From: liujie5@linkdatatechnology.com
To: stephen@networkplumber.org
Cc: dev@dpdk.org, Jie Liu <liujie5@linkdatatechnology.com>
Subject: [PATCH v2 06/13] net/sxe2: refactor flow tunnel port handling
Date: Sun, 16 Aug 2026 10:52:26 +0800 [thread overview]
Message-ID: <20260816025233.2727226-7-liujie5@linkdatatechnology.com> (raw)
In-Reply-To: <20260816025233.2727226-1-liujie5@linkdatatechnology.com>
From: Jie Liu <liujie5@linkdatatechnology.com>
This patch refactors flow tunnel port handling and adds support for
PF bond devices:
- Refactor tunnel port functions from pattern module to flow module:
* Move sxe2_flow_parse_pattern_ipip from sxe2_flow_parse_pattern.c
* Move sxe2_flow_add_udp_tunnel_port from sxe2_flow_parse_pattern.c
* Move sxe2_flow_add_tunnel_port from public API to static function
* Remove public function declaration from header file
* Keep functions internal to flow module for better encapsulation
- Add PF bond device support in flow source split processing:
* Add bond_member_cnt field to sxe2_adapter structure
* Handle SXE2_DEV_T_PF_BOND device type in sxe2_flow_src_split_proc
* Populate flow_src_vsi for all bond members
- Enhance ACL engine support in flow actions:
* Add ACL engine support in flow action checks
* Allow PASSTHRU action for ACL engine
Signed-off-by: Jie Liu <liujie5@linkdatatechnology.com>
---
drivers/net/sxe2/sxe2_ethdev.h | 1 +
drivers/net/sxe2/sxe2_flow.c | 144 ++++++++++++++++++++-
drivers/net/sxe2/sxe2_flow_parse_action.c | 18 ++-
drivers/net/sxe2/sxe2_flow_parse_pattern.c | 113 ----------------
drivers/net/sxe2/sxe2_flow_parse_pattern.h | 7 -
5 files changed, 151 insertions(+), 132 deletions(-)
diff --git a/drivers/net/sxe2/sxe2_ethdev.h b/drivers/net/sxe2/sxe2_ethdev.h
index d0a0f41ceb..36f4cc9353 100644
--- a/drivers/net/sxe2/sxe2_ethdev.h
+++ b/drivers/net/sxe2/sxe2_ethdev.h
@@ -340,6 +340,7 @@ struct sxe2_adapter {
bool flow_isolate_cfg;
uint16_t dev_port_id;
bool is_dev_repr;
+ uint16_t bond_member_cnt;
uint64_t cap_flags;
enum sxe2_dev_type dev_type;
struct rte_ether_addr mac_addr;
diff --git a/drivers/net/sxe2/sxe2_flow.c b/drivers/net/sxe2/sxe2_flow.c
index 3cf98dd294..af85cb0d2b 100644
--- a/drivers/net/sxe2/sxe2_flow.c
+++ b/drivers/net/sxe2/sxe2_flow.c
@@ -285,14 +285,16 @@ static int32_t sxe2_flow_meta_proc(struct rte_eth_dev *dev,
attr, "Only support priority 0.");
ret = -rte_errno;
goto l_end;
- } else if (!adapter->switchdev_info.is_switchdev) {
- PMD_LOG_ERR(DRV, "Legacy mode only support priority 0.");
- rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
- attr, "Legacy mode only priority 0.");
- ret = -rte_errno;
- goto l_end;
} else {
- flow->meta.flow_prio = attr->priority;
+ if (!adapter->switchdev_info.is_switchdev) {
