From: Ihor Solodrai <ihor.solodrai@linux.dev>
To: Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
Ingo Molnar <mingo@redhat.com>, Thomas Gleixner <tglx@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>,
Andrii Nakryiko <andrii@kernel.org>,
Andrey Ryabinin <ryabinin.a.a@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
"H . Peter Anvin" <hpa@zytor.com>,
Andrey Konovalov <andreyknvl@gmail.com>,
linux-kernel@vger.kernel.org, x86@kernel.org,
bpf@vger.kernel.org, kasan-dev@googlegroups.com,
linux-mm@kvack.org, kernel-team@meta.com
Subject: [PATCH v2 1/5] x86/cpu: Factor init_cpu_info() out of identify_cpu()
Date: Fri, 14 Aug 2026 16:51:30 -0700 [thread overview]
Message-ID: <20260814235134.3461435-2-ihor.solodrai@linux.dev> (raw)
In-Reply-To: <20260814235134.3461435-1-ihor.solodrai@linux.dev>
identify_cpu() unconditionally resets the struct cpuinfo_x86 fields to
their default values and clears the capability arrays with memset()
before rescanning the CPU to fill it in again.
However the boot CPU capabilities have already been scanned by
early_identify_cpu(), with interrupts disabled.
Introduce init_cpu_info() helper in preparation for letting the
callers decide whether the reset is needed.
early_identify_cpu() starts using the helper in the next patch.
No functional changes.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
---
arch/x86/kernel/cpu/common.c | 51 ++++++++++++++++++++----------------
1 file changed, 28 insertions(+), 23 deletions(-)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index a3df21d26460..bb4525523222 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1772,6 +1772,32 @@ static void __init cpu_parse_early_param(void)
}
}
+static void init_cpu_info(struct cpuinfo_x86 *c)
+{
+ c->x86_cache_size = 0;
+ c->x86_vendor = X86_VENDOR_UNKNOWN;
+ c->x86_model = c->x86_stepping = 0; /* So far unknown... */
+ c->x86_vendor_id[0] = '\0'; /* Unset */
+ c->x86_model_id[0] = '\0'; /* Unset */
+#ifdef CONFIG_X86_64
+ c->x86_clflush_size = 64;
+ c->x86_phys_bits = 36;
+ c->x86_virt_bits = 48;
+#else
+ c->cpuid_level = -1; /* CPUID not detected */
+ c->x86_clflush_size = 32;
+ c->x86_phys_bits = 32;
+ c->x86_virt_bits = 32;
+#endif
+ c->x86_cache_alignment = c->x86_clflush_size;
+ memset(&c->x86_capability, 0, sizeof(c->x86_capability));
+ memset(&c->cpuid, 0, sizeof(c->cpuid));
+#ifdef CONFIG_X86_VMX_FEATURE_NAMES
+ memset(&c->vmx_capability, 0, sizeof(c->vmx_capability));
+#endif
+ c->extended_cpuid_level = 0;
+}
+
/*
* Do minimum CPU detection early.
* Fields really needed: vendor, cpuid_level, family, model, mask,
@@ -1956,8 +1982,6 @@ void check_null_seg_clears_base(struct cpuinfo_x86 *c)
static void generic_identify(struct cpuinfo_x86 *c)
{
- c->extended_cpuid_level = 0;
-
if (!cpuid_feature())
identify_cpu_without_cpuid(c);
@@ -2001,27 +2025,8 @@ static void identify_cpu(struct cpuinfo_x86 *c)
int i;
c->loops_per_jiffy = loops_per_jiffy;
- c->x86_cache_size = 0;
- c->x86_vendor = X86_VENDOR_UNKNOWN;
- c->x86_model = c->x86_stepping = 0; /* So far unknown... */
- c->x86_vendor_id[0] = '\0'; /* Unset */
- c->x86_model_id[0] = '\0'; /* Unset */
-#ifdef CONFIG_X86_64
- c->x86_clflush_size = 64;
- c->x86_phys_bits = 36;
- c->x86_virt_bits = 48;
-#else
- c->cpuid_level = -1; /* CPUID not detected */
- c->x86_clflush_size = 32;
- c->x86_phys_bits = 32;
- c->x86_virt_bits = 32;
-#endif
- c->x86_cache_alignment = c->x86_clflush_size;
- memset(&c->x86_capability, 0, sizeof(c->x86_capability));
- memset(&c->cpuid, 0, sizeof(c->cpuid));
-#ifdef CONFIG_X86_VMX_FEATURE_NAMES
- memset(&c->vmx_capability, 0, sizeof(c->vmx_capability));
-#endif
+
+ init_cpu_info(c);
generic_identify(c);
--
2.55.0
next prev parent reply other threads:[~2026-08-14 23:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-14 23:51 [PATCH v2 0/5] x86/cpu: Refactor identify_cpu() Ihor Solodrai
2026-08-14 23:51 ` Ihor Solodrai [this message]
2026-08-14 23:51 ` [PATCH v2 2/5] x86/cpu: Initialize boot CPU cpuinfo defaults early Ihor Solodrai
2026-08-14 23:51 ` [PATCH v2 3/5] x86/cpu: Inline generic_identify() into identify_cpu() Ihor Solodrai
2026-08-14 23:51 ` [PATCH v2 4/5] x86/cpu: Move 32-bit SEP setup " Ihor Solodrai
2026-08-14 23:51 ` [PATCH v2 5/5] x86/cpu: Don't transiently clear the boot CPU's capabilities Ihor Solodrai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260814235134.3461435-2-ihor.solodrai@linux.dev \
--to=ihor.solodrai@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=andreyknvl@gmail.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bp@alien8.de \
--cc=bpf@vger.kernel.org \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=kasan-dev@googlegroups.com \
--cc=kernel-team@meta.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@redhat.com \
--cc=ryabinin.a.a@gmail.com \
--cc=tglx@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.