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
-	if (priv->default_num_queues > 0) {
-		priv->tx_cfg.num_queues = min_t(int, priv->default_num_queues,
-						priv->tx_cfg.num_queues);
-		priv->rx_cfg.num_queues = min_t(int, priv->default_num_queues,
-						priv->rx_cfg.num_queues);
 	}
-	priv->tx_cfg.num_xdp_queues = 0;
 
+	gve_set_num_queues(priv);
 	dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
 		 priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
 	dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
 		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
 
-	if (!gve_is_gqi(priv)) {
+	if (gve_is_dqo(priv)) {
+		/* DQO supports HW-GRO and UDP_GSO */
+		u64 additional_features = NETIF_F_GRO_HW | NETIF_F_GSO_UDP_L4;
+
+		priv->dev->hw_features |= additional_features;
+		priv->dev->features |= additional_features;
+
 		priv->tx_coalesce_usecs = GVE_TX_IRQ_RATELIMIT_US_DQO;
 		priv->rx_coalesce_usecs = GVE_RX_IRQ_RATELIMIT_US_DQO;
+
+		/* Big TCP is only supported on DQO */
+		netif_set_tso_max_size(priv->dev, GVE_DQO_TX_MAX);
 	}
 
+	priv->dev->mtu = priv->dev->max_mtu;
+	priv->numa_node = dev_to_node(&priv->pdev->dev);
+	priv->tx_cfg.num_xdp_queues = 0;
+	priv->rx_copybreak = GVE_DEFAULT_RX_COPYBREAK;
 	priv->ts_config.tx_type = HWTSTAMP_TX_OFF;
 	priv->ts_config.rx_filter = HWTSTAMP_FILTER_NONE;
 
-- 
2.55.0.691.gc56d675ccc-goog


  parent reply	other threads:[~2026-08-14  2:14 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-14  2:13 [PATCH net-next v4 00/15] gve: AdminQ mode related refactors Harshitha Ramamurthy
2026-08-14  2:13 ` [PATCH net-next v4 01/15] gve: don't pass in unused parameter to gve_adminq_free Harshitha Ramamurthy
2026-08-15  2:14   ` sashiko-bot
2026-08-14  2:13 ` Harshitha Ramamurthy [this message]
2026-08-15  2:14   ` [PATCH net-next v4 02/15] gve: refactor initialization with helper functions sashiko-bot
2026-08-14  2:13 ` [PATCH net-next v4 03/15] gve: add a few helper functions to set device properties Harshitha Ramamurthy
2026-08-14  2:13 ` [PATCH net-next v4 04/15] gve: add struct gve_device_info to hold " Harshitha Ramamurthy
2026-08-15  2:14   ` sashiko-bot
2026-08-14  2:13 ` [PATCH net-next v4 05/15] gve: introduce control plane operations structure Harshitha Ramamurthy
2026-08-15  2:14   ` sashiko-bot
2026-08-14  2:13 ` [PATCH net-next v4 06/15] gve: introduce ctrl ops to set vectors and Qs Harshitha Ramamurthy
2026-08-15  2:14   ` sashiko-bot
2026-08-14  2:13 ` [PATCH net-next v4 07/15] gve: introduce gve_adminq_get_device_properties() Harshitha Ramamurthy
2026-08-14  2:13 ` [PATCH net-next v4 08/15] gve: refactor gve_init_priv for reset path Harshitha Ramamurthy
2026-08-15  2:14   ` sashiko-bot
2026-08-14  2:13 ` [PATCH net-next v4 09/15] gve: simplify reset logic Harshitha Ramamurthy
2026-08-15  2:14   ` sashiko-bot
2026-08-14  2:14 ` [PATCH net-next v4 10/15] gve: add gve_ctrl_ops for gve initialization/teardown sequences Harshitha Ramamurthy
2026-08-14  2:14 ` [PATCH net-next v4 11/15] gve: split up notify block allocation and setup paths Harshitha Ramamurthy
2026-08-14  2:14 ` [PATCH net-next v4 12/15] gve: introduce new methods to handle IRQ doorbells Harshitha Ramamurthy
2026-08-14  2:14 ` [PATCH net-next v4 13/15] gve: setup and teardown management interrupts Harshitha Ramamurthy
2026-08-14  2:14 ` [PATCH net-next v4 14/15] gve: add ctrl ops to for queue operations Harshitha Ramamurthy
2026-08-15  2:14   ` sashiko-bot
2026-08-14  2:14 ` [PATCH net-next v4 15/15] gve: add link status/speed ctrl ops Harshitha Ramamurthy
2026-08-15  2:14   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260814021406.3044324-3-hramamurthy@google.com \
    --to=hramamurthy@google.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=debarghyak@google.com \
    --cc=edumazet@google.com \
    --cc=hawk@kernel.org \
    --cc=jacob.e.keller@intel.com \
    --cc=john.fastabend@gmail.com \
    --cc=jordanrhee@google.com \
    --cc=joshwash@google.com \
    --cc=kees@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maolson@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=nktgrg@google.com \
    --cc=pabeni@redhat.com \
    --cc=przemyslaw.kitszel@intel.com \
    --cc=sdf@fomichev.me \
    --cc=thostet@google.com \
    --cc=willemb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.