+ PMD_LOG_ERR(DRV, "Legacy mode only support priority 0.");
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+ attr, "Legacy mode only priority 0.");
+ ret = -rte_errno;
+ goto l_end;
+ } else {
+ flow->meta.flow_prio = attr->priority;
+ }
}
}
@@ -347,6 +349,21 @@ static int32_t sxe2_flow_src_split_proc(struct rte_eth_dev *dev,
flow_src_vsi[SXE2_MAX_DRV_TYPE_KERNEL][idx] = UINT16_MAX;
}
+ if (adapter->dev_type == SXE2_DEV_T_PF_BOND) {
+ flow_bond_num = adapter->bond_member_cnt;
+ for (idx = 0; idx < flow_bond_num; idx++) {
+ flow_src_vsi[SXE2_MAX_DRV_TYPE_DPDK][idx] =
+ adapter->vsi_ctxt.bond_member_dpdk_vsi_id[idx];
+ flow_src_vsi[SXE2_MAX_DRV_TYPE_KERNEL][idx] =
+ adapter->vsi_ctxt.bond_member_kernel_vsi_id[idx];
+ }
+ } else {
+ flow_src_vsi[SXE2_MAX_DRV_TYPE_DPDK][0] =
+ adapter->vsi_ctxt.dpdk_vsi_id;
+ flow_src_vsi[SXE2_MAX_DRV_TYPE_KERNEL][0] =
+ adapter->vsi_ctxt.kernel_vsi_id;
+ }
+
flow_src_vsi[SXE2_MAX_DRV_TYPE_DPDK][0] = adapter->vsi_ctxt.dpdk_vsi_id;
flow_src_vsi[SXE2_MAX_DRV_TYPE_KERNEL][0] = adapter->vsi_ctxt.kernel_vsi_id;
if (flow->engine_type == SXE2_FLOW_ENGINE_FNAV ||
@@ -550,6 +567,119 @@ int32_t sxe2_flow_init_udp_tunnel_port(struct rte_eth_dev *dev)
return ret;
}
+static int32_t sxe2_flow_add_udp_tunnel_port(struct sxe2_adapter *adapter,
+ enum sxe2_flow_udp_tunnel_protocol proto,
+ struct sxe2_flow *flow,
+ BITMAP_TYPE *flow_type)
+{
+ int32_t ret = 0;
+ uint16_t tun_port;
+
+ tun_port = adapter->flow_ctxt.tunnel_port_list[proto];
+ if (tun_port == 0xffff || tun_port == 0) {
+ ret = -EINVAL;
+ PMD_LOG_ERR(DRV, "UDP tunnel port not initialized, proto: %d", proto);
+ goto l_end;
+ }
+ if (!sxe2_test_bit(SXE2_EXPANSION_OUTER_UDP, flow_type)) {
+ ret = -EINVAL;
+ PMD_LOG_ERR(DRV, "UDP must be over tunnel");
+ goto l_end;
+ }
+ sxe2_set_bit(SXE2_FLOW_FLD_ID_UDP_DST_PORT, flow->pattern_outer.map_spec);
+ flow->pattern_outer.item_spec.udp.dest = rte_cpu_to_be_16(tun_port);
+l_end:
+ return ret;
+}
+
+static int32_t sxe2_flow_parse_pattern_ipip(struct sxe2_flow *flow, BITMAP_TYPE *flow_type)
+{
+ sxe2_set_bit(SXE2_EXPANSION_IPIP, flow_type);
+ if (sxe2_test_bit(SXE2_EXPANSION_OUTER_IPV4, flow_type)) {
+ sxe2_set_bit(SXE2_FLOW_FLD_ID_IPV4_PROT, flow->pattern_outer.map_spec);
+ if (sxe2_test_bit(SXE2_EXPANSION_IPV4, flow_type))
+ flow->pattern_outer.item_spec.ipv4.protocol = SXE2_FLOW_IP_PROTOCOL_IPV4;
+ if (sxe2_test_bit(SXE2_EXPANSION_IPV6, flow_type))
+ flow->pattern_outer.item_spec.ipv4.protocol = SXE2_FLOW_IP_PROTOCOL_IPV6;
+ }
+ if (sxe2_test_bit(SXE2_EXPANSION_OUTER_IPV6, flow_type)) {
+ sxe2_set_bit(SXE2_FLOW_FLD_ID_IPV6_PROT, flow->pattern_outer.map_spec);
+ if (sxe2_test_bit(SXE2_EXPANSION_ETH, flow_type)) {
+ flow->pattern_outer.item_spec.ipv6.nexthdr = SXE2_FLOW_IP_PROTOCOL_ETH;
+ } else {
+ if (sxe2_test_bit(SXE2_EXPANSION_IPV4, flow_type))
+ flow->pattern_outer.item_spec.ipv6.nexthdr =
+ SXE2_FLOW_IP_PROTOCOL_IPV4;
+ if (sxe2_test_bit(SXE2_EXPANSION_IPV6, flow_type))
+ flow->pattern_outer.item_spec.ipv6.nexthdr =
+ SXE2_FLOW_IP_PROTOCOL_IPV6;
+ }
+ }
+ return 0;
+}
+
+static int32_t sxe2_flow_add_tunnel_port(struct rte_eth_dev *dev,
+ struct rte_flow_error *error,
+ struct sxe2_flow *flow, BITMAP_TYPE *flow_type,
+ enum sxe2_flow_tunnel_type tunnel_type)
+{
+ int32_t ret = 0;
+ enum sxe2_flow_udp_tunnel_protocol proto = SXE2_FLOW_UDP_TUNNEL_MAX;
+ struct sxe2_adapter *adapter = SXE2_DEV_PRIVATE_TO_ADAPTER(dev);
+ struct sxe2_flow_pattern *pattern = &flow->pattern_outer;
+ switch (tunnel_type) {
+ case SXE2_FLOW_TUNNEL_TYPE_VXLAN:
+ if (sxe2_test_bit(SXE2_EXPANSION_ETH, flow_type)) {
+ proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_VXLAN;
+ } else if (sxe2_test_bit(SXE2_EXPANSION_IPV4, flow_type) ||
+ sxe2_test_bit(SXE2_EXPANSION_IPV6, flow_type)) {
+ proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_VXLAN_GPE;
+ }
+ break;
+ case SXE2_FLOW_TUNNEL_TYPE_GTPU:
+ proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_GTP_U;
+ break;
+ case SXE2_FLOW_TUNNEL_TYPE_GENEVE:
+ proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_GENEVE;
+ break;
+ case SXE2_FLOW_TUNNEL_TYPE_GRE:
+ if (sxe2_test_bit(SXE2_EXPANSION_OUTER_UDP, flow_type)) {
+ proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_NVGRE;
+ } else {
+ if (sxe2_test_bit(SXE2_EXPANSION_OUTER_IPV4, flow_type)) {
+ pattern->item_spec.ipv4.protocol = SXE2_FLOW_IP_PROTOCOL_GRE;
+ sxe2_set_bit(SXE2_FLOW_FLD_ID_IPV4_PROT, pattern->map_spec);
+ }
+ if (sxe2_test_bit(SXE2_EXPANSION_OUTER_IPV6, flow_type)) {
+ pattern->item_spec.ipv6.nexthdr = SXE2_FLOW_IP_PROTOCOL_GRE;
+ sxe2_set_bit(SXE2_FLOW_FLD_ID_IPV6_PROT, pattern->map_spec);
+ }
+ }
+ break;
+ case SXE2_FLOW_TUNNEL_TYPE_IPIP:
+ ret = sxe2_flow_parse_pattern_ipip(flow, flow_type);
+ break;
+ default:
+ break;
+ }
+ if (proto != SXE2_FLOW_UDP_TUNNEL_MAX) {
+ ret = sxe2_flow_add_udp_tunnel_port(adapter, proto, flow, flow_type);
+ if (ret != 0) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ NULL, "Failed to add udp port for tunnel.");
+ PMD_LOG_ERR(DRV, "Failed to add udp port for tunnel, ret %d.", ret);
+ goto l_end;
+ }
+ }
+ if (tunnel_type != SXE2_FLOW_TUNNEL_TYPE_NONE) {
+ if (!sxe2_test_bit(SXE2_EXPANSION_OUTER_UDP, flow_type))
+ sxe2_set_bit(SXE2_FLOW_HDR_IPV_OTHER, pattern->hdrs);
+ }
+l_end:
+ return ret;
+}
+
static int32_t sxe2_flowlist_add_tunnel_port(struct rte_eth_dev *dev,
struct rte_flow *flow_list,
struct rte_flow_error *error)
diff --git a/drivers/net/sxe2/sxe2_flow_parse_action.c b/drivers/net/sxe2/sxe2_flow_parse_action.c
index cdd6fcfdcd..867d90ae1d 100644
--- a/drivers/net/sxe2/sxe2_flow_parse_action.c
+++ b/drivers/net/sxe2/sxe2_flow_parse_action.c
@@ -25,15 +25,21 @@ static int32_t sxe2_flow_check_rss_action_attr(const struct rte_flow_action_rss
goto l_end;
}
- if (rss->level > 2)
+ if (rss->level > 2) {
rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"RSS level is could not be greater than 2");
- if (rss->key_len)
+ goto l_end;
+ }
+ if (rss->key_len) {
rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"a nonzero RSS key_len is not supported");
- if (rss->queue_num)
+ goto l_end;
+ }
+ if (rss->queue_num) {
rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"a non-NULL RSS queue is not supported");
+ goto l_end;
+ }
ret = 0;
l_end:
return ret;
@@ -953,7 +959,8 @@ static int32_t sxe2_flow_check_actions(struct rte_eth_dev *dev __rte_unused, str
}
}
- if (engine_type == SXE2_FLOW_ENGINE_FNAV) {
+ if (engine_type == SXE2_FLOW_ENGINE_FNAV ||
+ engine_type == SXE2_FLOW_ENGINE_ACL) {
if (vsi_num) {
flow->action.q_region.q_index = 0;
flow->action.q_region.region = 7;
@@ -988,7 +995,8 @@ int32_t sxe2_flow_parse_action(struct rte_eth_dev *dev,
case RTE_FLOW_ACTION_TYPE_VOID:
break;
case RTE_FLOW_ACTION_TYPE_PASSTHRU:
- if (engine_type == SXE2_FLOW_ENGINE_FNAV) {
+ if (engine_type == SXE2_FLOW_ENGINE_FNAV ||
+ engine_type == SXE2_FLOW_ENGINE_ACL) {
sxe2_set_bit(SXE2_FLOW_ACTION_PASSTHRU, flow->action.act_types);
action_num[SXE2_FLOW_ACTION_PASSTHRU]++;
} else {
diff --git a/drivers/net/sxe2/sxe2_flow_parse_pattern.c b/drivers/net/sxe2/sxe2_flow_parse_pattern.c
index f5bf8922c6..189abb1a33 100644
--- a/drivers/net/sxe2/sxe2_flow_parse_pattern.c
+++ b/drivers/net/sxe2/sxe2_flow_parse_pattern.c
@@ -1637,119 +1637,6 @@ static int32_t sxe2_flow_parse_pattern_vxlan_gpe(const struct rte_flow_item *ite
return ret;
}
-static int32_t sxe2_flow_parse_pattern_ipip(struct sxe2_flow *flow, BITMAP_TYPE *flow_type)
-{
- sxe2_set_bit(SXE2_EXPANSION_IPIP, flow_type);
- if (sxe2_test_bit(SXE2_EXPANSION_OUTER_IPV4, flow_type)) {
- sxe2_set_bit(SXE2_FLOW_FLD_ID_IPV4_PROT, flow->pattern_outer.map_spec);
- if (sxe2_test_bit(SXE2_EXPANSION_IPV4, flow_type))
- flow->pattern_outer.item_spec.ipv4.protocol = SXE2_FLOW_IP_PROTOCOL_IPV4;
- if (sxe2_test_bit(SXE2_EXPANSION_IPV6, flow_type))
- flow->pattern_outer.item_spec.ipv4.protocol = SXE2_FLOW_IP_PROTOCOL_IPV6;
- }
- if (sxe2_test_bit(SXE2_EXPANSION_OUTER_IPV6, flow_type)) {
- sxe2_set_bit(SXE2_FLOW_FLD_ID_IPV6_PROT, flow->pattern_outer.map_spec);
- if (sxe2_test_bit(SXE2_EXPANSION_ETH, flow_type)) {
- flow->pattern_outer.item_spec.ipv6.nexthdr = SXE2_FLOW_IP_PROTOCOL_ETH;
- } else {
- if (sxe2_test_bit(SXE2_EXPANSION_IPV4, flow_type))
- flow->pattern_outer.item_spec.ipv6.nexthdr =
- SXE2_FLOW_IP_PROTOCOL_IPV4;
- if (sxe2_test_bit(SXE2_EXPANSION_IPV6, flow_type))
- flow->pattern_outer.item_spec.ipv6.nexthdr =
- SXE2_FLOW_IP_PROTOCOL_IPV6;
- }
- }
- return 0;
-}
-
-static int32_t sxe2_flow_add_udp_tunnel_port(struct sxe2_adapter *adapter,
- enum sxe2_flow_udp_tunnel_protocol proto,
- struct sxe2_flow *flow,
- BITMAP_TYPE *flow_type)
-{
- int32_t ret = 0;
- uint16_t tun_port;
-
- tun_port = adapter->flow_ctxt.tunnel_port_list[proto];
- if (tun_port == 0xffff || tun_port == 0) {
- ret = -EINVAL;
- PMD_LOG_ERR(DRV, "UDP tunnel port not initialized, proto: %d", proto);
- goto l_end;
- }
- if (!sxe2_test_bit(SXE2_EXPANSION_OUTER_UDP, flow_type)) {
- ret = -EINVAL;
- PMD_LOG_ERR(DRV, "UDP must be over tunnel");
- goto l_end;
- }
- sxe2_set_bit(SXE2_FLOW_FLD_ID_UDP_DST_PORT, flow->pattern_outer.map_spec);
- flow->pattern_outer.item_spec.udp.dest = rte_cpu_to_be_16(tun_port);
-l_end:
- return ret;
-}
-
-int32_t sxe2_flow_add_tunnel_port(struct rte_eth_dev *dev,
- struct rte_flow_error *error,
- struct sxe2_flow *flow, BITMAP_TYPE *flow_type,
- enum sxe2_flow_tunnel_type tunnel_type)
-{
- int32_t ret = 0;
- enum sxe2_flow_udp_tunnel_protocol proto = SXE2_FLOW_UDP_TUNNEL_MAX;
- struct sxe2_adapter *adapter = SXE2_DEV_PRIVATE_TO_ADAPTER(dev);
- struct sxe2_flow_pattern *pattern = &flow->pattern_outer;
- switch (tunnel_type) {
- case SXE2_FLOW_TUNNEL_TYPE_VXLAN:
- if (sxe2_test_bit(SXE2_EXPANSION_ETH, flow_type)) {
- proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_VXLAN;
- } else if (sxe2_test_bit(SXE2_EXPANSION_IPV4, flow_type) ||
- sxe2_test_bit(SXE2_EXPANSION_IPV6, flow_type)) {
- proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_VXLAN_GPE;
- }
- break;
- case SXE2_FLOW_TUNNEL_TYPE_GTPU:
- proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_GTP_U;
- break;
- case SXE2_FLOW_TUNNEL_TYPE_GENEVE:
- proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_GENEVE;
- break;
- case SXE2_FLOW_TUNNEL_TYPE_GRE:
- if (sxe2_test_bit(SXE2_EXPANSION_OUTER_UDP, flow_type)) {
- proto = SXE2_FLOW_UDP_TUNNEL_PROTOCOL_NVGRE;
- } else {
- if (sxe2_test_bit(SXE2_EXPANSION_OUTER_IPV4, flow_type)) {
- pattern->item_spec.ipv4.protocol = SXE2_FLOW_IP_PROTOCOL_GRE;
- sxe2_set_bit(SXE2_FLOW_FLD_ID_IPV4_PROT, pattern->map_spec);
- }
- if (sxe2_test_bit(SXE2_EXPANSION_OUTER_IPV6, flow_type)) {
- pattern->item_spec.ipv6.nexthdr = SXE2_FLOW_IP_PROTOCOL_GRE;
- sxe2_set_bit(SXE2_FLOW_FLD_ID_IPV6_PROT, pattern->map_spec);
- }
- }
- break;
- case SXE2_FLOW_TUNNEL_TYPE_IPIP:
- ret = sxe2_flow_parse_pattern_ipip(flow, flow_type);
- break;
- default:
- break;
- }
- if (proto != SXE2_FLOW_UDP_TUNNEL_MAX) {
- ret = sxe2_flow_add_udp_tunnel_port(adapter, proto, flow, flow_type);
- if (ret != 0) {
- rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM,
- NULL, "Failed to add udp port for tunnel.");
- PMD_LOG_ERR(DRV, "Failed to add udp port for tunnel, ret %d.", ret);
- goto l_end;
- }
- }
- if (tunnel_type != SXE2_FLOW_TUNNEL_TYPE_NONE) {
- if (!sxe2_test_bit(SXE2_EXPANSION_OUTER_UDP, flow_type))
- sxe2_set_bit(SXE2_FLOW_HDR_IPV_OTHER, pattern->hdrs);
- }
-l_end:
- return ret;
-}
-
struct sxe2_flow_parse_pattern_ops sxe2_flow_parse_pattern_list[] = {
[SXE2_EXPANSION_OUTER_ETH] = {
.is_inner = false,
diff --git a/drivers/net/sxe2/sxe2_flow_parse_pattern.h b/drivers/net/sxe2/sxe2_flow_parse_pattern.h
index 8442c35cae..6872a767dd 100644
--- a/drivers/net/sxe2/sxe2_flow_parse_pattern.h
+++ b/drivers/net/sxe2/sxe2_flow_parse_pattern.h
@@ -36,11 +36,4 @@ int32_t sxe2_flow_parse_pattern(struct rte_eth_dev *dev,
const struct rte_flow_item patterns[],
struct rte_flow_error *error,
struct sxe2_flow *flow);
-
-int32_t sxe2_flow_add_tunnel_port(struct rte_eth_dev *dev,
- struct rte_flow_error *error,
- struct sxe2_flow *flow,
- BITMAP_TYPE *flow_type,
- enum sxe2_flow_tunnel_type tunnel_type);
-
#endif /* SXE2_FLOW_PARSE_PATTERN_H_ */
--
2.52.0
next prev parent reply other threads:[~2026-08-16 2:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-16 2:52 [PATCH v2 00/13] driver/sxe2: fix bugs liujie5
2026-08-16 2:52 ` [PATCH v2 01/13] net/sxe2: add Rx queue buffer split fill support liujie5
2026-08-16 2:52 ` [PATCH v2 02/13] net/sxe2: update switchdev repr VSI ID display format liujie5
2026-08-16 2:52 ` [PATCH v2 03/13] net/sxe2: add ACL engine event statistics support liujie5
2026-08-16 2:52 ` [PATCH v2 04/13] net/sxe2: enhance device cap and res management liujie5
2026-08-16 2:52 ` [PATCH v2 05/13] net/sxe2: improve representor device initialization liujie5
2026-08-16 2:52 ` liujie5 [this message]
2026-08-16 2:52 ` [PATCH v2 07/13] net/sxe2: validate IPsec key length against maximum limit liujie5
2026-08-16 2:52 ` [PATCH v2 08/13] net/sxe2: enhance repr event handling and MP code liujie5
2026-08-16 2:52 ` [PATCH v2 09/13] net/sxe2: optimize vectorized Tx/Rx path liujie5
2026-08-16 2:52 ` [PATCH v2 10/13] common/sxe2: allow munmap during kernel reset liujie5
2026-08-16 2:52 ` [PATCH v2 11/13] net/sxe2: clean up duplicate function declarations liujie5
2026-08-16 2:52 ` [PATCH v2 12/13] net/sxe2: clean up structure definitions liujie5
2026-08-16 2:52 ` [PATCH v2 13/13] doc/sxe2: add acl-stat-type parameter documentation liujie5
2026-08-16 16:29 ` [PATCH v2 00/13] driver/sxe2: fix bugs Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260816025233.2727226-7-liujie5@linkdatatechnology.com \
--to=liujie5@linkdatatechnology.com \
--cc=dev@dpdk.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.